Thank you for purchasing a FANTINI COSMI S.p.A. product.
Please read this instruction manual carefully and always keep it at hand should you need to consult it for any reason.
The documentation refl ects the characteristics of the product. However, for regulatory or commercial developments, customers should verify the availability of updates relating to this documentation on the FANTINI COSMI S.p.A. website: pdf.fantinicosmi.it
The CH180WIFI LITE is a programmable thermostat with a WiFi connection to control heating and/or cooling system either directly or via the Intelliclima+ APP on a smartphone or tablet.
It has a customised temperature program on a time profi le for every season, which can be changed as needed.
The positive LCD display with white backlighting can also show an intuitive graph of the energy consumption of the entire system.
DESCRIPTION OF DISPLAY KEYS
The fi rst time any touch key is pressed, this activates the functions of the buttons themselves and lights up the display.
The function of the multi-function keys varies depending on the situation and is described by the symbol that appears on the display next to the key.
ATTENTION: Installation must be carried out by qualifi ed personnel in compliance with the requirements concerning the installation of electrical equipment.
Installation operations must be performed with the system’s power disconnected.
The CH180WIFI LITE programmable thermostat must be installed on the wall or on a fl ush mounting box, in 3 units or round, at a height of about 1.5m from the fl oor, in a suitable position to detect the room temperature correctly.
Pry the back panel off the body by applying pressure to the specifi c groove on the lower part.
Remove the insulating protection by unscrewing the specifi c waterproof screw.
Make the electrical connections (refer to the “ELECTRICAL CONNECTIONS” paragraph) and secure the panel to the wall with the supplied screws.
Tighten the screw shown and hook the body onto the panel on the wall.
ATTENTION
Electrical connections must be made by making reference to the following diagram.
The fi rst time any touch key is pressed has no effect, but only activates the functions of the buttons themselves and lights up the display. After 60 seconds of no interaction, the display goes back to the main screen.
DATE AND TIME SETTING
Note: by pressing always allows you to go back to the previous page.
WINTER/SUMMER SETTING
SETTING KEYBOARD LOCK WITH PASSWORD
Note: selecting LOCK YES displays the PROG key. Then follow the procedure described in points 3 and 4.
When the keyboard is locked, you can only press the SEL key.
Pressing SEL allows you to enter the set password and unlock the keyboard.
OPERATING PROGRAMS
The CH180WIFI LITE programmable thermostat has various operating modes called programs to manage heating/air conditioning.
[ MAN ]
[ AUTO ]
SELECTING THE OPERATING PROGRAM
The programs are selected by cyclic sequence.
Note: you can select the program from: [MAN] – [AUTO].
Pressing the DISP key allows you to display certain parameters set according to the active operating program.
SETTING “AUTO” PROGRAM TEMPERATURE
You can set a tCOMF (comfort temperature) and tECO (economy temperature) temperature value between 2° and 40°C.
SETTING “MANUAL” PROGRAM TEMPERATURE
You can set a TMAN temperature value between 2° and 40°C.
Pressing the DISP key allows you to cyclically view the most important parameters.
SERIAL NUMBER 12:01 01-01-18
Note: this number identifi es the single device and is used for the WiFi activation via the “Intelliclima+” app.
HOURS OF USE
The programmable thermostat records the total consumption of the heating and cooling hours.
Note: you can display the user statistics for
Pressing DISP on the CURRENT MONTH, PREVIOUS MONTH, and CURRENT YEAR screens displays a graph with details on use (shown below).
Pressing
To access ADVANCED PROGRAMMING, hold down the PROG key for a few seconds.
SECONDS DISPLAY STAYS ON
Allows you to adjust the display’s backlight (sky blue light) with a duration that can be programmed between 5 and 30 seconds.
DISPLAY LIGHTING INTENSITY
Allows you to modify the luminous intensity of the display, at 10 levels + 0 Off.
DAYLIGHT SAVING TIME
Automatically selects daylight saving time, applicable in Europe and some other countries. This set-up automatically updates the time when it changes (March and October) (default = YES).
ANTIFREEZE TEMPERATURE
Note: the tA that can be set is between 2.0 and 7.0°C or OFF.
ROOM TEMPERATURE CORRECTION
This allows you to modify the read temperature, which, due to the recessed wall installation or perhaps a non-ideal height, might not indicate the true temperature perceived.
Note: the tA that can be set is between 2.0 and 7.0°C or OFF.
DIFFERENTIAL MANAGEMENT
It allows the temperature difference between the OFF and ON status to be managed.
Note: the differential value that can be set is between 0.3 and 5.0, or STD (default = STD).
CELSIUS / FAHRENHEIT
This allows you to choose the temperature display scale between Celsius and Fahrenheit degrees.
Note: the default setting is Celsius.
LANGUAGE SELECTION
Allows you to change the language used during programming.
Note: the default setting is Italian.
WIFI
This displays the WiFi connection status of the device.
INFORMATION
Displays the software version of the programmable thermostat.
RESETTING DEFAULT PARAMETERS
This allows you to reset all the parameters (except date and time) to the factory settings.
The WIFI signal in the programmable thermostat allows the device to be remote-controlled via the Intelliclima+ APP, available free of charge on Google Play Store and Apple App Store.
WIFI ACTIVATION
When switched on for the fi rst time, the programmable thermostat has the WiFi connection off. Activate it by accessing ADVANCED PROGRAMMING and following the instructions.
Select A.P. and press ENTER.
Start the installation wizard in the APP as described in the “INSTALLATION PROCEDURE” paragraph.
INSTALLATION PROCEDURE
WIFI STATUS
The antenna
If the
The symbol of the crossed-out wheeled bin indicates that the products must be collected and disposed of separately from household waste. The batteries and integrated accumulators may be disposed of together with the product. They will be separated at the recycling facilities. A black bar indicates that the product was placed on the market after 13 August 2005. Participating in the separate collection of products and batteries contributes to the correct disposal of these materials and therefore avoids possible negative consequences for the environment and human health. For more detailed information on the collection and recycling programmes available in your country, contact the local authorities or the sales point where you purchased the product.
The conventional warranty lasts 24 months, starting from the date the equipment is installed. The warranty covers all parts of the equipment, with the exception of those subjected to normal wear
FANTINI COSMI S.p.A.
Download Manual:
Fantini cosmi CH180WIFI TOUCH-SCREEN PROGRAMMABLE THERMOSTAT Quick guide
Fantini Cosmi CH180WIFI TOUCH-SCREEN PROGRAMMABLE THERMOSTAT Quick guide
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…