Comfortheat

Comfortheat MTC Electric & Hydronic Programmable Thermostat Operations Manual

Comfortheat MTC Electric & Hydronic Programmable Thermostat

MTC Operations Manual

A Comfort Heat floor heating system has been installed on your floor. Underfloor heating will warm from the floor up giving you an unparalleled feeling of comfort. This heating system is controlled by an electronic thermostat that uses a floor sensor for optimum temperature control.

PRIOR TO TURNING ON
The sub-floor and screed have to be fully cured before turning the heating on. For sand & cement screeds you must wait at least 3 weeks before turning them on. With Ultra-thin installations, you must wait 2-3 days for the tile glue to cure. When turning on the floor for the first time, increase the floor temperature gradually over 2-3 days.

PRODUCT WARRANTY

  • TILE CABLE – 10 years
  • SLAB CABLE – 10 years
  • CARPET MATS – 5 years
  • TIMBER MATS – 5 years THERMOSTAT & SENSOR – 2 years

SUGGESTED TEMPERATURE SETTINGS

  • BATHROOM – 24 ~ 28ºC
  • LARGE TILED AREA – 21 ~ 22ºC CARPET – 19 ~ 21ºC
  • TIMBER – 24ºC
  • SLAB – 21ºC

The MICROTEMP RANGE of electronic thermostats is specifically designed for underfloor heating systems. The thermostat is vertically mounted and has a 2-pole isolator with a 16A output relay.
MTC – The MTC thermostat is a manual thermostat. You simply switch it on and set the desired temperature. When the red light is on, the floor is heating. If there is no light, the floor is either off or at a selected temperature. A flashing light means there is an error.

TECHNICAL DATA

  • Supply Voltage: 240Vac, 50/60hz
  • Output Relay: 16A SPST, 3600W max
  • Switching Differential: 0.4 degC
  • Built-in Switch: 2 pole 16A
  • Temperature Range: 0/+50 degC
  • Housing/protection: IP20 & IP21
  • Dimensions (HxWxD): 115mm x 84mm x 58mm
  • Sensor Length: 3m
  • Warranty: 2 years
  • Mounted: Vertically/Flush mounted

Comfort Heat Australia Pty Ltd
www.comfortheat.com.au
sales@comfortheat.com.au
p: 02 9979 8600 f: 02 9979 7706

REFERENCE:

DOWNLOAD MANUALS:

Comfortheat MTC Electric & Hydronic Programmable Thermostat Operations Manual

OTHER MANUALS:

Comfortheat MTC THERMOSTAT Wiring Diagram

 

Comfortheat MTC Electric & Hydronic Programmable Thermostat Operations Manual

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago