Danfoss Icon2 RT Room Thermostat
Installation
Follow the illustrations in fig. 1 to 6 (dismantling, see fig. 7).
Note, fig. 3: Thermostats can be wired in either BUS or Star configuration, see Master Controller Installation Guide for more information.
Note, fig. 8: Optional floor sensor requires use of electrical conduit!
Touch and hold
to access the Settings Menu. In the Settings Menu, touch and holdto access the Installer Menu.
: Range limitation of setpoint for room temperature.
: Info/version number, can be used to identify the product.
: Perform Link Test of connection with Master Controller. Returns result as 0-100% (80% or higher is a very strong connection).
: Floor sensor mode:
= Comfort mode. Both air- and floor sensor is used.
= Floor sensor mode. The end user sets desired floor temperature.
= Dual mode. The thermostat controls a radiator and floor heating circuit(s). Floor heating circuits assure min. floor temperature and the radiator is used for peak load.
: Min. and max. temperature for the floor, used in and mode.
: Reference Room. Set to ON, if you want this thermostat to be the reference thermostat for switching between cooling and heating.
: Cooling ON/OFF. Use to turn of the ability to cool, e.g. bathrooms.
REFERENCE
Download Manual
Danfoss Icon2 RT Room Thermostat Installation Guide
other manuals
Danfoss Icon2 RT Room Thermostat User Guide
Danfoss Icon2 RT Room Thermostat Data Sheet
