Thank you for your purchase. Please confirm that this product is suitable for your heating equipment before installation; *Before installation or maintenance, please make sure to keep the power off; *Please strictly follow the wiring diagram for wiring installation; *Installation to the wall, please confirm that the fasteners are suitable for this product; *Do not pull the cable too hard, otherwise the product will be damaged; *If a hard plastic wire is used in the installation process, it must be bent to an appropriate angle in advance; *Please arrange for professionals to install; *Please contact the after-sales service for equipment failure, please do not try to repair it yourself; * After installation, please refer to this manual to check again to ensure normal and safe use, and keep this manual properly. In the box you will find
BAC- 005 series Modern square Touch Screen Room Thermostats are designed to on / off control FCU the fans and valves in air conditioner applications via comparison of the room temperature and setting temp. As reaching the aim of comfort and saving energy.
On Appearance
On Functionality
WIRING
HOME QUICK REFERENCE
Adjusting/Setting the Programmable Schedules
WiFi version can be set in APP. Non-wifi version, Touch and hold “
Default settings for program schedule
Time display | MON.-FRI. (①②③④⑤ shows on screen) | SAT. (⑥shows on screen) | SUN. (⑦shows on screen) | |||
TIME | TEMP. | ON-TIME | TEMP. | ON-TIME | TEMP. | |
Period 1 | 6:00~8:00 | 20 | 6:00~8:00 | 20 | 6:00~8:00 | 20 |
Period 2 | 8:00~11:30 | 15 | 8:00~11:30 | 20 | 8:00~11:30 | 20 |
Period 3 | 11:30~13:00 | 15 | 11:30~13:00 | 20 | 11:30~13:00 | 20 |
Period 4 | 13:30~17:00 | 15 | 13:30~17:00 | 20 | 13:30~17:00 | 20 |
Period 5 | 17:00~22:00 | 22 | 17:00~22:00 | 20 | 17:00~22:00 | 20 |
Period 6 | 22:00~6:00 | 15 | 22:00~6:00 | 15 | 22:00~6:00 | 15 |
Setting the Functions and Options
When the power is off, press “
Before using your Wi-Fi thermostat for the first time,you must configure the Wi-Fi signal and settings through your smartphone or tablet, This will allow communication between your connected devices
EZ Mode
When the thermostat is off, press and hold the ” “until the thermostat screen flashes quickly and displays the ” ” icon, and then operate according to the following figure (Fig 2.4-Fig 2.7).
AP Mode
When the thermostat is off, press and hold the ” ” unt il the thermostat screen flashes slowly and the ” ” icon is displayed (if the ” ” icon appears, continue to press the ” ” until the thermostat screen Flashes slowly and displays the “ ” icon), and then operate according to the following figure (Fig 2.8-Fig 2.14). After connecting to this hotspot, return to the “smartlife”
APP operation interface description FCU thermostat
SIMPLE EXCEPTION HANDLING
No. | Phenomenons | Handling |
Power is on but without display. | * Check if the terminals between LCD panel and Power Unit Box is loosen. | |
Without output but display works. | * Use a new LCD panel or new Power Unit Box to replace the old one. | |
Room Temp. Is a little different from the actual. | *Do temperature calibration in item 1 of high senior options |
DOWNLOAD MANUAL
Becasmart BAC-005 Series Room Smart Thermostat User Guide
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…