Johnson Controls

JOHNSON Control T9600 Touch Screen Thermostats User Manual

JOHNSON Control T9600 Touch Screen Thermostats

Futuristic and Hi-tech Exterior Design

With a frameless large touch screen, the T9000 Series Thermostats can display ambient temperature clearly and intuitively. The buttons are sensitive and very user-friendly. The futuristic and hi-tech exterior design is loved by users from high-end office buildings, hotels, private hospitals, and high-end residential buildings

Superb materials for a stable performance
The service life of the relay is designed to be turned on / off for 100,000 times. The eco-friendly shell materials meet the CE standard for flame retardants. High-quality materials and components ensure that the thermostats are safe, eco-friendly and reliable. The PCB was produced with a high-standard gold depositing procedure, to ensure better electrical performance, more sensitive touch, and more durable. The thermostats have been certified by multiple industry standards, including CE, RCM, REACH, RoHS, BTL, WEEE and GB, to ensure stable performance.

Energy-efficient and eco-friendly
The T9000 Series Touch Screen Thermostats can be used to control ECM motors far better than industry standards, as they can reduce the motor’s energy consumption by 30-50% and the motor’s noise by 1-2 dB (A), to make the environment more comfortable. In addition to the delay on / off function, the T9000 Series Touch Screen Thermostats can also activate the occupancy (eco) mode with the signal from a door card, a PIR (Passive Infrared) sensor or other dry contacts, to switch the set point of temperature, and to keep fan motor on low speed or shut down, so as to improve efficiency and save energy.

Intelligent control and system optimization
The T9000 Series Touch Screen Thermostats support multiple operating modes, including cooling, heating, ventilating, and floor heating. They also provide other functions, including the occupancy mode and T9600 support remote temperature sensor. Some models adopt a 32-bit high-performance MCU to ensure more accurate control and more powerful functions. Some models support Modbus or BACnet protocols that can be seamlessly connected to the building automation system, to achieve the best room climate control.

Diverse application scenarios
Each of the T9000 Series Touch Screen Thermostats supports multiple application scenarios. They can control multiple types of equipment, including the 2-pipe fan coil unit (FCU) / 4-pipe FCU; the water source heat pumps; the simple air handling units (AHUs), boilers and floor heating systems; the 3-speed motors and ECM motors; the 2-wiring / 3-wiring on / off valves, modulating control valves and floor heating valves; as well as other air purification units (e.g. TiO2 / ESP).

List of the T9200 Series Touch Screen Thermostats

The T9200 Touch Screen Thermostats are standalone thermostats. They are designed to control cooling, heating, air conditioning and ventilating applications in commercial, industrial and residential projects. The thermostats are powerful, and can be used to control 2-pipe FCU / 4-pipe FCU, Single-speed / 3-speed motors / ECM motors, and on / off valves /regulating valves. Its TiO2 / ESP features can make the environment to cleaner. The occupancy mode supports comfortable and more energy-efficient temperature setting. The BI input supports dry contact signals from door cards, PIR (Passive Infrared) sensor, dew point sensors, filter’s differential pressure switch, etc. The products apply to multiple scenarios, for example, they can be used for FCU, single-speed AHUs, floor heating systems, water source heat pumps, and boilers.

 

 

T9200-TF20-1JS0

4-pipe FCU, On / Off valve 3-speed Fan 2 On / Off Valves
2-pipe FCU, 3-wire On / Off valve 3-speed Fan 1 3-wire On / Off Valve
2-pipe FCU with floor heating, On / Off valve 3-speed Fan 1 On / Off Valve 1 Floor Heating
2-pipe FCU with TiO2 / ESP, On / Off valve 3-speed Fan 1 On / Off Valve 1 TiO2 / ESP

Water source heat pump

3-speed Fan

1 Compressor

1 Revert Valve

Boiler/Floor Heating 1 Boiler / Floor Heating

 

 

 

 

T9200-TB21-1JS0

2-pipe FCU, ECM fan, On / Off valve ECM fan 1 On / Off Valve
4-pipe FCU, ECM fan, On / Off valve ECM fan 2 On / Off Valve
2-pipe FCU, ECM fan, 3-wire On / Off valve ECM fan 1 3-wire On / Off Valve
2-pipe FCU, ECM fan with TiO2 / ESP, On / Off valve

ECM fan

1 On / Off Valve

1 TiO2 / ESP

2-pipe FCU, ECM fan with floor heating, On / Off valve

ECM fan

1 On / Off Valve

1 Floor Heating

Water source heat pump

ECM fan

1 Compressor

1 Revert Valve

2-pipe FCU, Prop valve 3-speed Fan 1 Proportion Valve

List of the T9600 Series Touch Screen Thermostats

The T9600 Touch Screen Thermostats adopt the Modbus communication protocol. They are designed to control cooling, heating, air conditioning and ventilating applications in commercial, industrial and residential projects.The thermostats are powerful, and can be used to control 2-pipe FCU / 4-pipe FCU, Single-speed / 3-speed motors / ECM motors, and on / off valves / regulating valves. Its TiO2 / ESP features can make the environment to cleaner. The occupancy mode supports comfortable and more energy-efficient temperature setting. The BI input supports dry contact signals from door cards, PIR (Passive Infrared) sensor, dew point sensors, filter’s differential pressure switch, etc. They support connect to remote sensors, sensor type JCI 10K NTC Temperature Sensors like TE-636S-1. The products apply to multiple scenarios, for example, they can be used for FCU, single-speed AHUs, floor heating systems, water source heat pumps, and boilers.

 

 

 

 

T9601-TF20-1JS0

4-pipe FCU, On / Off valve ECM fan 2 On / Off Valves
2-pipe FCU, 3-wire On / Off valve ECM fan 1 3-wire On / Off Valve
2-pipe FCU with floor heating, On / Off valve ECM fan 1 On / Off Valve 1 Floor Heating
2-pipe FCU with TiO2 / ESP, On / Off valve ECM fan 1 On / Off Valve 1 TiO2 / ESP

Water source heat pump

ECM fan

1 Compressor

1 Revert Valve

2-pipe FCU, Prop valve ECM fan 1 Proportion Valve
2-pipe FCU, Prop valve with Floor Heating ECM fan 1 Proportion Valve 1 Floor Heating
2-pipe FCU, Prop valve with Radiator ECM fan 1 Proportion Valve 1 Radiator
AHU Single speed fan 1 Proportion Valve 1 Damper

T9600-TF21-1JS0

2-pipe FCU, Prop valve 3-speed Fan 1 Proportion Valve
4-pipe FCU, Prop valve 3-speed Fan 2 Proportion Valves

 

 

 

T9600-TF20-1JS0

2-pipe FCU, On / Off valve 3-speed Fan 1 On / Off Valve
4-pipe FCU, On / Off valve 3-speed Fan 2 On / Off Valves
2-pipe FCU, 3-wire On / Off valve 3-speed Fan 1 3-wire On / Off Valve
2-pipe FCU with floor heating, On / Off valve 3-speed Fan 1 On / Off Valve 1 Floor Heating
2-pipe FCU with TiO2 / ESP, On / Off valve 3-speed Fan 1 On / Off Valve 1 TiO2 / ESP

Water source heat pump

3-speed Fan

1 Compressor

1 Revert Valve

T9603-T000-1JF0 Floor heating 1 Floor Heating

Technical Specifications

Supply Voltage 100-240 VAC 50 / 60 Hz
Power consumption Max. 5VA
Terminations Screw terminal block
AO output(ECM Fan, Proportion Valve) 0-10VDC output, up to 20mA
Relay output (Fan, Valve, Tio2 and etc.) relay (SPST) output, 2.2A (IR), cosΦ 0.98; 3.6A (IX), cosΦ 0.98; 5A (Resistive)
Remote Sensor input T9600 models support remote sensor, 10K NTC JCI type II, e.g. TE-636S-1
BI input Dry contact signal

Wire size

Screw terminal block: 1.0-1.5mm² rigid conductor for 5mm connector; 0.14-1.5 mm² rigid conductor for 3.5mm connector
Mounting Flush-mounted
Temperature measurement range 0 to 49oC (32 to 99oF)
Temperature accuracy 1oC (2oF)
Default temperature set point range 5.0℃ to 35.0oC in 0.5oC increments

 

Ambient conditions

Operating: 0 to 40oC (32 to 104oF), 10 to 90% RH, noncondensing, 29oC (85oF) maximum dew point
Storage: -20 to 60oC (-4 to 140oF), 5 to 95% RH, noncondensing
Protection class IP20
Pollution degree 2
Heat and fire resistance category D
Temperature for ball pressure test 125oC
Limitation of operating time Continuous
Shipping weight Approx 300g

 

 

 

Compliance

CE mark
RCM mark, Australia / NZ emissions compliance
RoHS, REACH, WEEE
RoHS,REACH,WEEE

Note:

  • User can configure one model to different applications by parameter setting
  • IR is steady-state current of FCU motor, and Ix is transient current of FCU motor
  • Remote sensor need to be ordered separately

Interface and Icon Definition

Johnson Controls:
At Johnson Controls, we transform the environments where people live, work, learn and play. From optimizing building performance to improving safety and enhancing comfort, we drive the outcomes that matter most. We deliver our promise in industries such as healthcare, education, data centers and manufacturing. With a global team of 105,000 experts in more than 150 countries and over 130 years of innovation, we are the power behind our customers’ mission. Our leading portfolio of building technology and solutions includes some of the most trusted names in the industry, such as Tyco®, York®, Metasys ®, Ruskin®, Titus®, Frick®, Penn®, Sabroe®, Simplex®, Ansul® and Grinnell®.

Johnson Controls

AUSTRALIA

  • 5 Lindwall Place,
  • Rouse Hill,
  • NSW 2155, Australia

SINGAPORE

  • 31 International
  • Business Park Road,
  • #03-03, Lobby D & E,
  • Singapore 609921

Reference:

DOWNLOAD MANUALS:

JOHNSON Control T9600 Touch Screen Thermostats User Manual

JOHNSON Control T9600 Touch Screen Thermostats User Manual

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago