Beok

BEOK TOL43-AC LCD Screen Thermostat Instruction Manual

BEOK TOL43-AC LCD Screen Thermostat

Product Summary:

TOL43-AC Series thermostats are designed to control the fans and valves in air conditioner applications via comparison of the room temperature and setting temperature as reaching the aim of comfort and saving energy.

Technical Parameter:

Power Supply AC200~240V, 50/60HZ
Current Load 3A~5A
Power Consumption <0.5W
External Material PC+ABS (flame retardant)
Sensing Element NTC
Set Temp. Range 10℃ – 40℃
Accuracy ±1℃
Dimension 86x86x13.3mm
Ambient Temp. 0-45℃,5-95%RH(Non-condensing
Storage Temp. -5~55℃
Installation Box 80x80mm

Main Functions and Characteristics

  1. Square LCD display, more clear to see.
  2. Blue or white back light for customer choose.
  3. Two pipe or four pipe for choice.
  4. Fan speed+auto.
  5. Timer switch function, 4 period settings.
  6. Selectable 80mmx80mm hidden box.
  7. Room temp calibration function.
  8. Precise comfort control keeps the temperature within 1 °C of the level you set.

User Interface Explanation

Model Definition

  • AC 2: Two pipes, for air conditioning
  • AC 4: Four pipes, for air conditioning
  • For example TOL43-AC2

Model Spec

Spec Fan Speed Timer Switch Fan coil controllable
TOL43-AC2 2 Pipe 3 Fan speed+Auto
TOL43-AC4 4 Pipe 3 Fan speed+Auto

Wiring Diagram

Operation Instruction

Setting Power on/off
Press to turn on/off the power.

Setting Temperature
Press to set the temperature. Factory default is 26 ℃.

Setting the System Mode
Press M to select heating, cooling or Factory Default is ventilation.

Setting the Fan Speed

  • Pressto select the fan speed.
  • is Low speed(Factory default);
  • is Mid speed;
  • is High speed;
  • is Auto speed.

In auto mode, the fan will run according to the comparison of room temperature and set temperature.

Setting the Day Program Schedules.

  • Press and hold M for 3 sec., hh will flash in the position of hh: mm.
  • Pressto adjusts the hour.
  • Press M , mm will flash in the position of hh: mm.
  • Pressto adjusts the minute.
  • The above is the steps to set real-time.
  • Then go into the day programmable setting.
  • Press M, 1 (for example) will flash in the position of 1234567.
  • Pressto adjusts the week.
  • Press M , period 1Press M , period 1
  • Pressto adjusts the hour.
  • Press M , period 1 and mm will flash.
  • Pressto adjusts the minute.
  • Press to confirm the setting;
  • Press M , period 2 and mm will flash.
  • Press to adjust the minute.
  • Pressto confirm the setting
  • Press M , period 3, and hh will flash.
  • Press M , period and mm will flash. Pressto adjusts the minute.
  • Pressto confirm the setting;
  • Press M , period 4, and hh will flash. Pressto adjusts the hour.
  • Press M, period 4and mm will flash.
  • Presto adjusts the minute. Pressto confirm the setting;
  • Press M, and the loop will display on the screen. The one-day programmable setting is finished.

Setting the Regular Boot
Press M for more than 3 seconds, after setting the time, press until and “hh” twinkling. Press to adjust the hours.
After the adjustment of hours, press M until the “mm” twinkling, and press to adjust the minutes. After the completion of all adjustments, press to confirm, then do not twinkle, Regular boot setup is complete.
The operation of canceling the Regular boot is the same, press M to the state of the Regular boot, then pressing, the is twinkling, the Regular boot has been canceled.

Setting the Off Timer

After the setting of Regular boot, press M again, until “hh” twinkles, press to adjust the hours. After the adjustment of hours is complete,press until the “mm” twinkling, press to adjust the minutes. After the completion of all adjustments, press to confirm then does not twinkle, Off timer setup is complete.

The operation of canceling the Off timer is the same, press to the state of Off timer, then pressing, the is twinkling, Off timer has been canceled. The setting of the third period and forth periods are same as the first and second periods, the icons are 9 on, off/into the room, out of the house

Setting the Circulation of Timer Switch
After setting the time of the timer switch, press the M, there will be “LooP”, then press, the week display area will display the day of the week, or the transformation of “12345″ “123456″,or “1234567″.
If the screen only displays the day of the week, then the timer switch setting is valid only for the day. If it displays “12345″, then the timer switch is valid from Monday to Friday,
and Saturday and Sunday will be invalid.
If it displays “123456″, then the timer switch is valid from Monday to Saturday, and Sunday will be invalid. If it displays “1234567″, then the timer switch is valid every day.

Advanced Setting Mode

Temperature Adjustment
(Attn: Only when your room temperature is different with the actual temperature, you do this operation.)
In power-on status, press about 7 seconds, then “XX X” will display on the bottom of the screen. For Example: “26 5” means temp is 26.5℃ then you can press to modify the temperature. It will confirm automatically after the correct temp twinkling 7 seconds.

Fan Coil Controlling Mode Setting(Only for 2 pipe)
(You can select the fan coil In control & Out of control.)

In power-on status, press about 7 seconds, and “XX X” will display on the bottom of the screen, then continue to pressagain, and “F00” or “F01” will display.

Press to choose “F00” or “F01”
In “F00” mode, when room temperature reaches the set temp, the fan coil stops working. In “F01” mode, when room temperature reaches to the set temp, the fan coil goes on working.

Installation Instruction

This product is suitable for a standard 80*80mm wall box.

  1. Connect the line of power and valve into the terminals. Fix the wall plate into the wall box by a screwdriver.
  2. Connect the lines with the LCD board.
  3. Connect the LCD board into the wall plate.
    NOTICE: The installation wire should be 1.5-2.5mm .2

ATT:
Thank you for buying this product!
Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, please feel free to contact us.

In the box you will find:

Model TOL43-AC
Thermostat
User Manual
Screws

Our Service:
We offer a warranty of 24 months from the sales day. During the warranty, if it belongs to a quality issue, we will fix or replace them for you for free after testing them.
If it is not a quality problem or beyond the warranty time, we will charge for the after-sales service.

REFERENCE

Download Manual

BEOK TOL43-AC LCD Screen Thermostat Instruction Manual

BEOK TOL43-AC LCD Screen Thermostat Instruction Manual

wpx_thermostats

Recent Posts

Bremerhaven Casino No Deposit Bonus Codes For Free Spins 2026

Bremerhaven Casino No Deposit Bonus Codes For Free Spins 2026 The customer support team isnt…

2 days ago

Legal Casino Online

Legal Casino Online You must provide a mailing address and social security digits to complete…

2 days ago

Real Cash Online Casino United Kingdom

Real Cash Online Casino United Kingdom Mega Fortune is also a bit unusual in the…

2 days ago

Amex Casino United Kingdom

Amex Casino United Kingdom Instead of free spins, you do well and have winnings that…

2 days ago

Best Online Casino For Roulette

Best Online Casino For Roulette Time and Again is an HTML5 title, best online casino…

2 days ago

Fastest Payout Online Casinos

Fastest Payout Online Casinos Bally Wulff is known for their amazing classic slots and Back…

2 days ago