Tag: Thermostat Installational Manual
-
PECO T372P Thermostat Installational Manual
PECO T372P Thermostat INSTALLATION MANUAL Thermostat Applications Guide Power type Battery Power Hardwire (Common Wire) Hardwire (Common Wire) with Battery Backup Wall locations The thermostat should be installed approximately 4 to 5 feet above the floor. Select an area with average temperature and good air circulation Do not install thermostat in locations: Close to hot…
-
SunStat 108101 Relay C3 Thermostat Installational Manual
SunStat 108101 Relay C3 Thermostat Installation and Operation Manual Features: Extend the area controlled by a SunStat Connect, Command or Core thermostat Control up to 15 Amps of electric floor heating Use with 120 or 240 VAC electric heating systems Built-in GFCI Status Lights Up to 10 Relay C3’s per thermostat Three-Year warranty Warning Please…
-
EMOS P5683 Manual Thermostat Installational Manual
EMOS P5683 Manual Thermostat Surface Mount Thermostat Properties surface mount thermostat with display, designed for mounting onto pipes; simple mounting using a tension spring; 5–80 °C temperature range (0.1 °C resolution); simple electrical connection using screwless terminals. Specifications Switched load: max. 230 V AC; 5 A for resistive load; 1.5 A for inductive load Power…
-
EMOS P5660SH socket Thermostat Installational Manual
EMOS P5660SH socket Thermostat Thermostatic and Timer Socket This digital socket combines a switch socket for timed activation/deactivation of home appliances with a thermostatic socket for automatic regulation of electrical heating and cooling systems (convector heaters, ladder radiators, infrared heating panels, air-conditioning). Technical Specifications Power supply: 230 V~, 50 Hz, 16 A max. IP rating:…
-
Pro1 Technologies Z260W Thermostat Installational Manual
Pro1 Technologies Z260W Thermostat Damper Module(s) The Damper Module is designed to operate with 24VAC 2-wire and 3-wire zone dampers. The Damper Module(s) must be hardwired with 24VAC connected to R and C. The zone damper will be connected to the NC, C, and NO terminals on the left side of the subbase. The Master…
-
Pro1 Technologies T501ML2 Thermostat Installational Manual
Pro1 Technologies T501ML2 Thermostat Installation Steps Disconnect electrical power at main fuse or circuit box. Remove Thermostat Cover from the thermostat base. Place the wall cover plate on back of the thermostat base, then connect wires to the thermostat as shown in wiring diagram (Without pushing on knob or triangular bimetal element). Push lead wires…