MXC digital clockthermostat
Please read this manual carefully before installation, and store it with other warranty forms. This manual describes the most essential functions. A more detailed manual is available on our website.
Installation needs to be done by a qualified electrician in accordance with all current wiring and building regulations. Before installation or re-installation of the thermostat always isolate the power to the thermostat.
Check if the power is off. Remove the display frame by pushing a non sharp instrument (for example the point of a ballpoint pen) carefully in the square whole underneath the thermostat. The display frame and the cover frame can be removed.
EARTHING: We advice to make an external earth wire connection from the thermostat with the supplied terminal block. Position the thermostat and install onto the back box (not supplied). Place the display frame back into position by pushing it softly. After connecting power for the first time the first question appears on the screen:
After the final confirmation, the main screen appears. The standard settings are operational and will be executed automatically .
The thermostat is controlled by three touch-sensitive keys
on the underside of the screen. The basic functions of these
keys are:
^ Up, o Confirm, v Down.
An icon shown above the button will adopt that function.
Quick return: Press “up” for 2 seconds for quick return to the
main screen.
Standard Automatic program
This includes the following heating periods with a comfort temperature of 23°C:
Monday to Sunday
Outside these hours, the thermostat switches automatically into power save mode.
Costum Automatic program:
Copy and paste a daily program:
Repeat steps 5 to 8 to paste the same daily program in any other day. (The last copied daily program can be pasted repeatedly).
Sensor error: Sensor has a defect or may be wired incorrectly or loosely. Heating system will not work when there is a sensor fault. Advice: Check the wiring of the floor sensor and tighten terminals. If the connection is sound and the sensor error is still shown we advice you to contact your supplier.
Here you can pause the current program of the thermostat by (temporarily) switching to another program. When a mode function is selected a corresponding symbol is shown. Option “Automatic“ will activate the standard (2.1) or custom program (2.2).
The thermostat will switch on according to the programmed settings. This can be the standard settings (2.1) or the custom time settings (2.2).
To temporary override the temperature in the automatic program. The override will operate until the next automatic event.
To permanently override the automatic program.
Switches off the thermostat and heating system.
In the case that the floor temperature falls below 7 degrees Celsius, the system starts heating and keeps the temperature above 7 degrees.
Use this mode when you are on holidays etc. The thermostat will be off for the chosen period.
The thermostat will slowly raise the temperature of the floor over a 20 day period. After this period the thermostat automatically starts the standard or the custom time program.
Change the thermostat settings.
With this function you can change the programmed temperature (comfort or set back temperature).
The comfort temperature and times can be changed in this menu. (See 2.2).
The total switched on time is by percentage (%) shown over the last 30 and 365 days.
To switch the child lock function on or off, push and hold it for a few seconds. When the child lock is switched on, a padlock appears on the display.
Gives information about the current software and hardware version of the thermostat.
Change the following settings:
Advanced functions
Attention: Adjustments can have a big influence on the working of the thermostat! Please consult your supplier.
Download Manual:
klima IP21 TOUCH SCREEN THERMOSTAT Instruction Manual
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…