OEM Ktw-12 Programmable Room Thermostat
Specification
- Warranty: 1 Year
- Application: heating floor
- Place of Origin: Zhejiang, China
-
Model Number: KTW-12
- Product name: automatic thermostat
- Power supply: AC220v(50/60Hz)
- Size: 86mmx86mmx3mm
- After–sale Service: Online technical support
- Design Style: Modern
- Brand Name: Kangteng/OEM Accepted
- Usage: Underfloor Heating Controls System
- Protection class: IP40
Introduction
The OEM Ktw-12 Programmable Room Thermostat is a device used for controlling the temperature in a room. It is programmable, which means that users can set different temperature settings for different times of the day. This thermostat is commonly used in homes and commercial buildings to improve energy efficiency and comfort. The Ktw-12 thermostat has a sleek and modern design, and it can be easily mounted on a wall. It features a large LCD display that shows the current temperature and the programmed temperature settings. The thermostat also has a backlight for easy reading in low light conditions.
One of the main benefits of the Ktw-12 thermostat is its programmable nature. Users can set different temperature settings for different times of the day, which can help save energy and reduce utility costs. The thermostat also has a temperature range of 5 to 35 degrees Celsius, which allows for precise temperature control.the OEM Ktw-12 Programmable Room Thermostat is a reliable and efficient device that can help improve energy efficiency and comfort in homes and commercial buildings.
What Is In The Box
- Thermostat
- User Manual
- External Sensor
- Screws
Installation
- Read the installation manual: Before starting the installation process, read the installation manual provided with the thermostat. This will give you an idea of what is involved in the installation process and what tools you will need.
- Turn off the power: Before starting the installation, turn off the power to the heating or cooling system at the circuit breaker.
- Remove the old thermostat: Remove the cover of the old thermostat and disconnect the wires from the terminals. Make a note of which wire is connected to which terminal.
- Install the new thermostat: Mount the new thermostat on the wall using the screws provided. Connect the wires from the heating or cooling system to the corresponding terminals on the new thermostat. If the new thermostat requires batteries, install them now.
- Program the thermostat: Once the thermostat is installed, program it according to your heating and cooling needs. Follow the instructions in the manual to set the time, date, and temperature settings.
- Test the thermostat: After programming the thermostat, turn on the power to the heating or cooling system and test the thermostat to make sure it is working correctly. Adjust the temperature settings as needed.
- Finish the installation: Replace the thermostat cover and clean up any debris or dust from the installation process.
- How To WORK
- Read the User Manual: Before using the OEM Ktw-12 Programmable Room Thermostat, read the user manual provided by the manufacturer. This will give you an overview of the product and its features, as well as instructions on how to operate it.
- Installation: Install the thermostat according to the instructions provided in the user manual. Typically, the thermostat should be mounted on a wall, away from direct sunlight, drafts, and sources of heat.
- Power On: Once the thermostat is installed, turn on the power supply.
- Set Date and Time: Set the date and time on the thermostat. This is necessary for the thermostat to operate correctly.
- Set Heating Schedule: Use the programming function to set the heating schedule according to your needs. This will allow you to program the thermostat to switch on and off the heating system at specific times of the day.
- Adjust Temperature: Adjust the temperature according to your preference. You can do this by using the up and down arrows on the thermostat.
- Monitor the Thermostat: Monitor the thermostat to ensure that it is functioning correctly. Check the display to see if the temperature is set correctly and that the heating system is operating as programmed.
- Troubleshooting: If you encounter any issues with the thermostat, refer to the troubleshooting section in the user manual. This will provide solutions to common problems that you may encounter.
- How To Operate
- Set the clock: First, you need to set the clock on the thermostat. This is usually done by pressing the “clock” button and then using the “+” and “-” buttons to set the correct time.
- Set the desired temperature: Once you have set the clock, you can set the desired temperature for your room. This can be done by pressing the “temperature” button and then using the “+” and “-” buttons to set the temperature you want.
- Set the schedule: The Ktw-12 thermostat allows you to set different temperatures for different times of the day. To do this, you need to use the “program” button. Press it and then use the “+” and “-” buttons to set the temperature for each time slot.
- Save the schedule: Once you have set the schedule, you need to save it by pressing the “program” button again. This will save your settings and activate the program.
- Override the schedule: If you want to temporarily override the schedule and change the temperature manually, you can do so by pressing the “override” button. This will allow you to adjust the temperature manually until the next programmed time slot.
- Turn the system on/off: Finally, you can turn the heating or cooling system on/off by pressing the “on/off” button.
USAGE
- Turn on the power supply of your thermostat. The display should light up, and you will see the current temperature reading.
- Press the “SET” button to access the programming mode. You will see the day of the week flashing on the display.
- Use the “+” and “-” buttons to set the current day of the week. Once you have selected the correct day, press the “SET” button again.
- The thermostat will now display the current time. Use the “+” and “-” buttons to set the correct time.
- Once you have set the correct time, press the “SET” button again. The thermostat will now display the temperature that you have previously set as your desired temperature.
- Use the “+” and “-” buttons to adjust the temperature to your desired setting.
- Press the “SET” button again to confirm your desired temperature.
- You can repeat this process to program different temperature settings for different times of the day or week.
- Once you have set all the desired temperature settings, press the “RUN” button to activate the programming. The thermostat will now automatically adjust the temperature according to your programmed settings.
OEM Ktw-12 Programmable Room Thermostat User Manual