OCSTAT STN3001 Non-Programmable Thermostat User Manual

OCSTAT STN3001 Non-Programmable Thermostat

Introduction

The OCSTAT STN3001 is a non-programmable thermostat designed to control heating and cooling systems in residential and commercial settings. It provides a straightforward and user-friendly interface for adjusting temperature settings and maintaining a comfortable indoor environment. With its non-programmable functionality, the OCSTAT STN3001 offers simplicity and ease of use. Unlike programmable thermostats, it does not include advanced scheduling features or the ability to create customized temperature programs. Instead, users manually set the desired temperature and the thermostat maintains that temperature until it is manually adjusted again. The OCSTAT STN3001 features a clear LCD display that shows the current temperature, allowing users to monitor and adjust settings at a glance. It typically includes buttons or a touch interface for adjusting the temperature up or down, as well as additional buttons for switching between heating and cooling modes.

This thermostat is compatible with a variety of heating and cooling systems, including furnaces, heat pumps, and air conditioning units. It is designed to be easy to install and can replace most standard thermostats without requiring additional wiring or modifications to the HVAC system. Overall, the OCSTAT STN3001 non-programmable thermostat provides a simple and reliable solution for controlling the temperature in homes and businesses without the need for advanced scheduling or programming features.

Specification

• Model No.: STN3001 / STN3201
• Programmability: Non Programmable
• Temperature Range (˚F): 32˚F-99˚F (1°C-40°C)
• Control Temp.Range (˚F): 44˚F-90˚F (7°C-32°C)
• Temp.Meas.Accuracy: ±1°C (at 20°C)
• Power Source:  DC 2 x AAA 1.5V Alkaline batteries
• 24VAC (18~30VAC), 50/60 Hz for hardwire (common wire)
• Dimensions: 138 x98 x28 mm

What Is In The Box

• Thermostat
• User Manual
• Screws
• External Sensor

Feature

• 1 Heat / 1 Cool
• Non-programmable
• Batteries or 24V power
• Large, easy to read clear LCD display
• Various backlight colors optional
• Electric or Gas configurable
• Separate B & O terminals
• Separate heating and cooling swing (cycle rate) adjustments
• Room temperature calibration adjustable
• 5-minute compressor delay protection (selectable on or off)
• Contemporary design

Usage

• Temperature Control: The STN3001 allows you to manually adjust and set the desired temperature in your space. It is typically used to control heating and cooling systems such as furnaces, boilers, central air conditioners, and heat pumps.
• Non-Programmable: Unlike programmable thermostats that offer scheduling options, the STN3001 does not have the ability to create specific temperature settings for different times of the day. It provides basic temperature control without any advanced programming features.
• User-Friendly Interface: The thermostat features a simple interface with a digital display that shows the current temperature and allows you to adjust the desired temperature using buttons or a dial.
• Installation: The installation process for the STN3001 is similar to other thermostats. It requires basic wiring connections to your heating and cooling system. It is recommended to consult the product manual or hire a professional if you are not familiar with thermostat installation.
• Compatibility: Before purchasing the STN3001, it’s important to ensure compatibility with your heating and cooling system. It is generally compatible with standard 24-volt HVAC (Heating, Ventilation, and Air Conditioning) systems.
• Energy Efficiency: While the STN3001 lacks advanced energy-saving features like programmable schedules, it still allows you to manually adjust the temperature according to your comfort level. By setting it to appropriate temperatures during occupied and unoccupied periods, you can optimize energy consumption.
• Limitations: As a non-programmable thermostat, the STN3001 does not offer features such as setting temperature setbacks, adjusting temperatures remotely, or creating customized schedules. If you require more advanced features or automation, you may want to consider programmable or smart thermostats.

FAQS

What is the OCSTAT STN3001 Non-Programmable Thermostat?
The OCSTAT STN3001 is a non-programmable thermostat used for controlling heating and cooling systems in residential and commercial buildings.

How does the OCSTAT STN3001 thermostat work?
The thermostat uses temperature sensors to detect the current room temperature and sends signals to the HVAC (heating, ventilation, and air conditioning) system to maintain the desired temperature.

Is the OCSTAT STN3001 thermostat compatible with all HVAC systems?
The OCSTAT STN3001 is designed to work with most standard 24-volt heating and cooling systems, including single-stage systems like gas, oil, or electric furnaces, and central air conditioning systems.

Can the OCSTAT STN3001 thermostat be used to control multiple heating or cooling zones?
No, the STN3001 is a single-zone thermostat and is not designed to control multiple zones independently.

Does the OCSTAT STN3001 thermostat have a backlight?
Yes, the STN3001 thermostat features a built-in backlight for easy visibility in low-light conditions.

Can the OCSTAT STN3001 thermostat be used with a heat pump system?
Yes, the STN3001 thermostat is compatible with heat pump systems, but it is important to ensure proper wiring and configuration during installation.

Does the OCSTAT STN3001 thermostat support Fahrenheit and Celsius temperature scales?
Yes, the thermostat allows you to choose between Fahrenheit and Celsius temperature scales based on your preference.

Does the OCSTAT STN3001 thermostat have a battery backup?
No, the STN3001 thermostat does not have a battery backup. It operates on standard 24-volt power from the HVAC system.

Is the OCSTAT STN3001 thermostat programmable?
No, the STN3001 is a non-programmable thermostat, meaning it does not have a built-in schedule for automatic temperature adjustments.

Can the OCSTAT STN3001 thermostat be locked to prevent tampering?
Yes, the thermostat has a lockout feature that allows you to restrict access to the temperature settings, preventing unauthorized changes.

Does the OCSTAT STN3001 thermostat have a filter change reminder?
No, the STN3001 thermostat does not have a built-in filter change reminder. It focuses primarily on temperature control.

Can the OCSTAT STN3001 thermostat be controlled remotely through a smartphone app?
No, the STN3001 thermostat does not have remote control capabilities or smartphone app integration. It is operated directly through its interface.

Does the OCSTAT STN3001 thermostat have energy-saving features?
As a non-programmable thermostat, the STN3001 does not have advanced energy-saving features like scheduling or adaptive algorithms. It primarily provides manual temperature control.

Is the OCSTAT STN3001 thermostat easy to install?
The STN3001 thermostat is designed for simple installation, but it is recommended to follow the provided installation instructions or consult a professional if unsure.

Does the OCSTAT STN3001 thermostat come with a warranty?
Warranty terms may vary, but the thermostat typically comes with a limited manufacturer’s warranty covering defects in materials and workmanship. It is advisable to check the warranty details at the time of purchase.

OCSTAT STN3001 Non-Programmable Thermostat User Manual