Statement of use
The 6020 can be used with millivolt, 24VAC, 1 and 2 stage conventional gas/oil/elec heat, 1 and 2 stage heat pumps, 2 or 3 wire zoned hot water, zoned forced air, 1 and 2 stage cooling and hybrid systems. It cannot be used with 120 volt heating systems.
Set HEAT/COOL mode switch to HEAT or COOL. The unit will display the Room temperature. Set the Fan switch to AUTO.
When the batteries are low, the battery icon will flash. The two AAA batteries in the unit need to be replaced. The HVAC system will stop functioning when the thermostat loses power; replace batteries as soon as you see this warning. Press RESET after replacing the batteries
The F/C jumper is under the top cover Jumper #5. It determines which temperature system is displayed on the LCD display. With the jumper off, the display is Fahrenheit (default setting), with the jumper on both pins, the display is Centigrade. When the jumper is changed, the unit must be reset (under the top cover on the left).
To set a Heat Pump’s Aux-only mode
If you have a heat pump with auxiliary heat, and the heat pump is not working, you can use the auxiliary heat only by moving jumper 1 [heat pump] to jumper position 2 [ Aux only
Ritetemp
DOWNLOAD MANUAL:
Ritetemp 6020 Digital thermostat Operational Manual
other manuals:
Ritetemp 6020 Digital thermostat Installation Manual
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…