miMonitor MI-TH01W-W SMART WI-FI THERMOSTAT
TECH-SPECS
- Color: White/ Silver
- Screen: LCD
- Language: English
- Input: 220VAC±10%50/60HZ
- Sensor: NTC 10K B:3950
- Temp Range: 5-35 t
- Accuracy: ± 1 t
- Size: 86″86*13 mm
- Output:5A*220VAC(Water)
- Power Cons: :s;1 .7 KWh/month
- APP: Android / iOS
SCREEN & BUTTON FUNCTIONS
- current temp
- target temp
- they are heating stake: lock : connect to the host: wifi stat
- Press” M ” : SWitch mode
- Press” M “3s: Power on or off
- Press” ” “: Increase the temp
- Press” ” ” : Decrease the temp
- Press” ” “3s: Enter the pairing WiFi mode
- ‘M “”‘ “: Press ”M • &’., ” for 3s to lock or unlock
CONNECT TO THE INTERNET
- Press for 3s, will flash quickly
- App enters the add device page, select the type of product.
- Input the SSID and password, then pairing
Wiring Diagram(water)
- 1/2: Connect to external sensor
- 3/4: Volt Free Relay
- 5: Normally closed
- 6: Normally open (Switched Live)
- 7: Live terminal
- 8: Neutral terminal
INSTALLATION INSTRUCTION
- Back Box
- Install into UK Single Gang Back Box (Min depth 35mm)
- Power off
- Ensure the power is turned off before installation
Install Steps
- Connect wiring terminals
- Fix mounting plate to back box
- Carefully push on the front panel
OTHER OPERATION
- External & Internal Temp Check:
- Long press the ” M “and ” “to switch the internal temp or the external temp.
- Temp Protection Warning:
- When the temp is higher or lower the protection value, ” O” will flash, the valve will auto close or open, and adjust the temp to 2 oc lower or 20 higher of the protection value, ” Ö ” will stop flash and the protection mode cancel.
- ERR Exception:
- When the ” ERR” light up, it means the sensor mode was wrong or the sensor was broken. And the temp value in the screen will show
- Valve Anti Lock Function
ADVANCED SETTINGS
- When the thermostat is powered on, long press the ” ” and ” v” (5s), press” M “select the setting items, and press” “or ” v ” to select
- Sensor type Default is 00:1nternaI 01 •.External 02:1nternaI&ExternaI.
- High temp protection: 35-950, Default is 950, “–“CanceI the protection
- Low temp protection is 50C,”–“cancel the protection
- Swing: 1-9 C, Default 2 oc
- Temperature calibration ADJ: -90C-+90C, Default is OOC
- Highest target temp: 35—900, Default is 350
- Lowest target temp: 0-30 C, Default is 50C
- Home mode target temp: Default is 220
- Away mode target temp: Default is 150C
- AUTO mode target temp: Default is 200C
- System restart: Press ” ” or “
- Factory setting:
- Press” A” or ” v ” to switch the ” ” to and wait for 5s v ” to switch the ” to and wait for 5s
EASY AND FAST INSTALLATION
Everything you need is in the box and follow along our step-by -step guide to complete the Self-Installation.
MULTIPLE OPERATING MODES SMART CONTROL
You can control your products in group, or smart scenes via the App, It’s easy to use. Get your location and automation control the device base on the local environment.
Make Your Thermostat More Smart
You can control the thermostat anywhere via the App, you
Reference
Download Manual:
miMonitor MI-TH01W-W SMART WI-FI THERMOSTAT Installation Guide
miMonitor MI-TH01W-W SMART WI-FI THERMOSTAT Installation Guide