Rolbit C650UFB Under Floor Thermostat
Important Instruction
- UNDERFLOOR FLUSH MOUNT THERMOSTAT.
- OPARATES DIRECT FROM 230 VALTS.
- REMOTE ROOM TEMPERATURE SENSOR OPTION.
- REMOTE UNDER FLOOR LIMITER SENSOR (PROTECTION) OPTION.
- DISCONNECT BOTH 230 VOLTS PHASE AND NEUTRAL LINES.
- FULL DIGITAL CONTROL – DISPLAY, BACK LIGHT AND BUZZER.
- Operate electrical heater or water valves.
- Easy Screw terminals for field connection.
- Prefabricated temperature sensors.
- Temperature Offset setting.
- Selection of limiting sensor temperatures range.
- Icon for Under floor element operation.
- Start and Stop Timers.
SPECIFICATIONS
When Ordering Use The Following Part Number
LINE IN – 230 VOLTS
LINE OUT LOAD – 16 AMPS
OPERATING FEATURES
- Nominal operating voltage 230 VAC.
- On / Off operation.
- Screw the terminal connection.
- Backlight and Buzzer for bottom press indication.
- Start and Stop Timers.
- Room temperature display by pressing both Up and Down bottom.
- Room temperature offset.
- Limiting (protection) sensor range.
INSTALLATION REQUIREMENTS
- Flexible multi–strand cables rated 250 volts (ø0.5mm minimum).
- The thermostat is to be located in an air-conditioned area.
- Installing on internal walls only.
- Minimum height of 1.5 meter from the floor is required.
- Drives direct resistive load up to 16 Amps. Above 16 Amps or 3 Phase, external contactor must be used.
ADD ON OPTIONS
- External room temperature. Prefabricated or on lead wire.
- External limiting (protection) sensor. Prefabricated or lead wire.
- Operation on 120 volts – P/N C650UFB-P2-1.
Rolbit
REFERENCE:
DOWNLOAD MANUALS:
Rolbit C650UFB Under Floor Thermostat USER MANUAL
Rolbit C650UFB Under Floor Thermostat USER MANUAL