Danfoss Eco™ is a stand-alone radiator thermostat for residential use. Danfoss Eco™ is battery-powered, compact and easy to operate with a manual hand wheel and single button. Danfoss Eco™ is programmed with a smartphone App using Bluetooth connectivity. Danfoss Eco™ is easy to install, in just 30 seconds! Adapters are available for all thermostatic valves manufactured by Danfoss and most other radiator valve manufacturers.
Ordering
Language | Adapters (included) | Code no. | |
Danfoss Eco™ Installer Pack | DK | RA (pre-mounted) | 014G1000 |
FR, ES, IT, SE, PT, BG, NL, FI, LT, LV, EE, SK, NO, SI, HR, RO, HU, CZ, PL, TR, UA, UK | RA, M30 | 014G1001 | |
CH | RA, M30 | 014G1002 | |
RU | RA, M30 | 014G1003 | |
UK (Combi, Bi-Di valve) | RA (pre-mounted) | 014G1020 | |
UK (Combi, Bi-Di valve, RLV-D) | RA (pre-mounted) | 014G1021 | |
Danfoss Eco™ Retail Pack | DK | RA, M30, RAV, RAVL | 014G1100 |
DE | RA, M30, RAV, RAVL | 014G1101 | |
FR | RA, M30, M28 Comap | 014G1102 | |
HU, HR, RO, SK, UA | RA, M30, RTD | 014G1103 | |
IT | 014G1104 | ||
PL, CZ, LT, EE, LV, SI | RA, M30, RTD | 014G1105 | |
NL, BE, NO, FI, IS, TR | RA, M30 | 014G1106 | |
ES, PT | RA, M30, M28 Orkli | 014G1107 | |
UK | RA, M30 | 014G1108 | |
AT | RA, M30, RTD, M28 Herz | 014G1109 | |
SE | RA, M30, M28 MMA | 014G1110 | |
RU | RA, M30, M28 Herz, Giacomini | 014G1111 | |
UK, DE, CH, AT, DK, FR, IT, PL, CZ | RA, M30, RAVL, RAV | 014G1115 |
Accessories
Type | Code no. |
Adapters for RAV and RAVL valves | 014G0250 |
Adapter for RA valves | 014G0251 |
Adapter for K (M30 x1.5) valves | 014G0252 |
Adapter for RTD valves | 014G0253 |
Adapter for M28 MMA valves | 014G0264 |
Adapter for M28 Herz valves | |
Adapter for M28 COMAP valves | |
Adapter for M28 Orkli valves | 014G0257 |
014G0263 | |
Adapter for Giacomini valves |
Thermostat type | Programmable electronic radiator valve controller |
Recommended use | Residential (pollution degree 2) |
Actuator | Electromechanical |
Display | LCD with white backlight |
A | |
Control | PID |
Power supply | 2 x 1.5 V alkaline AA batteries |
Power consumption | 3 mW in standby, 1.2 W when active |
Trasmission Frequency / Power | 2,4 GHz / <2,1mW |
Battery life | Up to 2 years |
Low battery signal | |
Ambient temperature range | 0 to 40 °C |
Transportation temperature range | -20 to 65 °C |
Maximum water temperature | 90 °C |
Temperature setting range | 4 to 28 °C |
Measurement interval | Measures temperature every minute |
Clock accuracy | +/- 10 min/year |
Spindle movement | Linear, up to 4.5 mm, max. 2 mm on valve (1 mm/s) |
Noise level | <30 dBA |
Type 1 | |
Open-window function | Activated at temperature decrease |
Weight (incl. batteries) | 198 g (with RA adapter) |
IP class | 20 (not to be used in hazardous installations or in places where it will be exposed to water) |
Approvals, markings etc. |
Intertek |
App Advanced Settings
Measuring the room temperature
Danfoss Eco™ is measuring the temperature
with multiple built-in sensors to ensure accurate control. Based on these readings the room temperature is calculated for an area approx. 20cm in front of the display. This allows Danfoss Eco™ to control the actual room temperature very accurately. Be aware that sources of cold or heat, e.g. fireplace, direct sun or draft, might affect the function of Danfoss Eco™
App Scheduling
Easy App programming via Bluetooth on smart phone or tablet. Up to 3 setback periods per day and the option to copy the schedule across to other days.
Software Updates
Software updates are automatic, prompted via the App. The data security of the Danfoss Eco™ thermostat and App that is paired to your smartphone is guaranteed. The system is tested by independent specialists.
Open-window function
Danfoss Eco™ features an Open-window function, which closes the valve if the room temperature is falling dramatically, thus reducing the heat loss. before Danfoss Eco™ returns to its original settings. When Open-window has been activated, the function is quarantined for 45 minutes.
Adjusting to the valve
During the first night of operation Danfoss Eco™ will shut off the radiator heat and then open again to detect the exact opening point of the valve. This will allow Danfoss Eco™ to control the heat as efficiently as possible. If necessary, the procedure is repeated once a night for up to a week. You might experience the valve being warm during the adjustment procedure, regardless of the room temperature.
Child lock
Activating the child lock feature will protect the settings from tampering.
Adaptive learning
During the first week of operation Danfoss Eco™ learns when it is necessary to start heating the room in order to reach the correct temperature at the correct time. The intelligent control will continuously adjust the heating time compared to seasonal temperature changes.
Automatic valve exercising
To keep the radiator valve functional and at its best, Danfoss Eco™ automatically exercises the valve every Thursday at approx. 11:00 hrs by fully opening and then returning to its normal setting.
Adapters
Danfoss A/S
DOWNLOAD MANUALS:
Danfoss 014G1115 Eco Programmable Radiator Thermostat Product Data Sheet
Danfoss 014G1115 Eco Programmable Radiator Thermostat Product Data Sheet
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…