BEOK TOL63R LCD Screen R/C Thermostat Instruction Manual

BEOK TOL63R LCD Screen R/C Thermostat

Product Summary
TOL63R-AC Series thermostats are designed to control the fans and valves in air conditioner applications via comparison of the room temperature and setting temperature as reaching the aim of comfort and saving energy.

Technical Parameter

Power Supply	AC200~240V, 50/60HZ
Current Load	3A~5A
Power Consumption	<0.5W
External Material	PC+ABS (flame retardant）
Sensing Element	NTC
Set Temp. Range	10℃ – 40℃
Accuracy	±1℃
Dimension	86x86x13.3mm
Ambient Temp.	0-45℃,5-95％RH(Non-condensing）
Storage Temp.	-5~55℃
Installation Box	80x80mm

Main Functions and Characteristics

1. Square LCD screen display.
2. BIue or White backlight for choosing;
3. 2 pipe or 4 pipes for choose.
4. 3 Fan speed + auto speed
5. Timer on/off function for days or weekly.
6. Room temp calibration function.
7. Selectable 80mmx8Omm hidden box.
8. Can be remote-controlled by the controller.

User Interface Explanation

Model Definition

AC 2: Two pipes, for air conditioning
AC 4: Four pipes, for air conditioning
For example: TOL63R-AC2

Model Spec

Model	Spec	Fan Speed	Timer Switch	Remote controller
TOL43-AC2	2 Pipe	3 Fan speed+Auto	√	optional
TOL43-AC4	4 Pipe	3 Fan speed+Auto	√	optional

Wiring Diagram

Operation Instruction

1. Setting Power on/off
   Press to turn on/off the power.
2. Setting Temperature
   Press to set the temperature.
3. Setting the Clock
   • Press to set the minute, hour and week.
   • Press for adjusting.
4. Setting the System Mode
   Press to select heating, cooling, or ventilation.
5. Setting the Fan Speed
   
   • Press to select the fan speed.
   • is Low speed(Factory default);
   • is Mid speed;
   • is High speed;
   • is Auto speed.
     In auto mode, the fan will run according to the comparison of room temperature and set temperature.
6. Setting the Day Program Schedules.
   • Press and hold for 3 sec., hh will flash in the position of hh: mm.
   • Press to adjust the hour.
   • Press, mm will flash in the position of hh: mm.
   • Press to adjust the minute.
   • The above are the steps to set real-time.
   • Then go into a day programmable setting.
   • Press, 1 (for example) will flash in the position of 1234567.
   • Press to adjust the week.
   • Press, period 1 and hh will flash.
   • Press to adjust the hour.
   • Press, period 1 and mm will flash.
   • Press to adjust the minute.
   • Press to confirm the setting;
   • Press, period 2, and hh will flash.
   • Press to adjust the hour.
   • Press, period 2 and mm will flash.
   • Press to adjust the minute.
   • Press to confirm the setting;
   • Press, period 3, and he will flash.
   • Press to adjust the hour.
   • Press, period 3 and mm will flash.
   • Press to adjust the minute.
   • Press to confirm the setting;
   • Press, period 4, and he will flash.
   • Press to adjust the hour.
   • Press, period 4 and mm will flash.
   • Press to adjust the minute.
   • Press to confirm the setting;
   • Press, the loop will display on the screen.

The one-day programmable setting is finished.

Setting the Regular Boot

Press for more than 3 seconds, after setting the time, press until and “hh” twinkling. press to adjust the hours.

After the adjustment of hours, press until the “mm” twinkling, press to adjust the minutes. After the completion of all adjustments, press to confirm, then does not twinkle,  Regular boot setup is complete.

The operation of canceling Regular boot is the same, press to the state of Regular boot, then press, the is twinkling, Regular boot has been canceled.

Setting the Off Timer

After the setting of Regular boot, press again, until and “hh” twinkling, press to adjust the hours. After the adjustment of hours is complete, press until the  “mm” twinkling, press to adjust the minutes.
After the completion of all adjustments, press to confirm then does not twinkle, Off timer setup is complete.

The operation of canceling Off timer is the same, press to the state of Off timer, then pressing, the is twinkling, Off timer has been canceled.
The setting of the third period and fourth period are the same as the first and second period, the icons are (on, off/into the room, out of the house)

Setting the Circulation of Timer Switch

After setting the time of timer switch, press the, there will be “LooP”, then press, the week display area will display the day of the week, or the transformation of “12345″ “123456″, or “1234567″.

If the screen only displays the day of the week, then the timer switch setting is valid only for the day.

If it displays “12345″, then the timer switch is valid from Monday to Friday, and Saturday and Sunday will be invalid.

If it displays “123456″, then the timer switch is valid from Monday to Saturday, and Sunday will be invalid. If it displays “1234567″, then the timer switch is valid every day.

Advanced Setting Mode

Temperature Adjustment
(Attn: Only when your room temperature is different from the actual temperature, do you do this operation.)

In power-on status, press about 7 seconds, then “XX X” will display on the bottom of the screen. For Example: “26 5” means temp is 26.5℃ then you can press to modify the temperature.

It will confirm automatically after the correct temp twinkling 7 seconds.

Fan Coil Controlling Mode Setting(Only for 2 pipes)
(You can select the fan coil In control & Out of control.)

In power-on status, press about 7 seconds, “XX X” will display on the bottom of the screen, then continue to press again, “F00” or “F01” will display. Press to choose  “F00” or “F01”

In “F00” mode, when room temperature reaches the set temp, the fan coil stops working.
In “F01” mode, when room temperature reaches the setted temp, the fan coil goes on working.

Installation Instruction

This product is suitable for standard 80*80mm wall boxes and 60 mm European round boxes.

1. Connect the line of power and valve into the terminals. Fix the wall plate into the wall box by a screw driver.
2. Connect the lines with the LCD board.
3. Connect the LCD board to the wall plate.
   NOTICE: The installation wire should be 1.5-2.5mm2.

ATT:

Thank you for buying this product!

Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.

In the box you will find:

Model	TOL63R-AC2
Thermostat	√
User Manual	√
Screws	√
External sensor	√

PS: if you need a remote controller,you can order it separately.

Our Service:

We offer a warranty of 24 months from the sales day.
During the warranty, if it belongs to a quality issue, we will fix or replace them for you for free after testing them.
If it is not a quality problem or beyond the warranty time, we will charge for the after-sales service.

Warning:

The symbol means the unit is being installed, it may cause electrical shock hazards during maintenance, so please make sure it is operated by a professional technical worker.

REFERENCE

Download Manual

BEOK TOL63R LCD Screen R/C Thermostat Instruction Manual

BEOK TOL63R LCD Screen R/C Thermostat Instruction Manual