Moes WHT-3000-GA-SS-MS WiFi Smart Thermostat User Guide

Moes WHT-3000-GA-SS-MS WiFi Smart Thermostat

INTRODUCTION

Welcome
Thank you for your purchase. Your new thermostat will provide uniform and comfortable temperature control throughout every room in your property. We bring together technology, craftsmanship, and the highest quality materials to provide you with a Safe, reliable product combined with sleek, contemporary design. Please read this installation/programming manual for comprehensive instructions on installing and operating your thermostat. Please also ensure a suitably qualified person installs your thermostat and complies with all local regulations.

In the box

Thermostat	1pc	Screws	2pc
User Guide	1pc	Floor Sensor (2.5m)	1pc
QC Passed	1pc	(Floor sensor is Optional

ABOUT YOUR THERMOSTATS

The BHT-3000 range has been developed to control electric underfloor, water heating or water/gas boiler systems. These units are designed for use in commercial, industrial, civil and domestic properties

MODEL DEFINITION

• GA: Water heating, 5A
• GB: Electric floor Heating, 16A
• GC: Water/Gas Boiler, 5A
• L: Backlight
• P: Weekly Programmable
• N: Modbus Communication
• B: BACnet Communication
• W: Wifi
• S2: Both internal sensor and floor external sensor
• For example: BHT-3000 GCLP

FEATURES

On Appearance

1. A negative black screen and a colorful icon will bring you a secret world.
2. 65.9* 48.6 mm display area helps to protect your eyes.
3. Glass or Acrylic Lens is for your selection.
4. Touch buttons to make simple operation.
5. Amazing Silver Frame opens your modern life.
6. The visiable thickenss above the wall is only 13 mm.
7. Interlock to connect gives you easy installation.
8. 86mm hidden box and european 60mm round box is suitable.
9. White, black or gold housing creates your colorful life.

On Functionality

1. Powerful functions are available such as Modbus/WIFI etc,
2. 0.5°C Accuracy keeps the temperature within the level you set.
3. Data memory when power is off.
4. 5+2 six periods programmable maximize comfort and economy.
5. Creat a thermostat group to Centralized control
6. Integrated with Amazon Echo , Google Home, Tmall Genie,|FTTT.
7. All setting languages synchronize your time zone, address, and language.
8. No limit to add rooms and support Smart Scene.

DIMENSION

TECHNICAL DATA

• Power Supply: 95 ~240 VAC, 50 ~60HZ
• Current Load: 5A (water heating/water boiler/gas boiler) 16A (electric heating)
• Sensor: NTC3950, 10K
• Accuracy: 40.5 C
• Set Temp. Range: 5 -35C
• Dispaly Temp. Range: 5 ~99 C
• Ambient Temp.: 0 ~45 C
• Ambient Humidity: 5 ~95 % RH (Non Condensing)
• Storage Temp.: -5 ~45 C
• Power Consumption: <1.5W
• Timing Error: <1%
• Shell Material: PC +ABS ( Fireproof)
• Installation Box: 86 * 86mm Square or European 60mm Round Box
• Wire Terminals: Wire 2x 1.5 mm2 or 1x 2.5 mm2
• Protection Class: IP 20
• Buttons: Capactive Touch Buttons

BEFORE WIRING AND INSTALLING

1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.
2. Check the ratings given in the instructions and on the product to make sure the product is suitable for your application.
3. Installer must be a trained, experienced service technician.
4. After installation is complete, check out product operation as provided in these instructions.

CAUTION
Electrical Shock or Equipment Damage Hazard. Can shock individuals or short equipment circuitry. Disconnect power supply before installation.

WIRING

Note:

• GA is for water heating;
• GB is for electric heating;
• GC is for water/gas boiler;
• NTC and Modbus is optional.

INSTALLATION

• Your thermostat is suitable for installation within a standard 86mm pattress box or European 60mm pattress box.
• Step 1. Keep power off. See Fig 1.
• Step 2. Remove the mounting Plate by rotating the LCD part. See Fig 2.

• Step 3. Connect power supply, load into the appropriate terminals. (see “Wiring your thermostat” for details and Fig 3).
• Step 4. Fix the mounting plate into the wall with screws in the box. See Fig 4.

• Step 5. Fasten body of thermostat and the mounting plate through rotating. See Fig 5.
• Step 6. Installation complete. See Fig 6.

HOME SCREEN QUICK REFERENCE

OPERATION

During Power On

• Power On/off: Press to turn the thermostat on/off.
• Manual & Programmable
• Touch M (mode) to change between manual mode and program. mode. In manual mode, will show in the bottom left of the screen In programmable mode, the period icon will show in the right side.
• Setting Temperature
• In the mode of programmable, set temperature, time could not be adjusted. If the user wants to change, please go to manual mode or programmable mode.
• In the mode of manual, press to set the desired temperature.
• Adjusting/Setting the Clock
• Touch the icon to set minute, hour and weekday (1 =Monday,
• 2 =Tuesday etc.) by usingthe arrows. Press   once more to confirm and exit.
• Locking your Thermostat
• Press and hold the  for 5 seconds to lock/unlock your thermostat
• In item 3 of high senior options, you can select full lock or half-lock.
• Adjusting/setting the Program Schedules
• When Wi-Fi connection is made, your thermostat will automatically accept the program schedule made via the APP on your device (See below for detailed instructions) To set the program schedules through your thermostat (NOT via your smartphone/tablet) simply follow the instructions as below:
• Please note: Setting the program schedule through your thermostat can only be carried out if there is no Wi-Fi connection between your thermostat and smartphone; tablet.
• Touch M to change between manual mode and program mode. In manual mode,  will show in the bottom left of the screen. In program mode, touch and hold the icon until the weekday schedule settings appear (1 2 3 45 will show along the top of the screen).
• Use the  and arrows to adjust the on time.
• Press the icon  andusethe  and arrows to set the off time (2nd period).
• Press the icon  andusethe  and arrows to set the temp.
• Repeat this process for periods 3 4and 5 6.
• Press the icon  once more to enter the Saturday schedule settings (6 will show along the top of the screen).
• Repeat the above process to set the period and temp. and Sunday schedule.
• Press once more to confirm and exit.

Default settings for program schedule

Time display	WEEKDAY (MONDAY— FRIDAY) (12 3 4 5 shows on screen)		WEEKEND (SATURDAY) (6 shows on screen)		WEEKEND (SUNDAY) (7 shows on screen)
	TIME	TEMPERATURE	TIME	TEMPERATURE	TIME	TEMPERATURE
Period 1	6:00	20 C	6:00	20°C	6:00	20°C
Period 2	8:00	15 C	8:00	20 C	8:00	20°C
Period 3	11:30	15 C	11:30	20 C	11:30	20°C
Period 4	13:30	15^C	13:30	20 C	13:30	20°C
Period 5(1+2)	17:00	22 C	17:00	20 C	17:00	20°C
Period 6(3+4)	22:00	15 C	22:00	15 C	22:00	15 C

Checking the Temperature of Floor Sensor

• Press and hold the  arrow for 5 seconds to display the temp. of floor sensor.
• Return To Factory Default
  
• Press the Reatore Mianufacturer Defaults, you can reset thermostat.
• Steps: Open your app -go into your room – click menu on the top right corner – move to the end – Press Restore Manufacturer Defaults.
• During Power Off
• Setting the Functions and Options
  
• When power is off, press and hold M and at the same time for 5  sec. in order to reach system function. Then press M to scroll through the available functions, and use the and arrows to change the available options. All settings are confirmed automatically..

Code	Function	Setting and options	Default
1	Temperature compensation	-7 to + 9 ( (for internal sensor)	-1
2	Deadzone Temperature	1 ~ 5 C	1
3	Button locking	00: All buttons are locked except power button. 01: All buttons are locked.	01
4	Sensor types	In: Internal Sensor ( to control or limit the temp.) Ex: External Sensor ( to control or limit the temp.) Ou: Only external sensor AL Internal/ External Sensor ( Internal sensor to control the temp., external sensor to limit the temp.)	AL
5	Min. Set Temp.	5-15 C	05
6	Max. Set Temp.	15-45 C	35
7	Display Mode	00: Display both set temp. and room temp. 01: Display set temp. only	00
8	Low-temperature protection setting.	0-10 C	00
9	High-temperature protection setting.	25-70 C	45
A	Economy Mode	00: Non-energy saving Mode 01: Energy saving mode	0
B	Economy Temp.	0-30 C	20
C	Standby Brightness	3-99	04

WI-FI CONNECTION

Before using your Wi-Fi thermostat for the first time,you must configure the Wi-Fi signal and settings through your smartphone or tablet This will allow communication between your connected devices

Step 1 Download your APP 

Step 2 Register your account

Open “Smart Life”, you will get a piece of notification
Click Allow to go into your page of the register. Press register and enter your phone no. or email then you can get a verification code. Input your password and confirm to complete your registration.If you have an account, please log in.

Step 3 Connect your Wi-Fi signal

On your thermostat

• With power off, press and hold the arrow for eight (8) seconds.
• The backlight will be on and the icon will flash one time per sec..

Then, go back to the home page of your app
Press the + on the upper right corner of the page to add your device. Click Confirm indicator rapidly blink then select your network and back to your app to enter the password of your wireless router and confirm. The app will connect automatically this may typically take up to 5~90 seconds to complete. Your room name could be edited when the device is connected

On your thermostat
With power off, press and hold the  arrow for eight (8) seconds. The backlight will be on and the icon   will flash one time per sec. Press and hold the   arrow for eight (8) seconds again. The icon  will flash one time every (3) seconds.

Then, go back to the home page of your app
Click Confirm indicator slowly blink then select your network and back to your app to enter the password of your wireless router and confirm.

• Press Connect now to select the wifi signal Smartlife-XXXX of your thermostat
• Go back to your app and click Connect now then the app will connect automatically
• This may typically take up to 5~90 seconds to complete.
• Your room name could be edited when the device is connected

PROGRAMMING YOUR THERMOSTAT

When your room is established successfully, it will display on the home screen. The round button is to turn on/off your room. Click the line into beginning programming your thermostat.

• Power on/off button, press it, turn on the device, press it again, turn off the device
• Lock/Unlock button. If button is green, the screen is “Locked”, If button is grey, the screen is “Unlocked”.
• Econony button, in this mode, the temperature will be keep 20 degree. This temperature cannot be changed or adjusted.
• Manual button: In this mode, your heating can be set manually (ie. Not using the pre-programmed settings)
• Program button. When this button shows, your thermostat is in program mode and will follow any pre-set heating schedule. When in Manual mode, press the  button to select mode  and vice-versa.
• Slide the yellow button backward or forwards to manually adjust the temperature, the temperature will show in the center of the page. After a few seconds the current room temperature will show.
• hen in Program mode, click on the schedule setting (at the bottom of the page) to be taken to the schedule page where you can simply click On the working days (Mon-Fri) and then the time/Temp. to adjust to your preferred schedule.
• You can set 6 periods – time and temp.
• Repeat the above after clicking on the Weekend (Sat-Sun) settings at the top of the page
• Once your schedule has been set, click on SAVE and the app will send the programming to your thermostat and confirm the schedule has been saved.

How to create a group?
Press the menu button in the red circle then click Create Group, Select all the rooms you want, and confirm.

Note
Except create the group, in this menu page, you can also modify your device name, share your device, and get information about your device.

How to share your device with your family member?

• Way 1: Mentioned in the above.
• Way 2: Click your Profile at the right botton of your main page (Fig 6-2).
• Select Device Sharing then add the account you want to share.
• You can see the sharing account you have sent and the device you have shared in this sharing page.
• You don’t need to do anything if you are the one shared.
• You can add as many as rooms you want.

How to connect your device to Amazon Echo or Google Home?
In your profile, click Integration into the using page. Press Use Now > for your Amazon Echo or Google Home or Tmall Genie or IFTTT then you can see the operation steps.

What is your Smart Scene and How to use it?

• Customize your own personal scenes to suit your needs. For example, set your home to automatically turn on the thermostat on when you back home (Fig 7-2).Press + button into the setting
• Step 1: You can set a condition for Task like a Temperature below 20 degree, then click Save. (Condition: Temp., Humidity, Wether, PM2.5, Air Quality, Sunrise/Sunset, Device)
• Step 2: Add atask. Press + to Select Device (Power, Set Temp, Lock Mode) to act, then Save. If you want to delete the scene, you can press Delete in the end.

NOTE: The room sound could be turned on/off in PROFILE-SETTING-SOUND. The sound is matched with the default of your system.

SIMPLE EXCEPTION HANDLING

No.	Phenomenons	Handling
1	Power is on but without display.	* Check if the termi nails between LCD panel and Power Unit Box is loosen.
2	Without output but display works.	* Use a new LCD panel or new Power Unit Box to replace the old one.
3	Room Temp. Is a li le differenr om the actual.	* Do temperature Calibra on in item 1 o high senior op ons

SERVICE

Your thermostat carries an 24 months warranty from date of purchase. Service outwith the warranty period may incur a charge. For more detail please contact with us directly.

REFERENCE

DOWNLOAD MANUAL

Moes BHT-3000 Series Thermostat User Guide

Moes WHT-3000-GA-SS-MS WiFi Smart Thermostat