Aprilaire

Aprilaire 3533 Digital Heat/Cool Thermostats User Manual

Aprilaire  3533 Digital Heat/Cool Thermostats

IMPORTANT: READ ALL INSTRUCTIONS THOROUGHLY

Introduction

Thank you for your recent Aprilaire® Electronic Thermostat purchase. We sincerely appreciate your business and are pleased to add your name to our growing list of customers. With this purchase, you have invested in the highest quality equipment currently available. Please be assured that in addition to product quality, we are committed to total product performance and complete customer satisfaction.
Now, please take a few minutes to familiarize yourself with your new Aprilaire Thermostat. Inorder to take advantage of all the benefits of your new thermostat, it is important that you understand how to operate it.

Aprilaire
Digital Heat/Cool Thermostat

Getting Familiar with the Aprilaire Thermostat

(refer to Figure 1)
The LCD (Liquid Crystal Display) normally shows: the room temperature, the current mode of operation, if the Day or Night temperature setting is being used, and if the system fan is set for continuous operation.
Temperature Display
Room temperature can be displayed in either degrees Fahrenheit or degrees Celsius. If the displayed temperature seems abnormally high or low (for example: 70˚F is equal to 21˚C), press the DECREASE button and INCREASE button simultaneously to switch between ˚F and ˚C.
Mode Button
Three modes of operation are available for all the Heat/Cool thermostat models: Heat, Cool, and Off. Additionally, with the Models 8534 and 8538, “AUtO” mode is available. The mode of operation indicates how you want your heating and cooling equipment to operate. Press the MODE button until the desired mode of operation shows on the display.
Temperature Settings – Day/Night Button
The thermostat stores four temperature settings in its memory, two for heating and two for cooling. The two temperatures for each mode are called the Day setting ” “ (a sun icon appears on the display) and the Night setting ““ (a moon icon appears on the display). The Day setting is intended to be an occupied or comfortable setting and the Night setting is intended to be an unoccupied or energy savings setting. For example the four settings stored in the memory of the thermostat might be as shown in Table 1. Pressing the DAY/NIGHT button allows you to instantly change to a more economical setting when leaving the house or going to bed, and to a comfort setting when returning home or waking up. This thermostat is equipped with accessory inputs which can be used to automatically switch between day and night set points; contact your installing contractor for more details.
Fan Button
The system fan will operate automatically during a heating or cooling cycle. If it is desired to run the fan continuously, press the FAN button, and a Fan “ “ icon will appear on the display.
Outdoor Button
This button will be made functional when the optional Aprilaire Model 8041 Remote Outdoor Sensor has been installed. It can then be used to find out the outdoor temperature from indoors. If the Model 8041Remote Outdoor Sensor has not been installed, two dashes “– –” will appear on the display when this button is pushed.

Setting Up The Aprilaire Thermostat

To ensure accurate temperature control, observe the following simple guidelines:

  • When the thermostat is operating, close the cover to allow proper air circulation over the temperature sensor.
  • Do not place anything which can give off warm or cool air, such as candles or portable humidifiers, near the thermostat.
  1. Adjusting the Heat Temperature Settings. There are two settings, the Day setting “ “ (a sun icon appears on the display) and the Night setting “ “ (a partial moon icon appears on the display). See Figure 2.
    • Press the MODE button repeatedly until HEAt appears on the display.
    • Press the DAY/NIGHT button until the “ “ icon (Day setting) appears on the display.
    • Use the DECREASE button and INCREASE button to adjust the setting.
    • Press the DAY/NIGHT button until the icon (Night setting) appears on the display.
    • Use the DECREASE button and INCREASE button to adjust the setting.
  2. Adjusting the Cool Temperature Settings. There are two settings, the Day setting “ “ (a sun icon appears on the display when this setting is being used) and the Night setting “ “ (a partial moon icon appears on the display when this setting is being used). See Figure 3.
  3. Press the MODE button repeatedly until COOL appears on the display.
  4. Press the DAY/NIGHT button until the “ “ icon (Day setting) appears on the display.
  5. Use the DECREASE button and INCREASE button to adjust the setting.
  6. Press the DAY/NIGHT button until the “ “ icon (Night setting) appears on the display.
  7. Use the
  8. DECREASE button and INCREASEbutton to adjust the setting.

Operating The Aprilaire Thermostat

  1. Select the mode of operation by repeatedly pressing the MODE button until the desired mode appears on the display. The heating and cooling system may be turned off by selecting the “OFF” mode. Do not set to the “OFF” mode during periods when freezing temperatures may occur.
    • COOL: In the “COOL” mode a Snowflake “ “ icon appears on the display, which flashes when the air conditioning is running.
    • HEAT: In the “HEAt” mode a Flame “ “ icon appears on the display, which flickers when the furnace is running.
    • AUTO (Models 8534 and 8538 only): In the “Auto” mode, the heating and cooling system will operate in either the “HEAt” or “COOL” mode depending on which current setting the room temperature is closest to. Note that both the Snowflake “ “ and Flame “ “ icons appear on the display.
  2. Select the temperature setting to be used by pressing the DAY/NIGHT button until the desired previously stored temperature setting (Day or Night) appears on the display. Use the DECREASE button and INCREASE button to change the temperature if desired (NOTE that if changed, the new set point will be permanently stored in memory – see CHANGING THE CURRENT TEMPERATURE SETTING).
  3. After approximately 5 seconds the thermostat will return to the normal display.
    Note: This thermostat utilizes time delays to protect the heating and cooling equipment. If the equipment does not shut off or turn on immediately when the temperature setting has been changed, it may be due to the built-in time delays (4 minutes max.).
  4. Press the Fan button, if it is desired, to run the fan continuously. A Fan “ “ icon will appear on the display when the fan is set to operate continuously

Changing The Current Temperature Setting

  1. Press and release either the DECREASE button and INCREASEbutton to see the current temperature setting. The setting, a Thermometer icon, and a Double Arrowhead icon will appear (see Figures 2 and 3 on pages 5 and 6).
  2. Change the temperature setting:
    • OPTION 1 – Use theDECREASE button and INCREASEbutton. Press and hold the DECREASE button or INCREASE button to change the current temperature setting. The thermostat remembers the most recent temperature settings. For example, if the Day, Cool temperature shown in Figure 3 were changed from 78˚F to 76˚F, the 76˚F setting would remain in memory as the Day, Cool setting.
    • Note: The Cool temperature setting must be a minimum of 2˚F higher than the Heat temperature setting for both the Day and Night sets. The thermostat will automatically update the setting not being changed. In the example above, if the Day, Heat setting was 75˚F, the thermostat would have automatically changed the setting to 74˚F when the Cool setting was changed to 76˚F.
    • OPTION 2 – Use the DAY/NIGHT button. Press the DAY/NIGHT button to instantly change the temperature setting to one of the two settings stored in memory

Optional Feature – Locking The Keypad

If tampering with the thermostat is expected and unwanted, the keypad can be locked by changing the position of the Keypad Lock DIP switch (switch no. 2) from the factory set OFF position to ON. The DIP switches are located inside the thermostat on the circuit board. To access the DIP switches, refer to the Installation Instructions that came with the thermostat, or consult your contractor. In the locked position, only the following functions can be done:

  • The outdoor temperature button will display the outdoor temperature.
  • The thermostat will default to the Day setting.
  • The DECREASE button and INCREASEbutton will temporarily change the Day setting a maximum of ±6°F (±3° for Model 8533) for a period of 3 hours before the thermostat automatically returns to the Day setting.
  • If the thermostat does not respond when a button is pushed, it may be because the keypad has been locked. A Lock “ “ icon will appear when a button other than Outdoor is pushed if the keypad has been locked.

In Case Of Power Failure

This thermostat does not require a battery. If the power goes out, the display is blank. During the period that the power is off, the heating/cooling system will not operate. When the power is restored, the thermostat will default to the Day setting and the current mode of operation at the time of the power outage.
This thermostat is equipped with a continuous memory feature which does not require any battery. The thermostat will never lose the four programmed temperature settings regardless of the length of the power outage.
Cleaning
If the surface of the thermostat becomes dirty it can be cleaned with plain water or many non-abrasive household cleaners, such as glass cleaner. When using any cleaner be careful not to get any into the interior of the thermostat. Do not spray any cleaner directly onto the thermostat. Spray the cleaner onto a soft cloth and wipe the surface of the thermostat.

Limited Warranty

Your Research Products Corporation Aprilaire® Thermostat unit is expressly warranted for two (2) years from the date of installation to be free from defects in materials and workmanship. Research Products Corporation’s exclusive obligation under this warranty shall be to supply, without charge, a replacement for any thermostat which is found to be defective within a two (2) year period and which is returned, together with the date of installation, no later than thirty (30) days after said two (2) year period by you to either your original supplier or to Research Products Corporation, Madison, Wisconsin 53701.
THIS WARRANTY SHALL NOT OBLIGATE RESEARCH PRODUCTS CORPORATION FOR ANY LABOR COSTS AND SHALL NOT APPLY TO DEFECTS IN WORKMANSHIP OR MATERIALS FURNISHED BY YOUR INSTALLER AS CONTRASTED TO DEFECTS IN THE THERMOSTAT ITSELF.
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE AFORESAID TWO-YEAR PERIOD. RESEARCH PRODUCTS CORPORATION’S  LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OTHER THAN DAMAGES FOR PERSONAL INJURIES,  RESULTING FROM ANY BREACH OF THE AFORESAID IMPLIED WARRANTIES OR THE ABOVE-LIMITED WARRANTY IS EXPRESSLY EXCLUDED. THIS LIMITED WARRANTY IS VOID IF DEFECT(S) RESULT FROM FAILURE TO HAVE THIS  THERMOSTAT INSTALLED BY A QUALIFIED HEATING AND AIR CONDITIONING CONTRACTOR. IF THE LIMITED WARRANTY IS VOID DUE TO FAILURE TO USE A QUALIFIED CONTRACTOR, ALL DISCLAIMERS OF IMPLIED WARRANTIES SHALL BE EFFECTIVE UPON INSTALLATION.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

The Aprilaire® Total Indoor Air Comfort System is an integrated group of air quality enhancement products designed to work with your heating and cooling system to make your home more comfortable. For the best in indoor air quality, ask your heating and cooling contractor about these fine Aprilaire products, or visit us at www.aprilaire.com for your Indoor Air Solutions.

Automatic Humidifier
The Best Cure For Dryness® The world’s first computer-equipped, completely automatic humidifier.
High-Efficiency Air Cleaner
Nobody Makes Clean Air Easier®
The economical, trouble-free, high-efficiency air cleaner for your home.
Fresh Air Exchanger
Only The Freshest Homes Have April Air™ Your best value for a constant, controlled supply of fresh air with energy recovery.
Zone Control System
Custom Comfort Throughout Your Home®
The most reliable way to achieve temperature control in every area of your home.
Electronic Thermostat Energy Efficiency Never Looked So Good™
Ultra-thin, easy-to-use programmable or digital controls featuring pinpoint accuracy.

P.O. BOX 1467 • MADISON, WI 53701-1467 Products For Better Indoor Air Quality

REFERENCE:

DOWNLOAD MANUALS:

Aprilaire 3533 Digital Heat-Cool Thermostats User Manual

Aprilaire 3533 Digital Heat/Cool Thermostats User Manual

wpx_thermostats

Recent Posts

Johnson Controls T7000e LCD Digital Thermostat Installation Guide

Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide

1 year ago

Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’S GUIDE

Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE

1 year ago

Hetta HS01RF WIRELESS THERMOSTAT KIT USER MANUAL

Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…

1 year ago

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat USER MANUAL

HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…

1 year ago

Honeywell RLV450 PROGRAMMABLE THERMOSTAT USER GUIDE

Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…

1 year ago

Honeywell RLV431 Programmable Thermostat User Guide

Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…

1 year ago