Hive Active Heating is a clever way to control your heating and if you have a hot water tank, your hot water too. This guide tells you everything you need to know.
Hot tip: If you’ve bought Hive Active Heating for help controlling your heating and hot water remotely visit hivehome.com
How to change the temperature:
How to change mode:
Your thermostat has 3 different heating modes: Schedule, Manual, and O!
Setting up a heating schedule:
Your thermostat will walk you through setting up your heating schedule step by step.
To do this:
How to view your heating schedule:
Hot tip: To edit the schedule for that day just push the dial.
Hot water features are not shown on combi boilers (boilers without a separate hot water tank) as they automatically heat water when it’s needed.
How to turn your hot water on or off:
Hot tip: If you only want hot water at certain times of the day, using Schedule mode could be a more energetic event.
Setting up a new hot water schedule:
Your thermostat will walk you through setting up your hot water schedule step by step.
To do this:
How to view your hot water schedule:
How to boost your hot water for a short time:
Multizone lets you control up to six existing plumbed heating zones in your home. Each zone needs its own Hive thermostat and receiver.
If you are a Hive Multizone customer, change the zone name of each thermostat lo to the Hive app or online dashboard and select Mana e Devices.
If you need to identify which of your Hive thermostats belongs to which receiver follow these steps:
How to change the batteries:
If this message shows on your thermostat – it means your thermostat and the receiver aren’t communicating.
For more information visit hivehome.com/support or et in touch with the Hive team at help@hivehome.com
Hot tip: Even without a signal you can still manually switch your heating and hot water on and o by pressing the buttons on the Hive receiver (usually beside your boiler) when it’s Status li ht is red.
Can we help?
You can view our handy how-to-use videos along with hints and tips at hivehome.com/support
If for any reason you need to return your Hive Active Heating, simply return your box and its contents to the retailer. Any return is subject to the retailer’s refund policy so please don’t forget to check the retailer’s refund policy too.
Centrica Connected Home Limited declares that the radio equipment types SLT3, SLR1, and SLR2 comply with UK SI 2017 NO.1206 AND EU Directive 201 /53/EU.
Full declaration text available at: hivehome.com/compliance
Max. radiated power: < 0 dBm. Frequency: 240 – 24835 MHz.
To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with a crossed-out wheeled bin should not be placed into your household rubbish bin. Instead, when they are unable to be reused, they should be recycled. Your local authority will be able to advise you on the location of the nearest recycling center that is authorized to accept this type of waste. Please recycle responsibly.
© 2021 Centrica Connected Home Limited.
Registered in England (No.5782908) SL4 5GD, UK. Bord Gáis Energy. Registered in Ireland (No. 463078) DO2 HH27, Ireland. All rights reserved. IG70003650517V1
Download manual:
Hive 851816 Electric Thermostat User Guide
OTHER MANUALS:
Hive 851816 Electric Thermostat Installational Guide
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…