Home Screen
Zones Screen
You can access common AirTouch features using the Quick Menu.
Inside the Quick Menu
Turn On/Off AC
Use the + and – buttons next to the zone names to increase or decrease the air flow in 5% increments
Your zone names are on the left of the home screen.
Efficiently make sure home doesn’t get too warm or too cold while no one is home
NOTE:
Only available on COOL, HEAT, or DRY Mode. When activated, the system will monitor the ambient temperature. When it approaches -1 of the upper limit (Cool) or +1 of lower limit (Heat), the system will turn On the AC. If the ambient temperature approaches -3 of the upper limit (Cool) or +3 of lower limit (Heat), the system will turn off.
The AC Timer function is useful for automatically switching the AC on or off at a given time.
Quick Timer
Setting the Quick Timer from the Home screen to Turn ON or OFF the Air Conditioning at a chosen time (up to 12 hours)
Turn ON Timer
To Set a Quick Timer to Turn On the Air Conditioning when the unit is currently off, Tap and Hold the Power Button and scroll to select your desired On Time. The On AC timer icon will appear below the power button.
Turn OFF Timer
To Set a Quick Timer to Turn Off the Air Conditioning when the unit is currently on, Tap and Hold the Power Button and scroll to select your desired Off Time. The Off AC timer icon will appear below the power button.
Remove Timer
Touch
A more advanced version of the Timer function is the Program function, letting you turn the AC ON or OFF and specify a Temperature for your entire house or airflow for individual zones for specific time and day ranges.
For high volumes of conditioned air in a single zone.
AirTouch’s Turbo Zone feature can cool or warm a single zone quickly; or can be useful when there is a lot of activity and you need more conditioned air than normal
If there is more than one system, multiple Turbo groups can be set.
The Turbo function cannot be programmed.
It is activated manually from the console when needed
AirTouch’s Favourites feature allows you to save your climate control scenarios.
Sleep comfortably while saving energy.
NOTE:
Only available on COOL, HEAT, or DRY Mode. When activated, the set point will increase (Cool mode) or decrease (Heat mode) by 1 degree every hour for 3 hours. But the displayed AC set point will remain at your chosen temperature. After three hours, the AC will remain at the decreased/increased set the point utill Sleep Mode is cancelled.
The AirTouch 2+ App can be downloaded free.
After downloading the application, follow the prompts to link to your AirTouch console.
AirTouch 2+ is compatible with:
NOTE:
If a mobile device is connected to the same WiFi network as your AirTouch 2+ , the app will automatically direct you to the control interface. Alternatively, if you are unable to access the control interface, you will be prompted for the AirTouch ID and password to continue. The AirTouch ID can be found in the Preferences section on the console.
When away from home the app will connect to AirTouch using your phones’ 3G or 4G connection.
The Screen Lock Protects your Air Conditioning and AirTouch from potential damage caused by children playing with the console
Owner’s Name is used by the mobile app to distinguish between AirTouch 2+ systems.
The maximum length for a name is 16 letters.
(Filled in by your installer)
Group | Group Name | Zones Included | Sensors | Turbo Function | Balance |
1 | |||||
2 | |||||
3 | |||||
4 | |||||
5 | |||||
6 | |||||
7 | |||||
8 | |||||
9 | |||||
A | |||||
B | |||||
C | |||||
D | |||||
E | |||||
F | |||||
G |
Connect AirTouch 2+ to a home WiFi network to enable the control/operation of the AC unit and zoning via local WiFi and internet.
Software Updates
Please make sure AirTouch 2+ is connected to the home WiFi network with internet access. If there is a red dot on the top right corner of the Quick Menu, a new software version is available for update. Follow the red dot and prompts to update the system.
Remote Internet Control
For remote AC control over the internet, ensure Internet Access is ticked under System Settings > Preferences.
Local Access Password Protection
When enabled, mobile devices connected to the same WiFi Network as AirTouch will need to use the set password to use the App.
Hotspot
If AirTouch doesn’t have access to the internet, you can still control it locally over WiFi with the AirTouch App by using the console as a WiFi Hotspot.
To setup AirTouch as a Hotspot, go to WiFi Settings, tick Enable Hotspot to turn it on and set a password which will also be used as the Local Access Password Protection password.
You can then connect your smart devices to this WiFi Hotspot to control AirTouch using the App.
Problem | Suggested Action |
LED in the lower right corner flashes quickly | No communication between the console and main module. Check if the AirTouch 2+ App is running and the wiring. Disconnect the cable to the touchscreen and connect it back. Or power off the main module of the AirTouch 2+ and power it back on in a minute. |
LED flashes slowly (Every one second) | AC has an error. Either AC is faulty or the communications between AC and AirTouch 2+ is lost. Call technician to further investigate. |
No LED light | No power to the console. |
Dampers have no response when turned on or off | Check if LEDs on the main module light up for relevant zones when the zone dampers are being turned On/Off. If Green/Red LEDs are not activated for the respective zone, the main module may be faulty, replace it. If there is response, there might be a faulty cable and the cable would have to be replaced. If the zone is still non-functional then there might be a faulty damper motor. Check if the cable from touch-pad to the main control module is faulty. If it is a faulty cable, then replace the cable. Check Grouping and find out if the right zones have been assigned to the right groups and have been turned ON/OFF in Zoning section. |
Electrical Requirements
Environmental Requirements
WARNING
Zone Output
Transformer
Liability and Disclaimer
All specifications and procedures are correct at time of publication but are subject to change without notice. Please read the instructions before installing this Zone Control System. Polyaire Pty Ltd does not accept any responsibility for loss or damage that may occur as a result of the incorrect installation or operation of this AirTouch Control System.
Polyaire Pty Ltd
© Polyaire Pty Ltd 2020
Like us on Facebook at ‘facebook.com/meetAirTouch
Download Manual
Airtouch 2+ Smart Air Conditioning Thermostat User Manual
Johnson Controls T7000e LCD Digital Thermostat Johnson Controls T7000e LCD Digital Thermostat Installation Guide
Honeywell T8635L Microelectronic Communicating Programmable Thermostat Honeywell T8635L Microelectronic Communicating Programmable Thermostat USER’s GUIDE
Hetta HS01RF WIRELESS THERMOSTAT Kit PAIRING INSTRUCTIONS Insert batteries into the Thermostat. Ensure that the…
HEAT-MAT NGT-567-0010 Underfloor Heating Thermostat Menu Introduction The NGT thermostat can switch your underfloor heating…
Honeywell RLV450 PROGRAMMABLE THERMOSTAT READ BEFORE INSTALLING DESCRIPTION * LP appears only for the first…
Honeywell RLV431 Programmable Thermostat Description The RLV431 thermostat can be used to control an electric…