Congratulations! You are in control of one of the easiest-to-use thermostats on the market today. This thermostat has been designed to provide you with years of reliable performance and comfort control.
Advanced User Options
User options allow you to customize some of your thermostat’s features. Most users will not need to make any changes to the settings in this section.
To access the User Options menu, press and hold the RETURN button for approximately 3 seconds until the screen changes and displays the first User Option. Press the SpeedBar® or to change the
setting for the displayed User Option. After you have changed your desired setting, press NEXT
(HOLD) to advance to the next User Option. You may also press BACK (PROG) to move backwards through the User Options. When your changes are complete, press RETURN to exit.
NOTE: Some user options may not be available, depending on how your thermostat was configured in the Installer Settings (see Installer Guide). A detailed description of each User Option follows this table.
No. | User Options | Factory Default | Setting Options | Comments | Pg. |
1 | Filter Service Monitor | OFF | OFF | Disables filter service monitor feature. | 10 |
30, 60, 90, 120, 180, 365 | Selects a number of days that must pass before the thermostat will flash a Service Filter reminder in the display screen. | ||||
2 | UV Light Service Monitor | OFF | OFF | Disables UV service monitor feature. | 10 |
180, 365 | Selects a number of days before the thermostat will flash a Service UV reminder in the display screen. | ||||
3 | Humidifier Pad Service Monitor | OFF | OFF | Disables pad service monitor feature. | 10 |
180, 365 | Selects a number of days before the thermostat will flash a Service Humid reminder in the display screen. | ||||
4 | Extended Hold Period | LONG | LONG | Selects long (permanent) hold mode. | 10 |
24HR | Selects 24 hour (temporary) hold mode. | ||||
5 | Temporary Override Adjustment Limit | 0 ADJ | 0, 1, 2, or 3 ADJ 0 | Selects a temporary temperature adjustment limit of 0 (disabled), 1˚, 2˚ or 3˚. | 11 |
6 | Program Override Time Limit | 4 TEMP | 4, 3, 2 or 1 TEMP | Selects a temporary program override time limit of 1, 2, 3 or 4 hours. | 11 |
7 | Thermostat Lock Code | 000 | 0-9 | Select a 3 digit lock code of 0-9 for each digit. | 11 |
8 | Wi-Fi Clear | WIFI | WIFI | No changes to Wi-Fi network settings. | 12 |
CL WIFI | Clears Wi-Fi network settings. |
(Filter, UV and Humidifier Pad)
User Options 1, 2 and 3
There are three user selectable service monitors that will display reminders for a required air filter, UV bulb or humidifier pad replacement. The SERVICE segment flashes in the display along with FILTER, UV or HUMID. When the service interval has been reached, and required cleaning or replacement has been performed, press the RETURN button to reset the timer. Select OFF or a set number of days before the reminder will appear.
User Option 4
The Extended Hold Period lets you select the period your thermostat will hold the temperature when the HOLD mode is activated (See Setting the Temperature, page 23). When LONG is selected the thermostat will hold your temperature indefinitely. When 24HR is selected, the thermostat will hold your temperature for 24 hours and then return to the current program at that time. Not available in non-programmable mode.
User Option 5
The Temporary Override Adjustment Limit will limit how much the temperature can be adjusted from the current set point when the thermostat is used in the programmable mode. This setting will not allow the user to override the temperature past the selected limit amount of 1, 2 or 3 degrees from the current set point. When the user reaches the adjustment limit the screen will flash ADJ. A setting of 0 disables the adjustment limit. The Temporary Override Adjustment Limit can also be used in the non-programmable mode if the keypad lockout security level is set to level 1 (See Installer Guide).
User Option 6
The Program Override Time Limit allows you to set a maximum time limit (in hours) that the thermostat will return to the program after a temporary temperature adjustment has been made (See Setting the Temperature, page 23). You may select 1, 2, 3 or 4 hours. Not available in non-programmable mode.
User Option 7
The Thermostat Lock Code sets a 3-digit code that you may use at any time to lock or unlock the thermostat. Setting the code in the user options mode does not activate the lock feature (See Locking/Unlocking Thermostat, page 28). You may choose a 3-digit code with each digit being 0-9.
User Option 8
Use this setting if you no longer want to be connected to your Wi-Fi network or if you change Wi-Fi routers. Select WIFI to skip changes to your network settings. Select CL WIFI to clear all Wi-Fi network settings. You can set up Wi-Fi again at a later time if desired (see Wi-Fi Setup Guide).
Setting the Time and Day
Tips Before Setting Your Program Schedule
This thermostat has been configured with one of the following programming options:
This thermostat comes pre-programmed with a default energy saving program. The following tables outline the pre-programmed times and temperatures for heating and cooling in each of your 4 daily events (2 events if configured for commercial mode). If you wish to use these settings then no further programming is necessary:
Residential 7 Day Programming Factory Settings | |
4 Event | All Days |
MORN | Time: 6:00 am Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) |
DAY | Time: 8:00 am Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C) |
EVE | Time: 6:00 pm Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) |
NIGHT | Time: 10:00 pm Heat: 62˚ F (17˚ C) Cool: 82˚ F (28˚ C) |
Commercial 2 Event Programming Factory Settings | |
2 Event | All Days |
OCCUPIED | Time: 8:00 am Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) |
UNOCCUPIED | Time: 6:00 pm Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C) |
Residential 5-2 Day Programming– Weekday/Weekend Factory Settings | ||
4 Event | Weekday | Weekend |
MORN | Time: 6:00 am Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) | Time: 6:00 am Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) |
DAY | Time: 8:00 am Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C) | Time: 8:00 am Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C) |
EVE | Time: 6:00 pm Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) | Time: 6:00 pm Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C) |
NIGHT | Time: 10:00 pm Heat: 62˚ F (17˚ C) Cool: 82˚ F (28˚ C) | Time: 10:00 pm Heat: 62˚ F (17˚ C) Cool: 82˚ F (28˚ C) |
The 7 day residential programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 4 event program schedule.
Setting All 7 Days at Once (SpeedSet®)
NOTE: Setting all 7 days at once will copy over any previously programmed individual days.
Setting Individual Days (7 Day Residential)
The 5-2 day residential programming mode allows you to program Monday – Friday with one 4 event schedule and then allows you to change Saturday and Sunday with a different 4 event schedule.
The 7 day commercial programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 2 event program schedule.
Setting All 7 Days at Once (SpeedSet®)
NOTE: Setting all 7 days at once will copy over any previously programmed individual days.
Setting the SYSTEM Control Mode
The System Control has 5 modes of operation – AUTO, COOL, OFF, HEAT and EMER. The mode can be selected by pressing the SYSTEM button to scroll through the different modes.
NOTE: Depending on how your thermostat was configured, some system modes may not be available.
Setting the FAN Control Mode
The Fan Control has 3 modes of operation – AUTO, ON, and PROG. The mode can be selected by pressing the FAN button to scroll through the different modes.
Setting the Temperature
Status Indicators
Status indicators appear in the display to let you know if your system is heating, cooling or off.
Program Event Indicators
Program event indicators appear in the display to let you know what part of your current program is active.
Resetting the Thermostat
This thermostat provides you with a reset button that will erase all of your user settings and programming.
The reset feature does not affect the Installer Settings.
To reset the thermostat, use a small object such as a tooth pick or paperclip and gently press the button located inside the small hole on the front of the thermostat housing labeled “RESET ”.
NOTE: You cannot reset the thermostat if it is locked.
Auto Changeover Mode
Auto Changeover mode is a feature enabled/disabled in the Installer Settings (see Installer Manual). If enabled, it is selected by pressing the SYSTEM button until AUTO HEAT or AUTO COOL appears in the display. When Auto Changeover mode is enabled and selected, the system automatically switches between heating and cooling when the room temperature meets the programmed heating or cooling set points. To operate properly, the thermostat requires a “dead band” setting to eliminate program conflicts. The dead band is set in the Installer Settings (See Installer Guide). The default setting is 3° F. Therefore, you will not be able to set your heat or cool temperature within 3° F of each other. If a setting is made in either heating or cooling which violates the dead band, the opposite mode will adjust up or down automatically to maintain the pro-grammed dead band spacing.
Adaptive Recovery Mode (ARM™)
Adaptive Recovery Mode is a feature enabled/disabled in the Installer Settings (See Installer Guide).
If enabled, the feature is automatically present while in programmable mode.
Adaptive Recovery Mode tries to reach your desired heating or cooling temperature at the time you have set in your current program schedule, after a setback period. For example, if you set your heat down to 62° at night and have a set point of 70° scheduled for 7:00 AM, the thermostat may turn on your heating system early in order achieve a temperature of 70° by 7:00 AM. This feature does not operate when the thermostat is in HOLD mode, if the program is temporarily if emergency heat is selected on a multistage heat pump system.
Programmable Fan Mode
Programmable Fan Mode is selected by pressing FAN until PROG appears in the display. It is only available in 7 or 5-2 Day programmable mode.
Programmable Fan Mode allows the user to run the fan continuously during a selected program event. To use this feature, select fan ON while setting program events.
(See “Setting Your Program Schedule”, page 13).
Compressor Protection
Compressor protection is enabled/disabled in the Installer Settings (See Installer Guide). If enabled, this feature is automatically present in cooling and/or heating modes. This thermostat includes an automatic compressor protection delay to avoid potential damage to your system from short cycling. This feature activates a short delay after turning off the system compressor. Additionally, for multi-stage heat pump systems, this thermostat provides cold weather compressor protection by locking out the compressor stage(s) of heating for a period of time after a power outage greater than 60 minutes. This cold weather compressor protection can be manually overridden at any time by changing the system mode to OFF momentarily, then back to HEAT.
Locking and Unlocking the Thermostat
Your 3-digit Lock Code is set in the “User Options” portion of this manual (See “Setting User Options”, page 8, 9 and 11). Once the code is set, the thermostat can be locked or unlocked at any time by entering that code. To lock or unlock the thermostat, press and hold the DAY/TIME and HOLD buttons together for 5 seconds. The screen will change, displaying 000 and LOCK will be flashing. Press the SpeedBar® or to enter the first digit of your lock code and then press
NEXT* to advance to the next digit. Repeat this process to enter the second and third digit of your lock code. After entering the third digit, press RETURN. *BACK and NEXT are secondary functions of the PROG and HOLD buttons.
If you entered a valid code the thermostat will be locked or unlocked (depending on its previous state).
When locked, the word LOCKED appears in the display (Figure 1). If an invalid code is entered the word NO will briefly appear, indicating that an incorrect code was entered (Figure 2).
AC Power Monitor
The AC Power Monitor feature is enabled in the Installer Settings (See Installer Guide). If enabled, this feature will automatically be present. If your thermostat was hardwired (power provided from the system with batteries as a backup) then the AC Power Monitor feature will indicate when a loss of power to the thermostat has occurred by flashing NO POWR.
Indoor Remote Sensing
Indoor remote sensing is achieved by installing a Braeburn® remote indoor sensor and is configured in the Installer Settings (See Installer Guide).
If a Braeburn indoor remote sensor was installed and properly configured in the Installer Settings, the thermostat will sense temperature at a remote location or a combination of a remote location and the thermostat location.
Outdoor Remote Sensing
Outdoor remote sensing is enabled by installing a Braeburn® remote outdoor sensor. No additional configuration is required. If a Braeburn outdoor remote sensor was installed you may press the PROG and HOLD buttons at the same time to view the outdoor temperature.
Thermostat Cleaning
Never spray any liquid directly on the thermostat. Using a soft damp cloth wipe the outer body of the thermostat. Never use any abrasive cleansers to clean your thermostat.
Changing the Batteries
This thermostat requires two (2) properly installed “AA” alkaline batteries to maintain the thermostat clock and to provide power for the thermostat if 24 volt AC power is not connected. (See Installer Guide).
If batteries become low, a battery indicator will appear in the display. You should change your batteries immediately when you see the low battery signal by following
these instructions.
When installed by a professional contractor, this product is backed by a 5 year limited warranty. Limitations apply. For limitations, terms and conditions, you may obtain a full copy of this warranty:
Store this manual for future reference.
For additional information visit: www.braeburnonline.com For online access visit: www.bluelinksmartconnect.com
Download MANUALS
Braeburn 7300 Programmable Smart Wi-Fi Thermostats User Manual
OTHER MANUALS
Braeburn 7300 Smart Wi-Fi Thermostat User Manual
Braeburn 7300 Programmable Smart Wi-Fi Thermostats User Manual
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…