Information regarding installation and operating instructions
These installation and operating instructions serve the installer to install the room thermostat professionally and to set it into operation.
Other valid documents:
Manuals of all system components, regulations for prevention of accidents as well as rules of technology.
Keeping of documents
These installation and operating instructions should be kept by the user of the system
Symbol explanation
Safety guidelines are displayed by symbols. These guidelines are to be observed to prevent accidents, damage to property and malfunctions.
DANGER!
Imminent danger to life and limb!
Attention!
Potential dangerous situation for product, system or environment!
Note!
Useful information and notes!
Copyright
The installation and operating instructions are copyrighted.
Correct use
Transport inspection
Upon receipt, check delivery for any damages caused during transit. Any damages must be reported immediately upon receipt.
Storage
The room thermostat must only be stored under the following conditions:
· Do not store in open air, keep dry and free from dust.
· Do not expose to aggressive fluids or heat sources.
· Protect from direct sunlight and mechanical agitation.
· Storage temperature: 0 up to 40°C, max. relative humidity of air: 95 %
Packaging
All packaging material must be disposed of environmentally friendly
Performance data
Summary / Functional description
The digital room thermostat is used for room temperature control in self-contained rooms. The room temperature is controlled via a valve which is activated through an actuator. When the room temperature has reached the nominal value, the valve will be closed. Setting of the nominal value by key stroke, visualisation on a large LCD display with blue backlighting. The backlighting is active when pressing the keys. Settings can be stored.
Application range
The digital room thermostat can be used in combination with the Oventrop two point actuators (M 30 x 1.5) for individual room temperature control
Extent of supply
Before installing the room thermostat, please check delivery for completeness and any damages caused during transit.
Switch off current supply
Open casing by pushing back the snap hooks at the lower side with a 3.5 mm screwdriver. Carry out wiring according to the wiring diagram (Illustr. 6.2). Now fix casing with the help of the enclosed screws (Illustr. 6.1) and close it again
The installation location of the room thermostat must comply with the following conditions:
The display shows the current room temperature (RT) at the installation location. The current time and day of the week, the symbol
Switching the thermostat off/on
The thermostat and display are switched off by pressing the key
Frost protection mode
To activate the frost protection, switch the thermostat off by pressing the key
Now keep the key M pressed for about 3 seconds. “00“ (inactivated) appears on the display. Now choose “01“ (activated) by pressing the key
The symbol appears if the frost protection mode is activated and the room thermostat is switched off. If the room temperature drops below 5°C, the thermostat is switched on automatically. The room temperature is now increased to 7°C. Having reached this value, the thermostat is switched off again automatically.
Temperature calibration
Temperature calibration must only be carried out if the indicated temperature is not correct. Switch off the room thermostat by using the key
Normal operating mode
Modification of the operating mode
The operating mode can be chosen by pressing the key for 3 seconds (thermostat is switched on).
Setting the time and the day of the week
Press the key
Setting of the timer
If the operating mode “TIMER ON/OFF“ and the symbol
There are two ways to switch off the operating mode:
Setting of the weekly program
Example
Room temperature for the days of the week shall be set as follows.
Temperature sequence: Required setting:
The room thermostat must only be cleaned with mild detergent. Detergents must not penetrate the room thermostat, they must not be sprayed onto the thermostat but onto a cleaning cloth.
General terms and conditions of sale and delivery
Oventrops general terms and conditions of sale and delivery valid at the time of supply are applicable.
DOWNLOAD MANUALS:
Oventrop EC010927 Digital Room Thermostat User Manuals
OTHER MANUALS:
Oventrop EC010927 Digital Room Thermostat Technical information
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…