OCSTAT S2301RF Wireless Thermostat User Manual

OCSTAT S2301RF Wireless Thermostat

INTRODUCTION

The user-friendly and adaptable OCSTAT S2301RF Wireless Thermostat is a thermostat designed to provide practical temperature management in household or business areas. The S2301RF provides flexibility and simple installation thanks to its wireless capabilities, doing away with the need for intricate wiring. The S2301RF thermostat makes precise measurements of the outside temperature and adjusts the heating or cooling system as necessary. Because of its wireless construction, it can be placed and moved about the room easily, giving you the freedom to regulate the temperature from various points. The S2301RF Wireless Thermostat’s programmable capability is one of its primary advantages. In order to maintain maximum comfort and energy efficiency throughout the day, users may choose several temperature regimens. The thermostat aids in energy conservation and lowers utility expenses by setting temperature setbacks for times when no one is home. The thermostat has an easy-to-use interface with a clear digital display that shows the current temperature, the programmed temperature, and other important information. It also has simple controls for programming and temperature adjustment. The S2301RF has a wireless connection, which enables remote control capabilities. Users may easily change the thermostat settings using a remote control device, such as a smartphone or tablet, by adding a wireless receiver that is compatible. With the use of this function, customers may adjust the temperature even when they are far from the thermostat, giving them flexibility and convenience. The S2301RF Wireless Thermostat’s wireless construction makes installation easier. It makes it simpler for both expert installers and DIY enthusiasts by getting rid of the requirement for intricate wire connections. Boilers, furnaces, heat pumps, and air conditioners are just a few of the heating and cooling equipment that the thermostat is compatible with. Overall, the OCSTAT S2301RF Wireless Thermostat provides a simple and adaptable temperature management option. It is a good option for boosting comfort and energy efficiency in a variety of household and business contexts because of its wireless capabilities, customizable flexibility, and simple installation.

Specifications

Transmitter (thermostat):

• Model No.: S2301RF
• Switchable Voltage: 24 V AC / DC,…250 V AC; 50 Hz
• Switchable Current: 6 A (2 A inductive load)
• Programmability: Non-Programmable
• Temperature Range (°C): 0°C-40°C in 0.1°C
• Control Temp.Range (°C): 5°C-35°C in 0.5°C
• Temp.Meas.Accuracy: ±1°C (at 20°C)
• Defrosting Temperature: +7°C
• Power Source:  DC 2 x AAA 1.5V Alkaline batteries
• Dimensions: 118 x80 x26 mm(without holder)

Receiver:

• Power Supply: 230VAC, 50HZ
• Operating Frequency:868.35MHZ
• Transmission Distance: approx. 200m in open terrain
• Consumption: 6W
• Maximum Load: 6(2)A, 230V
• Dimensions: 86 x 86 x 26 mm

Features

• Large clear LCD display
• Various backlight colors optional
• HEAT (Heating) / COOL (Cooling) / OFF (Frost Protection)
• Room Temperature Calibration adjustment (in -3~+3°C)
• Contemporary design
• Simple Operation
• Easy installation

USAGE

The OCSTAT S2301RF Wireless Thermostat is intended for use in homes or businesses to regulate temperature. Here are a few useful examples that are typical:

• Wireless Communication: The OCSTAT S2301RF connects to the heating or cooling system wirelessly, giving you more freedom to set the thermostat anywhere you choose in the room.
• Temperature Control: The thermostat’s main job is to control the temperature by turning on or off the heating or cooling system according to the preset temperature.
• Adaptable comfort and energy efficiency are provided by the thermostat’s programmable temperature settings, which users may select for various periods of the day or week.
• The OCSTAT S2301RF comes with a wireless remote control that enables users to change the temperature and other settings from a distance within the predetermined range.
• Temperature Display: The thermostat has an integrated digital display that displays the set temperature, the current temperature, and other pertinent data.
• Boilers, furnaces, heat pumps, and air conditioners are just a few of the heating and cooling systems that the OCSTAT S2301RF is designed to work with. Energy-
• Saving Features: To optimize energy use and save utility costs, the thermostat may include energy-saving features such as programmable schedules, temperature setbacks, and occupancy detection.
• Manual Temperature Adjustment: Using the thermostat or the wireless remote control, users may manually change the temperature at any moment. Easy-to-
• Use Controls: The thermostat normally includes simple controls and an intuitive interface, making it simple for users to use and configure.
• Holiday and Vacation Modes: The OCSTAT S2301RF comes with holiday and vacation modes in certain versions, which let users temporarily alter the usual schedule during protracted absences.
• Battery Backup: To guarantee that it keeps running and preserves preset settings in the event of a power interruption, the thermostat often comes with a battery backup.
• Installation: Depending on the precise wiring requirements of the heating or cooling system, the installation procedure for the OCSTAT S2301RF may vary.
• For effective installation, it is advised to adhere to the manufacturer’s guidelines or seek expert assistance.
• The wireless range of the thermostat’s remote control, within which it may interact with the thermostat, is predetermined. For effective control, users should make sure they are inside this range.
• Troubleshooting and assistance: To help users with any technical difficulties or inquiries about the operation of the thermostat, the manufacturer normally offers troubleshooting instructions and customer assistance.
• Warranty: The warranty time for the OCSTAT S2301RF is provided, however, it may vary according to the manufacturer and the location. It is best to refer to the product’s instructions or get in touch with the maker for particular warranty information.
• It is advised to refer to the user manual that the manufacturer has given for the OCSTAT S2301RF Wireless Thermostat if you want particular instructions or information on how to use it.

FAQS

The OCSTAT S2301RF Wireless Thermostat: What is it?

The wireless OCSTAT S2301RF thermostat is used to regulate the temperature in household or business settings.

What is the operation of the OCSTAT S2301RF Wireless Thermostat?

The thermostat adjusts the temperature depending on user preferences by wirelessly communicating with the heating or cooling system.

Is it simple to install the OCSTAT S2301RF?

Yes, since it doesn’t need intricate wire connections, the OCSTAT S2301RF is designed for simple installation.

Is the OCSTAT S2301RF battery operated?

The OCSTAT S2301RF uses batteries to power the thermostat, therefore the answer is yes. Standard AA or AAA batteries are usually used.

Can alternative temperature settings be programmed into the OCSTAT S2301RF?

The OCSTAT S2301RF does, in fact, feature programmable temperature settings that let users set various temperatures for various periods of the day or week.

Is there a built-in display on the OCSTAT S2301RF?

The thermostat does include an integrated digital display that displays the set temperature, the current temperature, and other useful data.

Can the OCSTAT S2301RF be remotely controlled?

Yes, the OCSTAT S2301RF may be accessed and operated remotely using a smartphone or computer by using a separate wireless receiver or gateway device that is connected to the internet.

Are several temperature zones supported by the OCSTAT S2301RF?

The OCSTAT S2301RF, on the other hand, is a single-zone thermostat, able to regulate the temperature of a single room or space at a time.

Can underfloor heating systems be utilized with the OCSTAT S2301RF?

If your underfloor heating system complies with the OCSTAT S2301RF’s voltage and wiring specifications, you may use it with it.

Are there any energy-saving features on the OCSTAT S2301RF?

In order to maximize energy usage, the OCSTAT S2301RF often comes with energy-saving features including programmable schedules, temperature setbacks, and the ability to detect occupancy.

Does the OCSTAT S2301RF have the ability to show the temperature in other units, such as Celsius or Fahrenheit?

Yes, the OCSTAT S2301RF allows customers to select between Celsius and Fahrenheit for the display of temperature in multiple units.

Are other wireless systems and devices compatible with the OCSTAT S2301RF?

The OCSTAT S2301RF is designed to work with various wireless systems and devices, including wireless receivers and gateways for remote monitoring and control.

Is the OCSTAT S2301RF compatible with smart home technology?

Yes, the OCSTAT S2301RF is compatible with certain smart home systems and can be controlled and monitored by users using voice commands or mobile applications.

Is there a vacation mode or holiday setting on the OCSTAT S2301RF?

The OCSTAT S2301RF does, in fact, often come with a vacation mode or holiday option that enables users to set a temporary temperature setback for lengthy absences.

What is the OCSTAT S2301RF’s wireless communication range?

Depending on the surroundings, the wireless communication’s range may vary, but normally the OCSTAT S2301RF has a range of several meters or more within a single structure.

OCSTAT S2301RF Wireless Thermostat User Manual