Danfoss Icon2 RT Room Thermostat
Wake up the thermostat
Touch the screen – the actual room temperature is displayed (fig. A).
The Heating icon is displayed if the heat is on, and the Cooling iconis displayed if the cooling is on.
The screen turns off after 10 seconds.
Set the temperature
Wake up the thermostat. Touch to set the temperature (temperature flashes to indicate setting in progress).
Touch to confirm the new setting.
Wake up the thermostat. Touch and hold to open the menu (fig. B).
Toggle the menu with confirm with .
Touch to go backward in the menu.
- : Temperature limitation, i.e. allowed setting range for room temperature.
- : Product ID – your product can be identified with this code.
- : Perform Link Test, if the thermostat has been moved. Check the signal, a result of 80 % or more equals a”strong connection”.
- : Set min. and max. temperature of the floor surface (the menu is only displayed, if your thermostat has a floor sensor).
Note! Menus 4, 6 and 7 are only available to the installer
REFERENCE
Download Manual:
Danfoss Icon2 RT Room Thermostat User Guide
other manuals:
Danfoss Icon2 RT Room Thermostat Data Sheet
Leave a Reply