JUANJUAN 220v Temperature Controller Digital Thermostat User Manual

JUANJUAN 220v Temperature Controller Digital Thermostat

INTRODUCTION

A gadget created to manage and control the temperature in a variety of applications is the JUANJUAN 220v Temperature Controller Digital Thermostat. To maintain a desired temperature range, it is often employed in heating, cooling, and temperature control systems. With its digital interface, this thermostat provides accurate temperature control and runs on a 220-volt power source. Users may establish different control settings and select particular temperature parameters to suit their needs. The LCD display of the JUANJUAN 220v Temperature Controller Digital Thermostat is crystal-clear and simple to read, and it provides pertinent system information as well as real-time temperature data. Additionally, it offers simple controls for modifying temperature settings and creating routines. The thermostat can precisely monitor the outside temperature thanks to its in built temperature sensor capabilities, and it can then turn on or off any connected heating or cooling units in accordance. This guarantees dependable and effective temperature regulation. Additional features such as programmable schedules, temperature calibration, temperature hysteresis settings, and alarm features could be available with the JUANJUAN 220v Temperature Controller Digital Thermostat. With the use of these functions, users may modify the thermostat’s settings to suit their own requirements and tastes. The right cables from the power supply and the heating or cooling equipment need to be connected before the thermostat can be installed. To guarantee correct installation and secure functioning, it’s crucial to adhere to the manufacturer’s instructions and get expert assistance as necessary. The JUANJUAN 220v Temperature Controller Digital Thermostat offers accurate temperature control, versatility, and simplicity of use, making it appropriate for a variety of applications where exact temperature management is needed.

Function

1. A temperature may be determined using an external temperature detector.
2. Decide on the start and end temperatures.
3. Timer switch, cycle timing, and start and stop times.
4. It is extensively utilized for intelligent control in a variety of settings, including greenhouses, aquaculture, carbon heating, and domestic settings.
5. The purpose of screen lock protection.
6. Press RESET to return the screen to its default settings and restore it for one second.
7. Memory operation during power loss.

Function for temperature correction:

• Long press the mode button on the power source, and after two seconds, the real-time temperature calibration
• Range of real-time temperature correction: -9.9 to 9.9°C
• To automatically depart, long-press the SET for 5 seconds; do not save changes.
• In order to preserve the current correction change, long press the MODE button to quit.

Technical specifications

• Voltage: 50/60 Hz, 110–230 volts, AC
• 16(2)A 230V-Max, 3680W, EU FR Plug
• 13(2)A 230V-Max. 2900W UK Plug
• 15(2)A, 120V, max. 1800 watts, US Plug
• Range of temperatures: -40 to 120 °C
• Precision: +/- 1%
• Time accuracy: 10 minutes maximum
• The first row of the panel flashes “E1,” “-40°-45°C,” and “open circuit” (or less than -40°C).
• The first row of the LCD flashes “E2” with a temperature range of 121-129°C when there is a short circuit (or more than 120°C).
• It will not show a value after the decimal point for temperatures lower than -10°C or greater than 100°C.
• Start temperature, refrigeration mode > Stop temperature
• Start temperature and end temperature for the heating mode

On/Off switch:

• Click MODE. Temperature control mode on the LCD panel
• F01-F04 timing mode
• Start time(ON)/stop time(OFF) cycle timing is available in the F01 mode.
• F02 Count down mode is currently in ON, Ti is OFF, and Delayed (Start Time) is ON.
• F03 Complete countdown, now that it is ON, delayed(stop time) OFF, switch off output, and end run F04 ON the countdown
• Countdown mode is now off, the delayed start time is on, and the delayed stop time is off.
• Stop the timer from running out, shut off the output, and end the procedure.

DIMENSION

USAGE

A device for controlling the temperature in a variety of applications is the JUANJUAN 220v Temperature Controller Digital Thermostat. Here are some typical applications and uses for the thermostat:

• The thermostat may be used to regulate the temperature in heating systems, including boiler systems, radiant heating systems, and electric heaters.
• Systems for cooling: It may be used to control the temperature in air conditioners, refrigerators, or cooling fans.
• Greenhouses: To maintain the ideal temperature for plant development, the thermostat may be used in greenhouses.
• Aquariums: They may be used to regulate the temperature to produce a comfortable environment for aquatic life in fish tanks or aquariums.
• Incubators: The thermostat may control the temperature in incubators used for scientific research or to hatch eggs in laboratories.
• For home brewing or winemaking, it may be used in fermentation chambers to regulate the temperature during the fermentation process.
• Heat mats or heat cables: To offer regulated warmth for reptile habitats, seed germination, or pet habitats, the thermostat may be connected with heat mats or heat cables. In order to maintain exact temperatures for baking, firing pottery, or other heat-
• treating procedures, it may be utilized in electric ovens or kilns.
• Electric water heaters’ temperature may be regulated by the thermostat to guarantee that hot water is kept at the desired degree.
• It may be employed in a variety of industrial operations that call for precise temperature control, such food preparation, plastic manufacturing, or chemical reactions. Environmental chambers and temperature-controlled spaces may both be used for study, testing, and storage thanks to the thermostat.
• Solar water heating systems: By managing the flow of heat transfer fluids, the temperature in these systems may be adjusted.
• In order to maintain the proper temperature in brooders, hatcheries, or animal housing, the thermostat may be used in poultry or cattle husbandry.
• It may regulate the temperature of heat tracing systems that are used to keep pipes, tanks, or valves from freezing or to maintain a certain temperature.
• The thermostat may be used in a variety of do-it-yourself projects that call for temperature control, including homemade sous vide cookers, temperature-controlled soldering stations, and hobbyist incubators.
• The JUANJUAN 220v Temperature Controller Digital Thermostat’s model and specifications can affect specific usage instructions and compatibility, so it’s always a good idea to refer to the user manual that came with the device for accurate instructions and safety precautions.

FAQS

What is the JUANJUAN Digital Thermostat with 220V Temperature Controller?

An electronic gadget created to manage and regulate the temperature in many applications is the JUANJUAN 220v Temperature Controller Digital Thermostat. It offers accurate temperature control and runs on a 220-volt power source.

What is the operation of the JUANJUAN 220v Temperature Controller?

A built-in sensor on the thermostat measures the temperature and compares it to the user-specified target temperature. The necessary heating or cooling equipment is subsequently turned on to maintain the specified temperature.

What are the JUANJUAN 220v Temperature Controller’s major characteristics?

The JUANJUAN 220v Temperature Controller Digital Thermostat has a number of key functions, including 

• Readings of temperature on a digital display
• setting a temperature that is flexible
• Control modes are On/Off.
• temperature warning
• starting and stopping with a delay
• Options for a temperature scale in Celsius or Fahrenheit are
• simple to set up and use.

What is the JUANJUAN 220v Temperature Controller’s temperature range?

Depending on the model, the precise temperature range may change, but generally speaking, the JUANJUAN 220v Temperature Controller can manage temperatures between -50°C and 99°C (-58°F and 210°F).

Can applications for both heating and cooling be utilized with the JUANJUAN 220v Temperature Controller?

Yes, you may use the JUANJUAN 220v Temperature Controller for both cooling and heating purposes. Both cooling and heating appliances, such as fans and air conditioners, may be controlled by it.

Can you program the JUANJUAN 220v Temperature Controller?

No, the programmable functions on the JUANJUAN 220v Temperature Controller Digital Thermostat are not usually available. It runs in a straightforward On/Off control mode and works depending on the user’s temperature setpoint.

Is the JUANJUAN 220v Temperature Controller suitable for use in a commercial setting?

Yes, the JUANJUAN 220v Temperature Controller may be utilized in a variety of industrial settings that need exact temperature control, including fermentation processes, aquariums, greenhouse operations, and climate-controlled spaces.

Is there a timer built into the JUANJUAN 220v Temperature Controller?

Yes, certain JUANJUAN 220v Temperature Controller models come with a built-in timer feature. This enables automated start and stop operations and lets users select a specified time period for temperature control.

How much electricity does the JUANJUAN 220v Temperature Controller require?

The JUANJUAN 220v Temperature Controller uses a 220-volt power source, as the name would imply. To avoid damage, it’s essential to confirm that the power source fits the voltage requirements of the appliance.

Can other kinds of sensors be used with the JUANJUAN 220v Temperature Controller?

Yes, a variety of sensors, including thermocouples or temperature probes, may normally be used with the JUANJUAN 220v Temperature Controller. This enables adaptability to various requirements for temperature measuring.

Can I use the JUANJUAN 220v Temperature Controller outside

Depending on the exact model and its IP (Ingress Protection) rating, it may or may not be suitable for outdoor usage. Although certain models could be made to endure external elements, it’s crucial to verify the product specs and user manual for instructions.

Are there any safety measures on the JUANJUAN 220v Temperature Controller?

The JUANJUAN 220v Temperature Controller does, in fact, often come with security features such a high-temperature alert. This function warns the user when the temperature rises over a certain level, assisting in avoiding overheating or other possible risks.

Is it possible to calibrate the JUANJUAN 220v Temperature Controller?

Depending on the model, the JUANJUAN 220v Temperature Controller may or may not be able to be calibrated.

While some thermostats may not have this capability, others do provide calibration alternatives to guarantee correct temperature readings.

Can I use the JUANJUAN 220v Temperature Controller at home?

Yes, home applications are compatible with the JUANJUAN 220v Temperature Controller. It may be used to regulate the temperature in water heaters, home heating systems, and other appliances that are used in the home.

How should the JUANJUAN 220v Temperature Controller be installed and configured?

It is crucial to refer to the user manual supplied by the manufacturer since the installation and configuration procedure may vary depending on the modern general, the thermostat must be properly plugged into the electrical circuit and the desired temperature setpoint must be modified to meet the demands of the user.

JUANJUAN 220v Temperature Controller Digital Thermostat User Manual