OCSTAT ST2603RF Wireless Simple Thermostat User Manual

Specifications

Transmitter (thermostat):

• Model No.: ST2603RF
• Switchable Voltage: 24 V AC / DC,…250 V AC; 50 Hz
• Switchable Current: 6 A (2 A inductive load)
• Programmability: Non-Programmable
• Temperature Range (°C): 0°C-40°C in 0.1°C
• Control Temp.Range (°C): 5°C-35°C in 0.5°C
• Temp.Meas.Accuracy: ±1°C (at 20°C)
• Power Source:  DC 2 x AAA 1.5V Alkaline batteries
• Dimensions: 130 x86 x30 mm

Receiver:

• Power Supply: 230VAC, 50HZ
• Operating Frequency:868.35MHZ
• Transmission Distance: approx. 200m in open terrain
• Consumption: 6W
• Maximum Load: 6(2)A, 230V
• Dimensions: 86 x 86 x 26 mm

HOW TO OPERATE

Please adhere to the following basic instructions to use the OCSTAT ST2603RF Wireless Simple Thermostat:

• Install Batteries: According to the manufacturer’s instructions, remove the thermostat’s battery cover and place the necessary batteries inside. Follow the proper polarity, of course.
• Thermostat Mount: Decide where the thermostat should be mounted on an interior wall. Make sure it’s out of the path of the sun, drafts, and heat-producing equipment.
• To set the temperature, turn the thermostat’s dial or the up and down buttons to the desired setting. The thermostat’s screen will show the specified temperature as well as the current temperature.
• You may be able to change the fan to several settings (such as Auto or On) if your heating or cooling system contains a fan. To choose the right fan setting, read the thermostat’s instructions to get familiar with the options.
• If the thermostat has wireless remote control, make sure they are linked and connected to the thermostat. Observe the manufacturer’s specified pairing guidelines.
• Test the thermostat: After changing the fan speed and temperature, see whether the heating or cooling system operates as intended. To obtain the desired temperature, the system must turn on. Fine-tune
• Temperature Settings: If you decide the current temperature is too high, you may use the thermostat settings to lower it till it is.
• Keep an eye on the thermostat’s display to keep track of the temperature as it is now and make any necessary adjustments. You may, if necessary, change the temperature further to meet your comfort needs.
• Battery Replacement: Monitor the life of your thermostat’s batteries and swap them out as necessary to keep the gadget functioning properly.
• A wireless basic thermostat like the OCSTAT ST2603RF may be operated in general using the procedures listed below.
• It’s vital to refer to the manufacturer’s user manual for detailed instructions pertaining to your thermostat model.

FAQS

The OCSTAT ST2603RF Wireless Simple Thermostat is what it sounds like.

Users of the OCSTAT ST2603RF wireless simple thermostat may wirelessly regulate the temperature in their environment.

WHAT The OCSTAT ST2603RF Wireless Simple Thermostat’s operation is described.

The thermostat uses wireless communication to send temperature and control signals between the thermostat and the heating or cooling system.

Does the OCSTAT ST2603RF have a battery?

Yes, the OCSTAT ST2603RF normally runs on batteries, making installation simple and eliminating the need for extra cabling.

Is it possible to configure the temperature settings on the OCSTAT ST2603RF?

No, the OCSTAT ST2603RF thermostat is a straightforward model without programmed temperature controls. Users may manually change the temperature as necessary.

Can the OCSTAT ST2603RF be remotely controlled?

The OCSTAT ST2603RF does indeed provide remote control functions. Using a wireless remote control that is compatible, you may operate it from a distance.

What heating and cooling systems are compatible with the OCSTAT ST2603RF?

Boilers, furnaces, heat pumps, and air conditioners are just a few of the heating and cooling systems that the OCSTAT ST2603RF is designed to work with.

Can more than one temperature zone be utilized with the OCSTAT ST2603RF?

The OCSTAT ST2603RF, on the other hand, is a single-zone thermostat, able to regulate the temperature of a single room or space at a time.

Is there a built-in display on the OCSTAT ST2603RF?

The thermostat does include an integrated digital display that displays the set temperature, the current temperature, and other useful data.

The OCSTAT ST2603RF may it show the temperature in many units, such as Celsius or Fahrenheit.

Yes, the OCSTAT ST2603RF allows customers to select between Celsius and Fahrenheit for the display of temperature in multiple units.

Is it simple to install the OCSTAT ST2603RF?

The OCSTAT ST2603RF is intended to be installed simply. There is no need for intricate wiring since it is battery-powered and wireless.

Can underfloor heating systems be utilized with the OCSTAT ST2603RF?

If your underfloor heating system complies with the OCSTAT ST2603RF’s voltage and wiring specifications, you may use it with it.

Are there any energy-saving features on the OCSTAT ST2603RF?

The OCSTAT ST2603RF is not a sophisticated thermostat with customizable schedules or occupancy detection; instead, it is a simple thermostat.

Can smart home systems be integrated with the OCSTAT ST2603RF?

No, the OCSTAT ST2603RF lacks the ability to integrate with smart homes at the factory.

Is there a backlight on the OCSTAT ST2603RF for improved visibility in low-light situations?

Yes, the backlight function of the OCSTAT ST2603RF often improves visibility in low light, making it simpler to see the display.

What is the duration of the OCSTAT ST2603RF’s warranty?

Depending on the manufacturer and location, the OCSTAT ST2603RF’s warranty duration may change. It is best to refer to the product’s instructions or get in touch with the maker for particular warranty information.