Heatmiser RF Switch v2 Wireless Receiver THERMOSTAT USER MANUAL

Heatmiser RF Switch v2 Wireless Receiver THERMOSTAT

RF-Switch V2 – LED/button indication

Installing the RF-Switch V2

• Using a small screwdriver, slightly loosen the screw located at the base of the RF-Switch. You can then carefully separate the front panel from the back plate.
• Position the RF-Switch back plate on the wall, fixing into place using the screws provided.
• Terminate the cables to the RF-Switch as shown in the wiring diagram (section 6).
• Mount the front panel onto the back plate, tighten the retaining screw on the base.
• Switch on the power supply, the power LED will illuminate.

Overriding the outputs

• To override an output on the RF-Switch V2, simply press the override button once, the output & LED will then be activated.
• To override the output of, press the button once.

Pairing the RF-Switch to the UH8-RF/UH8-RF V2

• On the RF-Switch, press and hold the CH1 pairing button for 5 seconds.
• The CH1 status LED will start to flash.
• Press and release the pairing button on the UH8-RF.
• When the RF-Switch detects the pairing signal from the UH8-RF, the CH1 LED will stop flashing.
• To pair your wireless thermostat to the RF-Switch, please refer to your wireless thermostat instruction manual.
• When pairing a thermostat in combined heating/hotwater mode, you do not need to pair to the HW channel. This is done automatically when the stat is paired to either CH1 or CH2

Channel Reset

• To reset an output of the RF-Switch;
• Press and hold the pairing/override button of the desired channel for 15 seconds.
• During the button press you will see the LED flash steadily followed by a rapid flash.
• Once the LED has stopped blinking, the reset procedure is complete and will erase all devices paired to that channel

RF-Switch Wiring Diagram (S Plan)

Heatmiser

Want More Information?
Call our support team on: +44 (0)1254 669090 Or view technical specifications directly on our website: www.heatmiser.com

• Heatmiser UK Ltd
• Units 1-5 Hurstwood Court, Mercer Way
• Shadsworth Business Park, Blackburn,
• Lancashire, BB1 2QU, United Kingdom
• Twitter: @heatmiseruk
• Facebook: facebook.com/thermostats

Reference

Download manual:

Heatmiser RF Switch v2 Wireless Receiver THERMOSTAT USER MANUAL

Other Manual:

Heatmiser RF Switch v2 Wireless Receiver THERMOSTAT PRODUCT SPECIFICATION GUIDE

Heatmiser RF Switch v2 Wireless Receiver THERMOSTAT USER MANUAL