bticino XW8002W Smarther thermostat Installtion Manual

bticino XW8002W Smarther thermostat

Installation

Caution

• Avoid tightening the screws too much, in order to prevent any base distortion that may compromise the correct installation of the device.
• The front must be tightly fixed to the base and the fastening clip should lock into place.
• Once the installation has been done, wait for 2 hours before checking the read temperature.

DESCRIPTION

• Touch screen display
• Temperature/humidity display
• “Boost” mode indicator
• Wi-Fi connection key
• Keys for temperature setting
• Boost mode activation
• Reset key (keep pressed for 10”, it restores the factory settings)
• Manual mode indicator
• ON heating indicator
• ON cooling indicator
• “OFF thermostat” indicator;
• C temperature (antifrost) in heating function; 35 °C temperature (heat protection) in cooling function.
• Wi-Fi connection indicator
• Connection clamps (see diagrams

Wiring diagrams

• System only for heating with clean contact (e.g. boiler agreement)
• System only for heating with load to be controlled to the network voltage (e.g. 230Vac solenoid valve)
• Heating and cooling with floor system
• Heating and cooling with different systems

Available functions

• Management with Home + Control App
• Display and change the temperature
• Boost
• Room humidity display
• Compatible with Netatmo thermostatic valves
• Compatible with Google Assistant
• Compatible with Alexa
• Compatible with HomeKitt

Caution: remote operation may cause damage to people or property.

Warnings and consumer rights

• Touching the units with wet hands is forbidden
• Using liquid cleaners or aerosols is forbidden
• Blocking the ventilation openings is forbidden
• Modifying the devices is forbidden
• Removing protective parts from the devices is forbidden
• Installing the units near liquids and powders is forbidden
• Installing the units near heat sources is forbidden
• Installing the units near harmful gases, metal dusts or similar is forbidden
• Fastening the units on unsuitable surfaces is forbidden
• Danger of electrical shock
• Switch the power supply OFF before any work on the system
• Caution: Installation, configuration, starting-up and maintenance must be performed exclusively by qualified personnel.
• Check that the wall installation has been carried out correctly
• Lay out the wires respecting the standards in force
• Connect the power supply wires as indicated
• Use only the items indicated in the technical specifications for any system expansions

Technical data

 Apple HomeKit technology

Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, Apple TV, or iPad set up as a home hub. It is recommended that you update to the latest software and operating system. Apple HomeKit technology provides an easy, secure way to control your home’s thermostats from your iPhone, iPad, Apple Watch, HomePod, or Mac using the Apple Home app. Control your HomeKit-enabled accessories with your voice by asking Siri directly from your iPhone, iPad, Apple Watch, HomePod, or Mac Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards Apple Inc. All rights reserved. Apple, the Apple logo, Apple TV, Apple Watch, HomeKit, iPad, iPhone, Mac, and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. HomePod, iPadOS, Multi-Touch, and tvOS are trademarks of Apple Inc. App Store, iCloud, and iTunes Store are service marks of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Other product and company names mentioned herein may be trademarks of their respective companies. Google, Google Play, Android, and related marks and logos are trademarks of Google LLC For device configuration and installation and for any other information, refer to the documentation that can be downloaded from the website. for “Home + Control” to download the application in Apple Store or Google Play This device includes Open Source software. For information on licenses and software used, please see the product technical sheet

ANDROID: Requires Android 5.0 and higher with access to Google Play.
iOS: Requires an iPhone, iPad, or iPod touch with iOS 12,0 or later

Warning:
Unique Apple HomeKit installation code to be stored somewhere safe.

Apple HomeKit: The user will be asked for this code during the installation of the iOS mobile app.

BTicino

• Hereby, BTicino S.p.A., declares that the radio equipment types Smarter with Netatmo item XW8002W is in compliance with Directive 2014/53/EU.
• The full text of the EU declaration of Conformity is available at the following internet address: www.bticino.it/red

Reference

Download Manual:

bticino XW8002W Smarter thermostat Installation Manual

bticino XW8002W Smarter thermostat Installtion Manual