Heatdecor TS05 THERMO-SWITCH SOCKET THERMOSTAT USER Manual

Heatdecor TS05 THERMO-SWITCH SOCKET THERMOSTAT

Utilization examples

THERMO-SWITCH SOCKET

TS05 is a thermo-switch socket with very easy control for the regulation of electric heating systems (infrared heating, direct heating bodies, towel dryers).

1. Insert the TS05 into the socket (230 V/ 50 Hz).
2. The actual room temperature will be displayed on TS05.
3. The required temperature is factory preset at 18 °C. The required temperature can easily change by pressing the +/- buttons.
4. Connect your heating device to TS05. The maximal switching current is 16 A!

Note: After blackout will be the set required temperature saved in TS05

• Button ON for permanent switch-on of your heating. Buttons +/- are inactive after pressing the ON button.
• Button Manu for the display of required temperature and its change with +/- buttons.
• Button OFF for permanent switch-off of your heating. Buttons +/- are inactive after pressing OFF button.
• Indication, that connected heating is switched on.
• Buttons +/- for the setting of required temperature in the Manu mode.

Specification

Specification
Power	230 V / 50 Hz
Hysteresis	0.5°C
Range of possible temp.	+3°C to 40°C
Anti-freeze temp.	yes (3°C)
		Step of temperature setting	by 0.5°C
Minimal step of indication	0.5°C
Measurement accuracy	± 0.5 °C
Protection	IP20
Output	relay, max. 16 A
Operation temp.	0 to 40 °C

ELEKTROBOCK CZ s.r.o.
Blanenská 1763
Kuřim 664 34
Tel.: +420 541 230 216
www.elbock.cz

Reference

Download manual:

Heatdecor TS05 THERMO-SWITCH SOCKET THERMOSTAT USER Manual

Heat decor TS05 THERMO-SWITCH SOCKET THERMOSTAT USER Manual