SALUS WQ610RF THERMOSTAT Installation Guide

Contents hide

1 SALUS WQ610RF THERMOSTAT

2 Introduction

2.1 Product compliance

2.2 Safety Information

2.3 Package Content:

3 Quantum thermostat SQ610RF/ WQ610RF charging

3.1 Installation of the Quantum charging dock

4 Technical Informations

5 Reference

SALUS WQ610RF THERMOSTAT

Introduction

Charging dock device is provided for SALUS Quantum thermostat SQ610RF/ WQ610RF battery charging by mini USB port. It is designed only for this thermostat. The time period for full Quantum Li-on battery charging is 24 hours. Quantum thermostat SQ610RF/ WQ610RF is sold separately!

Product compliance

EU Directives: LVD 2014/35/EU, RoHS 2011/65/EU. Full information is available on the website www.saluslegal.com

Safety Information

Use in accordance to national and EU regulations. Use the device as intended, keeping it in dry condition. Product for indoor use only. Installation must be carried out by a qualified person in accordance to national and EU regulations. Disconnect your equipment before cleaning it with a dry cloth.

For indoor use.
The device should not be used by people with: sensory or mental pro-blems, without experience, insufficient knowledge and also children.
Use with provided 230V power adapter only.

Package Content:

Charging dock
Power supply 230V plug
1,5m white USB cable
Short instruction

Quantum thermostat SQ610RF/ WQ610RF charging

Take the device out of the box and make sure it is ready to work (remove the foil etc.)
Apply Quantum thermostat to the charging dock from the up side. Look at the picture below:
The thermostat began to charge. The time period for full Quantum Li-on battery charging is 24 hours. New SQ610RF/WQ610RF Quantum Thermostat is partially charged, however, we recommend you to fully charge the battery before use.

Installation of the Quantum charging dock

Use power supply plug and USB cable included. Put it in to the Micro USB input in the charging dock and then connect it to the 230V. It will begin to charge the thermostat. Please charge the thermostat for 24 hours before the first use.

Technical Informations

Power supply	230V AC
Charging current	1A
Storage temperature	from -20°C to 60°C
Operating temperature range	from 0°C to 45°C
Dimension [mm]	82 x 82

SALUS-RT520-THERMOSTAT-3

DISTRIBUTOR OF SALUS CONTROLS:
QL CONTROLS Sp. z o.o., Sp. k. Rolna 4,
43-262 Kobielice,
Poland

IMPORTER:
SALUS Controls Plc Units 8-10 Northﬁeld Business Park Forge Way, Parkgate, Rotherham, S60 1SD
United Kingdom

www.salus-controls.com
SALUS Controls is a member of the Computime Group.
Maintaining a policy of continuous product development SALUS Controls plc reserve the right to change speciﬁcation, design and materials of products listed in this brochure without prior notice. SALUS-RT520-THERMOSTAT-1