Honeywell  Home

HONEYWELL HOME T6R Smart Thermostat Installation Instruction

HONEYWELL HOME T6R Smart Thermostat

Installation Instruction

Turn OFF the power and remove the old thermostat

  • To ensure your safety, always make sure mains power is switched OFF before accessing wiring.
  • In case of removing the old thermostat be aware that the existing wiring will no longer be used
  • The T6R-HW thermostat should not be placed near draughts, in direct sunlight or near heat sources

Prepare Receiver Box for installation

Before installation of the Receiver Box
Find a suitable location near to the boiler. Leave at least 30cm distance from any metal objects including wallboxes and boiler housing

Needed during installation:
Cable with 2 wires from the boiler to Receiver Box. The Receiver Box requires 230V power

Install the Receiver Box

Wall box or Rear Wiring
Hinge open the terminal block flap to access the cables and wall box screw holes

Surface wiring
Use the cable clamps to secure the surface wiring

Replace the cover
Locate the hinges at the top of the cover and wall plate, close the cover and secure with the screw

Install the T6R-HW thermostat

Complete installation

Turn ON mains power to the Heating Appliance and Receiver Box.

Set Up and Configuration

Once setup is completed, if you need to change more settings go to the advanced menu. To access the advanced menu press for 5 seconds.

In the advanced menu the following settings can be adjusted:

Wiring Diagrams

Need help? For assistance please visit: homecomfort.resideo.com
Honeywell Home Control Systems Ltd., Skimped Hill Lane, Bracknell, Berkshire, RG12 1EB

Approvals
Conforms to protection requirements of the following directives: EMC: 2014/30/EU, LVD: 2014/35/EU and RED: 2014/53/EU. Hereby, Honeywell Home, declares that this thermostat is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: http://hwll.co/DoC

  • RF (868MHz): Receiver Category 2, Max RF Power 25mW, 868–868.6MHz (868.3MHz)
  • Wi-Fi (2.4GHz): Max Power 100mW, 2.4–2.458GHz
  • ErP: Class V (+3%), (EU) 811/2013

Honey Well

REFERENCE:

DOWNLOAD MANUALS:

HONEYWELL HOME T6R Smart Thermostat Installation Instruction

OTHER MANUALS:

HONEYWELL HOME T6R Smart Thermostat Product Data Sheet

HONEYWELL HOME T6R Smart Thermostat Installation Instruction

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago