Roma Heating Wi5 Wi-Fi Digital Heating Thermostat Installational Manual

Contents hide

1 Roma Heating Wi5 Wi-Fi Digital Heating Thermostat

2 REFERENCE:

Roma Heating Wi5 Wi-Fi Digital Heating Thermostat

Thank you for purchasing one of our products and for your support.

Download the Smart Life app from the IOS or Android Store. And create a unique account and password.
On the home screen of smart life. Press on the area highlighted to add a thermostat to the App.
On the next screen please select small home appliances and then search the list until you reach the thermostat (Wi-fi).
Select your Wi-Fi network and enter the Password for your router at home. Press Next.
To get the thermostat ready to pair to the device/app, hold the Set & OK buttons on the thermostat until both the cloud & wi-fi symbols appear flashing together. If the cloud only appears then let go and then press the Set & OK button again until both symbols appear on the left of the screen. Please also make sure the device is reset first. Once both symbols appear on the screen of the thermostat, select blink quickly after tapping next on reset the device screen (see screenshot).
The thermostat should now pair with the device.
If the thermostat fails to connect to the thermostat then repeat steps 2,3 and 4. Hold down the Set and OK buttons until the cloud symbol only appears on the thermostat screen. Select Blink slowly at the bottom left of the screen on the smart life app. Press go to connect on the next page.
This should take you directly Into your phone settings (See Below).
If not then exit the app (Don’t Close) and go into settings as shown below (Middle Screenshot). Then select Smart Life in ‘my Networks’ or ‘wi Fi Network’
You should then be directed back to the app. If not go back into the app and the countdown screen should appear.