Honeywell Home DC6000WF D6 Pro Comprehensive
Display sleep
The controller goes into Display sleep (the screen is dim) after 45 seconds of inactivity. Press o to wake up the controller. This button push does not change temperature or settings.
Room temperature
Any time the controller is not being interacted with, the current room temperature is displayed on screen.
Viewing set temperature
Be sure the controller is not in Display sleep, then press + or – once to view the current set temperature. The set temperature will “pulse” on screen. After a short period of time the screen will change to display the room temperature.
Change temperature
- Be sure the controller is not in Display sleep, then press + or – more than once to change the set temperature so it is higher or lower in the current mode.
- Stop pressing + or – when you reach the temperature you want.
- The screen will pulse and then return to the room temperature display.
Change mode
- Be sure the controller is not in Display sleep, then press o to change the system mode.
- Stop pressing o when you reach the mode you want. The ductless unit will beep when it gets a command from the controller.
This product is manufactured by Resideo Technologies, Inc., Golden Valley, MN, 1-800-633-3991. © Resideo Technologies, Inc. The Honeywell Home trademark is used under license from Honeywell
International Inc. All rights reserved.
Resideo Inc., 1985 Douglas Drive North, Golden Valley, MN 55422
www.resideo.com
33-00388—05 M.S.
Rev. 09-19 | Printed in the United States
References:
Download Manual
Honeywell Home DC6000WF D6 Pro Comprehensive Quick Guide
OTHER MANUAL
Honeywell Home DC6000WF D6 Pro Smart Ductless Controller Installation Guide
Honeywell Home DC6000WF D6 Pro Comprehensive Compatibility Chart
Leave a Reply