Tag: SCHNEIDER
-
SCHNEIDER ELECTRIC TC300 Thermostat Installation Instructions
SCHNEIDER ELECTRIC TC300 Thermostat Features Modern appearance Large, blue backlit, LCD screen Eco button for energy saving Real-time display Button lockout function controls the unauthorized operation Non-volatile memory (EEPROM) retains user settings during power loss Low-temperature protection Standard 86×86 mm box for installation Alert function facilitates temperature sensor maintenance Optional Modbus communication Deluxe models include:…
-
SCHNEIDER ELECTRIC SE8650 Thermostat User Guide
SCHNEIDER ELECTRIC SE8650 Thermostat Safety Information IMPORTANT INFORMATION Read these instructions carefully and inspect the equipment to become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or to call attention to information…
-
SCHNEIDER ELECTRIC SE7600F Thermostat Installation Guide
SCHNEIDER ELECTRIC SE7600F Thermostat INSTALLATION Inspection Remove the security screw on the bottom of the Terminal Equipment Controller cover. Open the unit by pulling on the bottom side of Terminal Equipment Control-ler (Figure-1). Remove the wiring terminals from the sticker. Please read the FCC ID and IC label installed in the cover upon removal of…
-
SCHNEIDER ELECTRIC SE7200 thermostat Installation Guide
SCHNEIDER ELECTRIC SE7200 thermostat INSTALLATION Preparation Remove the security screw on the bottom of Terminal Equipment Controller cover. Open unit by pulling on the bottom side of Terminal Equipment Controller (Fig. 1). Remove wiring terminals from sticker. Please read the FCC ID and IC label installed in the cover upon removal of cover for the…
-
SCHNEIDER ELECTRIC MN-S1 Thermostat Instruction Guide
SCHNEIDER ELECTRIC MN-S1 Thermostat Application I/A Series MicroNet Sensors are wall-mounted digital temperature and humidity sensors for use with I/A Series MicroNet Controllers. These sensors feature a Sensor Link (S-Link) communication protocol that provides a simple two-wire interface for power and exchange of sensor and subbase information. Available in twelve models, these I/A Series…