A tool for regulating and managing temperature in a variety of situations is the Alex XH-W3001 Digital Temperature Control Thermostat. It is frequently used in greenhouses, incubators, heating and cooling systems, and other temperature-sensitive situations. The thermostat has simple controls and a digital display that make programming and adjusting temperature settings simple. It makes use of a temperature sensor to gauge the surrounding air temperature and a relay to manage any connected heating or cooling units. With configurable setpoints and hysteresis settings to maintain a stable temperature range, the XH-W3001 provides accurate temperature control. It is small, dependable, and frequently utilized for both domestic and professional needs. The thermostat is a popular option among customers looking for efficient temperature management solutions because of its user-friendly interface, precise temperature readings, and dependable performance.
| Product Name | Temperature Controller |
| Model | XH-w3001 |
| Supply voltage | DC12V,220v.24v |
| Temperature range | -50 ° C ~ 100 ° C |
| Detection probe | integrated sensor |
| Net weight | about 60g (including sensor) |
| Appearance size | 60*45*31mm |
High-definition display design, a one-button operation button
Tip: for power supply of 12V / 24V W3001, transformer or 12V / 24V output DC power supply can be used
Note: w300 is a direct output, so do not power on when the output end is not connected with the load, so as to prevent two-stage contact of wires and ignition.
What is the direct output?
Warm tip: the output and input voltage of this thermostat are synchronous, that is, when the thermostat is in a working state (the indicator light is on), the direct output voltage is as much as the input voltage. When the thermostat is in intermittent operation (the indicator light is off), there will be no voltage output at the output terminal
There is an output at the output end of the bright surface of the indicator light The indicator light is off, indicating that there is no output at the output end.
Initialize: Temperature To see the beginning temperature, simply press the up key once. The initial temperature number flashes after roughly three seconds of pressing Chang’an’s up key. Using the up and down keys, you may set the desired temperature.
Set stop temperature: To show the stop temperature, press the down key once. The stop temperature number flashes after you press the down key for around three seconds. Using the up and down keys, you may set the desired temperature.
Restoring the factory: Press and hold the up and down keys simultaneously while the setting is turned on to see the Nixie tube display 888 and then automatically jump to the detection temperature, or return to the factory setting.
The start and stop temperatures are necessary settings. (The application detects that the working mode is heating mode automatically)
Setting technique:
When you long press the up button, the start temperature flashes, and you may use the up and down buttons to adjust it. To stop the temperature flashing, long press the down key, and use the up and down keys to adjust the stop temperature value.
Use case: Control the water heater to turn it off when the temperature hits 65 °C and on again when it decreases to 50 °C. How is it set?
A common thermostat for controlling temperature in numerous applications is the Alex XH-W3001 Digital Temperature Control Thermostat. Here is a little tutorial on using it:
The Alex XH-W3001 Digital Temperature Control Thermostat is what it sounds like.
A common digital thermostat for temperature control in heating and cooling systems is the Alex XH-W3001.
The Alex XH-W3001 Digital Temperature Control Thermostat serves what purpose?
By turning the heating or cooling system on or off in response to temperature readings, the Alex XH-W3001 is intended to regulate and control the temperature in a particular space. The Alex XH-W3001 Digital Temperature Control Thermostat’s operation is described. The thermostat measures the outside temperature using a built-in temperature sensor. In order to keep the set temperature, it compares the measured temperature to the desired setpoint and provides instructions to the associated heating or cooling system.
Can you use the Alex XH-W3001 for both cooling and heating systems?
Depending on the application and setup, the Alex XH-W3001 can be utilized with both heating and cooling systems.
What temperature range is the Alex XH-W3001 Digital Temperature Control Thermostat capable of supporting?
The Alex XH-W3001’s operating temperature range is normally -50°C to 110°C (-58°F to 230°F), while the precise range may vary based on the model and configuration.
Does the Alex XH-W3001 have a feature that can be programmed?
The Alex XH-W3001 is a straightforward thermostat without programmable features, thus no. It works by manually adjusting the temperature that has been set.
Can I use a multi-zone heating or cooling system with the Alex XH-W3001?
The Alex XH-W3001 is not expressly made for multi-zone systems; rather, it is primarily intended for single-zone applications.
Does the Alex XH-W3001 support connectivity or remote control functions?
The Alex XH-W3001 does not offer connectivity or remote control features. It is a stand-alone thermostat that needs to be adjusted by hand.
What kind of power source is necessary for the Alex XH-W3001?
Depending on the model, the Alex XH-W3001 commonly uses a 12V or 24V DC power source.
Can the Alex XH-W3001 be utilized for both domestic and professional purposes?
Yes, depending on the needs of the heating or cooling system, the Alex XH-W3001 can be utilized in both residential and commercial applications.
Are all HVAC systems compatible with the Alex XH-W3001?
Various heating and cooling systems, including electric heaters, water heaters, and refrigeration systems, are compatible with the Alex XH-W3001.
Are there any energy-saving features on the Alex XH-W3001?
No, the Alex XH-W3001 lacks sophisticated energy-saving capabilities. The control of temperature is its main objective.
Is installing the Alex XH-W3001 simple?
The Alex XH-W3001 installation is a fairly simple process. To ensure correct installation, it is advised to adhere to the manufacturer’s guidelines and, if required, obtain expert help.
Does the Alex XH-W3001 have a temperature display?
The Alex XH-W3001 does indeed have a digital display that shows the current room temperature, making it simple for consumers to keep track of the temperature.
Is there a warranty included with the Alex XH-W3001?
Depending on the manufacturer or distributor, the Alex XH-W3001’s warranty coverage could be different. Before buying the thermostat, it is a good idea to review the warranty terms and conditions.
Alex XH-W3001 Digital Temperature Control Thermostat User Manual
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…