OCSTAT OCTK601AC Non-programmable Thermostat User Manual

OCSTAT OCTK601AC Non-programmable Thermostat

INTRODUCTION

The non-programmable OCSTAT OCTK601AC thermostat is designed to provide straightforward and efficient temperature management for your heating and cooling systems. This thermostat delivers ease and dependability without the need for difficult programming thanks to its user-friendly interface and simple operation. A digital display on the OCTK601AC makes it simple to see and change the temperature settings. Using the up and down buttons on the thermostat, you may set the temperature you want, and the system will hold that setting until you manually adjust it. The majority of common heating and cooling systems, including single-stage and multi-stage systems, are compatible with this thermostat. It uses a 24-volt AC power supply, which guarantees a steady and dependable power source. Additionally, the OCSTAT OCTK601AC has a fan control function that enables manual fan control by choosing the preferred fan mode (auto/on) on the thermostat. This gives you more control over how your interior air circulation is managed. Although the OCTK601AC does not support smart home connectivity or extensive programming options, it is still a great option for individuals who want a plain and uncomplicated thermostat solution. It depends on a direct power connection, therefore a battery backup is not necessary. Your intended temperature will stay consistent thanks to its temperature lock function, which prevents unauthorized modifications to the temperature settings. The display on the thermostat also incorporates a backlight, making it simple to read even in dim lighting. The OCSTAT OCTK601AC is normally easy to install, but if you have any questions about how to do it or how to deal with high-voltage electrical connections, you should see an expert. The OCSTAT OCTK601AC Non-programmable Thermostat provides excellent temperature management for your heating and cooling systems without the need for complicated programming features. It is simple, dependable, and easy to operate.

Features

• Non-programmable
• Easy-to-operate push buttons
• Blue / White backlight
• Heat / Cool mode
• Remote control function optional

Specifications

• Model No.: OCTK601AC
• Switchable Current: 6 A (2 A inductive load)
• Programmability: Non Programmable
• Temperature Range (°C): 0°C-40°C in 1°C
• Control Temp.Range (°C): 5°C-35°C in 0.5°C
• Temp.Meas.Accuracy: ±1°C (at 20°C)
• Power Source:  230VAC 50Hz

HOW TO USE

Follow these instructions to operate the OCSTAT OCTK601AC Non-programmable Thermostat:

• Get acquainted with the thermostat: Locate the thermostat’s buttons, display, and settings by taking a look at it.
• Turn on the thermostat to make sure it is getting electricity by making sure it is securely connected to the power source. Set the required temperature by adjusting the thermostat up and down buttons to the desired setting.
• The temperature both now and when it was set will be shown on the screen. Choosing the fan mode: Select the fan setting that best matches your needs.
• You may pick “Auto” to have the fan run just when the heating or cooling system is turned on, or “On” to have the fan run constantly.
• Lock the temperature settings (optional): You may use the lock function on the thermostat to prevent anyone from altering the temperature settings.
• For instructions on how to activate and disable the lock function, refer to the thermostat’s user handbook. Keep an eye on the weather: The room’s current temperature will be shown on the thermostat.
• Make sure the temperature setting is what you want. Adapt the temperature as needed: To modify the temperature, press the up and down buttons in the appropriate amounts to raise or lower it.
• To achieve the new temperature setting, the thermostat will modify the heating or cooling system. Manually control the fan: If the “On” fan mode is chosen, the fan will operate nonstop.
• Simply choose the “Auto” setting if you want the fan to be turned off. Be aware of the power source: The OCSTAT OCTK601AC typically draws power from a direct electrical connection rather than batteries.
• To ensure that the thermostat functions properly, make sure the power supply is kept up. Consult the instruction manual:
• Consult the user manual that came with the OCSTAT OCTK601AC thermostat for further instructions or other features. It will provide thorough explanations of the features and troubleshooting advice for the thermostat.
• The OCSTAT OCTK601AC is a non-programmable thermostat, so keep in mind that it lacks sophisticated scheduling features and automated temperature changes.
• The temperature settings must be adjusted manually to suit your preferences.

FAQS

What is the non-programmable thermostat OCTK601AC?

The non-programmable OCTK601AC thermostat is used to regulate heating and cooling systems in homes and businesses.

What are the OCTK601AC thermostat’s major characteristics?

Digital display, temperature control, fan control, and an intuitive interface are among the OCTK601AC’s key features.

How does the OCTK601AC’s temperature control function?

Using the up and down buttons on the thermostat, the OCTK601AC enables you to set and modify the desired temperature.

All heating and cooling systems are compatible with the OCTK601AC, right?

The majority of common heating and cooling systems, including single-stage and multi-stage systems, are compatible with the OCTK601AC.

Does the OCTK601AC have a display backlight?

The OCTK601AC does include a backlight, which makes it simple to read the display in dim lighting.

Can I use the OCTK601AC to manually regulate the fan?

Yes, you may manually operate the fan with the OCTK601AC by choosing the appropriate fan mode (auto/on) on the thermostat.

Has the OCTK601AC has a backup battery?

No, a battery backup is not a feature of the OCTK601AC. It is dependent on a direct power supply.

Are smart home systems compatible with the OCTK601AC?

The OCTK601AC is not a programmable thermostat and cannot be integrated into a smart home.

Can I lock the OCTK601AC’s temperature settings?

Yes, you can prohibit unauthorized changes to the temperature settings using the OCTK601AC’s temperature lock function.

Is there a filter change reminder on the OCTK601AC?

The OCTK601AC does not come with a built-in reminder to replace the filters. You’ll have to manually keep track of filter modifications.

Can I change the OCTK601AC’s pre-programmed settings?

The OCTK601AC is a non-programmable thermostat, hence there are no presets that can be changed.

OCTK601AC: Does it feature a vacation mode?

No, there isn’t a vacation mode on the OCTK601AC. It functions according to the appropriate temperature that you manually specify.

What voltage is necessary for the OCTK601AC?

Using a typical 24-volt AC power source, the OCTK601AC runs.

Is there a temperature swing setting on the OCTK601AC?

The OCTK601AC does not feature a differential or temperature swing set. Until manually altered, it keeps the predetermined temperature.

Is installing the OCTK601AC simple?

Depending on your heating and cooling system, the OCTK601AC installation procedure might vary, although it is often thought to be simple. If you have any questions concerning the installation procedure or working with high-voltage electrical connections, it is advised that you see a specialist.

OCSTAT OCTK601AC Non-programmable Thermostat User Manual