Duowei DW-T901 Digital Room Thermostat User Manual

Duowei DW-T901 Digital Room Thermostat

SPECIFICATION

• Warranty 2 years
• Place of Origin: Zhejiang, China
• Model Number: DW-T901
• Mounting: flush mounting
• Load: 220V±10%,50/60HZ output rated
• Brand Name: Duowei
• Thermostat dimension: 47X32X25CM
• Material Flame Retardant Plastic
• Load 220V±10%,50/60HZ output rated
• Certificate CE
• Application Hotel, KTV, restaurant, household& another big place

INTRODUCTION

The Duowei DW-T901 Digital Room Thermostat is an electronic device that is designed to control the temperature of a room or space in a precise and accurate manner. It is an intelligent thermostat that can be used in residential and commercial buildings to control heating, ventilation, and air conditioning (HVAC) systems. The DW-T901 thermostat is designed to work with a variety of HVAC systems, including boilers, furnaces, heat pumps, and air conditioning units. It has a large, easy-to-read display that shows the current temperature, set temperature, and other important information. The display is backlit, making it easy to read in low-light conditions.

The thermostat is programmable, which means that you can set it to automatically adjust the temperature based on your schedule. This feature can help you save energy and money by reducing the amount of time your HVAC system needs to run when you are not at home or when you are asleep. The DW-T901 thermostat also has a number of advanced features, such as temperature calibration, a built-in temperature sensor, and a variety of temperature control options. It is easy to install and use and comes with a user manual and installation instructions.

WHAT IS IN THE BOX

• Thermostat
• Screws
• User Manual
• External Sensor

Installation

1. Turn off the power to the heating or cooling system at the circuit breaker.
2. Remove the old thermostat from the wall by unscrewing it from its base plate.
3. Connect the wires from the heating or cooling system to the corresponding terminals on the base plate of the new thermostat.
4. If the thermostat requires batteries, insert them into the compartment on the back of the thermostat.
5. Place the base plate of the thermostat onto the wall and use a pencil to mark the screw holes.
6. Use screws and anchors to mount the base plate onto the wall, using the pencil marks as a guide.
7. Snap the thermostat onto the base plate.
8. Turn the power back on at the circuit breaker.

HOW TO WORK

• Install the thermostat: Before you can use the thermostat, you need to install it on the wall of the room you want to control. Follow the manufacturer’s instructions for installation.
• Power on the thermostat: The thermostat is powered by two AA batteries, which you need to insert into the battery compartment located on the back of the device. Once you’ve inserted the batteries, the thermostat will turn on.
• Set the desired temperature: To set the desired temperature, press the up or down arrow buttons on the thermostat until you reach your desired temperature. The thermostat has a range of 5°C to 35°C (41°F to 95°F) to choose from.
• Set the operation mode: The thermostat has three operation modes: manual, temporary manual, and automatic. To set the operation mode, press the “mode” button until the desired mode appears on the screen. In manual mode, the temperature you set will remain constant until you manually change it. In temporary manual mode, the temperature will revert to the scheduled temperature after a set period of time. In automatic mode, the thermostat will automatically adjust the temperature according to the programmed schedule.
• Set the program schedule: The thermostat has a built-in schedule that allows you to set different temperatures for different times of the day. To set the program schedule, press the “program” button and follow the instructions on the screen. You can set up to six different temperature periods per day, and the thermostat will automatically adjust the temperature according to your schedule.
• Wait for the thermostat to adjust: Once you’ve set the temperature and program schedule, the thermostat will start adjusting the temperature of the room or space. It may take a few minutes for the temperature to stabilize, so be patient.

HOW TO OPERATE

• Press the “MODE” button to switch between heating, cooling, or fan mode. The mode currently selected will be indicated on the display.
• Use the up and down arrows to set the desired temperature. The current temperature and the set temperature will be displayed on the screen.
• Press the “HOLD” button to temporarily hold the current temperature. The word “HOLD” will appear on the display. To cancel the hold function, press the “HOLD” button again.
• Press the “FAN” button to select the fan speed. The options are “AUTO” (automatic), “LOW,” “MEDIUM,” and “HIGH.” The current fan speed will be displayed on the screen.
• Use the “PROGRAM” button to access the programming menu. Here you can set up a schedule for your thermostat to automatically adjust the temperature at different times of the day. Follow the on-screen instructions to program your thermostat.
• Press the “RESET” button to reset the thermostat to its default settings.

USAGE

Installation: Before using the DW-T901, it must be properly installed. The thermostat should be mounted on an interior wall, about 5 feet above the floor and away from any sources of heat or cold. Make sure that the wiring is properly connected and that the device is securely fastened to the wall.

Setting the Temperature: To set the desired temperature, press the up or down arrows on the device until the desired temperature is displayed. The temperature can be set in increments of 0.5 degrees Celsius or Fahrenheit, depending on the mode selected.

Programming: The DW-T901 allows you to program different temperature settings for different times of the day. To do this, press the “Program” button and use the up and down arrows to select the desired temperature and time. Once the desired settings are programmed, press the “Program” button again to save the settings.

Manual Override: If you need to temporarily override the programmed temperature settings, you can do so by pressing the “Override” button. This will allow you to set a different temperature for a set period of time, after which the device will revert to the programmed settings.

Other Features: The DW-T901 also has a number of other features, such as a backlight display for easy reading in low-light conditions, a lock function to prevent tampering, and a reset function to return the device to its default settings.

FAQS

Q: What is the Duowei DW-T901 Digital Room Thermostat?
A: The Duowei DW-T901 is a digital room thermostat that is designed to control the temperature of a room or area by communicating with your heating or cooling system.

Q: How does the Duowei DW-T901 work?
A: The DW-T901 works by sensing the temperature in the room and sending a signal to your heating or cooling system to turn on or off based on your desired temperature settings.

Q: Can the Duowei DW-T901 be used for both heating and cooling systems?
A: Yes, the DW-T901 can be used for both heating and cooling systems, making it a versatile option for controlling the temperature of your space.

Q: Is the Duowei DW-T901 easy to install?
A: Yes, the DW-T901 is designed to be easy to install, and comes with clear instructions to guide you through the process.

Q: Can the Duowei DW-T901 be programmed to different temperature settings for different times of the day?
A: Yes, the DW-T901 has a programmable feature that allows you to set different temperature settings for different times of the day, providing greater control over the temperature of your space.

Q: Does the Duowei DW-T901 come with a warranty?
A: Yes, the DW-T901 comes with a manufacturer’s warranty, which may vary depending on your location and the retailer you purchase it from.

Q: Is it simple to install the Duowei DW-T901 Radiator Thermostat?
A: Yes, it’s simple to install the Duowei DW-T901 electric radiator thermostat. It comes with an installation manual and is simple to install using the included adapters on your radiator.

Q: How long is the Duowei DW-T901 Electric Radiator Thermostat’s guarantee good for?
A: The one-year guarantee that comes with the Duowei DW-T901 Electric Radiator Thermostat covers any flaws or faults that might develop during routine use.

Q: Google Assistant and Amazon Alexa both support the Menred Duowei DW-T901 Thermostat, correct?
A: The Duowei DW-T901 Heating Thermostat is voice-command capable and works with both Google Assistant and Amazon Alexa.

Q: How precise are thermostats for heating?
A: Your thermostat is accurate and effective enough if the temperature is the same on the thermometer and the thermostat.

Q: Why won’t my Duowei DW-T901 heating thermostat work?
A: If your thermostat won’t turn on, try changing the batteries, activating it, ensuring that the temperature is set correctly, and checking the power source and airflow.

Q: How can I check the functionality of my heating Duowei DW-T901 thermostat?
A: According to A, as air passes through the ducting, you might hear a soft clicking sound. To determine the air’s temperature, you might feel a vent. Your thermostat might need to be changed if nothing happens after making the adjustments for a minute or two.

Duowei DW-T901 Digital Room Thermostat User Manual