OJ ELECTRONICS

OJ ELECTRONICS MCD5 Touch Thermostat Product Specifications Guide

OJ ELECTRONICS MCD5 Touch Thermostat

Introduction

MCD5-1999

  • 2” colour touch display
  • User-friendly interface
  • Energy monitoring
  • QR-code readouts
  • Compatible with existing floor sensors

“All-in-one” clock thermostat for electric underfloor heating creates optimal comfort temperature and the lowest possible energy consumption.

  • Easy touch menu navigation
  • 12 different language choices
  • Set and forget! Adaptive control for comfort temperature when required – prepared for the new EU ECO directive requirements.
  • Snap-mount front cover for easy installation
  • Compatible with existing floor sensors, making it the best choice for renovations
  • Built-in holiday calendar and clock function for automatic comfort and setback
  • Automatically adjusts to daylight saving time
  • 5-year battery backup of clock and calendar
  • QR-code readouts for easy handling and support
  • Power measurement for optimal energy management

Thermostat control
Electronic thermostat for temperature control via a sensor placed either externally on the floor or built into the thermostat.

Built-in clock/calendar with battery backup
Includes 4- and 6-event programs for automatic comfort and setback temperature. Up to 7 different program combinations can be created, where a program consists of working days and home days.

Color display
Unique user interface with new menus and touch-based navigation for easy programming and readouts.

Dimension

Function

Monitoring of energy consumption
Total switch-on can be read out for overall energy consumption monitoring.

Factory-set of events
The thermostat is delivered with factory-set programs:

DAY 1-5 (working days)

EVENT TIME/TEMPERATURE

  • 1 06:00-08:00 Comfort 20 °C
  • 2 08:00-16:00 Setback 15 °C
  • 3 16:00-23:00 Comfort 20 °C
  • 4 23:00-06:00 Setback 15 °C

DAY 6-7 (home days)

EVENT TIME/TEMPERATURE

  • 1 06:00-23:00 Comfort 20 °C
  • 4 23:00-06:00 Setback 15 °C

Individual programming of events
The factory-set periods and/or temperatures can be adjusted as necessary.

The following programs can also be selected
Choose between 4- or 6-event scheduler. Up to seven different event program combinations can be used. Choose between the method “work-/home-days” or “individual days” programming.

Comfort mode
The room temperature can be temporarily changed for a selected number of hours. The thermostat will then return to the scheduled event program.

Manual mode
The scheduled event program can be canceled for constant temperature operation.

Holiday mode
Program a planned holiday period and the thermostat will start automatically. The thermostat will automatically set the temperature set point to 5 °C during the entire holiday period programmed.

Boost mode
Activate a boost period of one hour to rapidly increase the temperature. The thermostat will then return to normal operation.

Frost protect mode
Frost protection mode can be activated if no heat is needed. (Ensures no frost damage at low temperatures).

ECO mode
The lowest set point programmed in the schedule will by activating the ECO Mode be used permanently until the ECO Mode is deactivated.

TECHNICAL DATA

  • Supply voltage 100-240 V AC, 50/60 Hz
  • Standby power < 0.5 W
  • Output relay SPST 16 A, resistive load or 1 A inductive load
  • Interrupter 2-pole, 16 A
  • Floor limit range +5/+40 °C
  • Clock function Up to seven different 4- or 6-event program combinations
  • Battery backup
    • Settings forever
    • 5 years for Clock and Calendar
  • Ambient temperature 0/+40 °C during operation
  • On/Off differential 0.4 °C
  • Regulation principle PWM / PI
  • Housing IP21
  • Standard sensor type NTC (12 KΩ) 3 m.
    • Thermostat compatible with existing common sensors on the market
  • Dimensions (H/W/D) 84/84/40 mm (21.8 mm depth)
  • Display 220 x 176 pixel TFT – Color resistive touch
  • EU Registered Design Yes
  • Approvals: CE, VDE, BEAB, NEMKO

OJ ELECTRONICS A/S
STENAGER 13B DK-6400 SØNDERBORG DENMARK

REFERENCE:

DOWNLOAD MANUALS:

OJ ELECTRONICS MCD5 Touch Thermostat Product Specifications Guide

OTHER MANUALS:

OJ ELECTRONICS MCD5 Touch Thermostat User Manual

OJ ELECTRONICS MCD5 Touch Thermostat Instruction Manual

OJ ELECTRONICS MCD5 Touch Thermostat Product Specifications Guide

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago