Verdant -V8-BB-7S -Programmable -Thermostat-PRO - Copy

Verdant V8-BB-7S Programmable Thermostat Insruction Manual

verrdant-logo

Verdant V8-BB-7S Programmable Thermostat

Verdant -V8-BB-7S -Programmable -Thermostat-PRO

INSTALLATION

Mounting the Thermostat to the Wall

  • Remove the old thermostat from the wall and disconnect wires from the old thermostat.
  • Using the wire connectors provided, connect the wires to your new thermostat.
  • The thermostat wires are not polarized and can be connected to either of the two (2) wires from the electric box in the wall
  • Mount your new thermostat to the wall using the supplied mounting screws. Use either the two holes on the right or the left side depending on the desired positioning.
  • Plug four (4) mounting-screw holes with supplied screw covers.
  • If you wish, apply the supplied instructions sticker onto the left thermostat panel

Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 1

INTRODUCTION

Control Buttons Overview
Verdant intuitive user interface uses several control-buttons to access all features and menus of the thermostat. Please familiarize yourself with control buttons as they will be referenced in the rest of this manual to explain the thermostat operation.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 2

Main Screen Overview
Large LCD screen with on-demand back-light clearly display current ambient temperature, time, day and heating control parameters at all times

Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 3

CONFIGURATION

Thermostat Modes

Thermostat Modes Description
Verdant thermostat can be used as a 7-day programmable thermostat or a simple-to-use non-programmable thermostat. Programmable thermostat mode allows pre-programming up to four (4) automatic temperature changes (events) for each day of the week. Non-programmable thermostat mode allows turning the thermostat into a simple-to-use thermostat with only basic temperature control options.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 3

Changing the Thermostat Mode
To switch between “Programmable” and “Nonprogrammable” thermostat mode: Press and hold the Program button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 12 ] and the Home/Mode button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 13 ] for four (4) seconds until the thermostat mode changes. Energy-saving occupancy detection is available in both “Programmable” and “Nonprogrammable” thermostat mode.

Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 4

Equipment Modes

Equipment Modes Description
Verdant thermostat has two (2) distinctive equipment modes for operating different kinds of heating equipment. Select the “Radiant” operation mode if you are using the thermostat to control an electric baseboard or radiant heater. Select the “Fan Forced” operation mode if you are using the thermostat to control a convertor heater with a built-in fan.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 5

Changing the Equipment Mode
To switch between “Radiant” and “Fan Forced” equipment modes:Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 8

Maximum Temperature Setting

Maximum Temperature
You can limit the maximum temperature that can be selected using thermostat temperature control options. The maximum setpoint setting will limit the maximum setpoint that can be selected with any of the thermostat temperature control options, including Program Settings. NOTE: Changing maximum setpoint will not affect existing temperature setpoints in the Program Settings

Setting the Maximum Temperature
Press and hold the Program button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 12 ] and the Temperature Up button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 13 ] for four (4) seconds until the Maximum Temperature screen appears. Use the Temperature Up and Down buttons [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 14 ] to select the maximum setpoint (61 – 91°F / 16 – 33°C). Press the Home/Mode button [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 15] to confirm your selection and return to Home screen.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 11

Temperature Display Units

Changing the Temperature Display UnitVerdant -V8-BB-7S -Programmable -Thermostat-PRO - 16

To switch between °F and °C display:

  • Press and hold the Program button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 12 ]. While holding the
  • Program button [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 12], press the Time Forward button [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 12].Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 17

USING THE THERMOSTAT

Temperature Control ModesVerdant -V8-BB-7S -Programmable -Thermostat-PRO - 28

Temperature Control Modes Description

  • Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 20AUTO Temperature Control mode initiates a custom temperature control program.
  • To set up a custom temperature control program refer to the Program Settings section.
  • Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 21HOLD Temperature Control mode maintains the room temperature at a selected temperature setpoint

Changing the Temperature Control ModeVerdant -V8-BB-7S -Programmable -Thermostat-PRO - 29

To change the temperature control mode:
Press the Home/Mode button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 15 ] to switch betweenVerdant -V8-BB-7S -Programmable -Thermostat-PRO - 20 andVerdant -V8-BB-7S -Programmable -Thermostat-PRO - 21 temperature control modes.

Temperature Setpoint

Changing the Temperature SetpointVerdant -V8-BB-7S -Programmable -Thermostat-PRO - 25 Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 28

To change the temperature setpoint:
Use the Temperature Up and Down buttons [  Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 14 ] to raise or lower the temperature setpoint Changing the setpoint in AUTO mode will only change the setpoint until the next event start. In this situation, “Temporarily Set to” screen indicator will indicate that the temperature setpoint will change when the next event starts.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 26

Time and Day Settings

  • Use the Time Forward and Time Back buttons [ and ] to set time and day. The longer you hold the Time Forward and Time Back buttons [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 30] the faster the time and day setting will move.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 29
  • Press the Home/Mode button [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 15] to confirm the time and day and to return to the Home Screen.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 31

Program Settings

Accessing the Program Settings Screen
The Program Settings feature allows you to program automatic temperature changes to fit your schedule and reduce energy consumption. You can customize the program with up to four (4) temperature changes (events) for each day of the week. Press the Program button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 12 ] to access the Program Settings screen. Press the Program button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 12 ] again to advance to the next event you wish to program.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 32

Modifying the Event Settings

  • Use the Time Forward and Time Back buttons [  Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 30] to select the start time for the event.
  • Use the Temperature Up and Down buttons [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 14] to select the temperature setpoint for the event.
  • Press the Program button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 12 ] to advance to the next event you wish to program. Repeat steps 1 – 3 to program settings for other events.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 33

Program Settings

  • If you choose to modify settings for a different day of the week, the thermostat will prompt you to copy the previously modified day settings to the newly selected day.
  • Press the “YES” button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 35 ] to copy the program settings. Press the “NO” button [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 36] to modify the program settings for the selected event.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 34
  • If you choose to copy the program settings, settings for all events from the previously modified day will be copied to the newly selected day.
  • The thermostat will automatically prompt you to copy the settings to the following day.
  • If you select “No”, repeat steps 1 – 3 to modify program settings for the selected event. Repeat the described procedure to program temperature changes for the whole weekVerdant -V8-BB-7S -Programmable -Thermostat-PRO - 37

Energy-Saving Occupancy Detection
Built-in occupancy sensor enables advanced energy saving features that allow incrementally adjusting the temperature when the room is unoccupied, whether you are in AUTO or HOLD temperature control mode. You can start saving the energy only minutes after the room becomes unoccupied as well as completely eliminate unnecessary energy consumption if the room remains unoccupied for longer periods of time.

Short Vacancy Setting
Short Vacancy Setting allows reducing the temperature setpoint by a selected number of degrees, if the room is unoccupied for a selected number of minutes.

Long Vacancy Setting
Long Vacancy Setting allows reducing the temperature setpoint to a selected temperature, if the room is unoccupied for a selected number of hours

Accessing Occupancy Detection Settings
Hold the Home/Mode button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 15 ] for four (4) seconds to access the Energy-Saving Occupancy Detection Settings.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 38

Energy-Saving Occupancy Detection

Short Vacancy Settings

  • Use the Temperature Up and Down buttons [  Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 14] to select a number of minutes (00-99) room needs to be unoccupied before the thermostat reduces the temperature setpoint. Selecting “00” as the number of minutes will disable Short Vacancy feature. Press the Home/Mode button [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 15] to confirm your selection and advance to the next configuration screen.
  • Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 39Use the Temperature Up and Down buttons [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 14] to select by how many degrees (0-10°F/0-5°C) you wish to reduce the temperature. Pressthe Home/Mode button [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 15] to confirm your settings and access the Long Vacancy settings.

Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 40Long Vacancy Settings

  • Use the Temperature Up and Down buttons [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 14] to select a number of hours (0-12) room needs to be unoccupied before the thermostat reduces the setpoint to the desired temperature. Selecting “0” as the number of hours will disable Long Vacancy feature. Press the Home/Mode button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 15 ] to confirm your selection and advance to the next configuration screen.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 41
  • Use the Temperature Up and Down buttons [ Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 14] to select the desired temperature. Press the Home/Mode button [Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 15 ] to confirm your selection and return to Home Screen.Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 42

Occupancy Detection Example

  • If the temperature setpoint is 72°F and the occupancy settings are the same as the examples shown on previous pages:Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 43

Short Vacancy Setting

  • If unoccupied 15 minutes
  • Reduce Temperature by 2;

Long Vacancy Setting

  • If Unoccupied 2 Hours Reduce Temperature to 64;
  • Then the following will happen……Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 44
  • if the room becomes unoccupied …Verdant -V8-BB-7S -Programmable -Thermostat-PRO - 45
  • if the room remains unoccupied
  • If the room is unoccupied for 2 hours, the thermostat will automatically reduce the temperature setpoint to 64°. when occupancy is detected

Warranty

Hardware
Verdant Environmental Technologies warrants the original end user (“Customer”) that new Verdant branded products will be free from defects in workmanship and materials and will perform in substantial conformance to its specifications, under normal use, for one (1) year from the original purchase date.

Exclusions
This warranty excludes (1) physical damage to the surface of the product, including cracks or scratches on the touch-screen or outside casing; (2) damage caused by misuse, neglect, improper installation, unauthorized attempts to open, repair, or modify the product, or any other cause beyond the range of intended use; (3) damage caused by accident, fire, power changes, other hazard, or Acts of God; or (4) use of the product with any device if such device causes the problem.

Exclusive Remedies
Should a covered defect occur during the warranty period and Customer notifies Verdant Environmental Technologies, Customer’s sole and exclusive remedy will be, at Verdant Environmental Technologies’s sole option and expense, to repair or replace the product. Replacement products or parts may be new or reconditioned or a comparable version of the defective item. Verdant Environmental Technologies warrants any replaced product or part for a period of ninety (90) days from shipment, or through the end of the original warranty, whichever is longer.

Obtaining Warranty Service
Customer must contact and return product to a local Verdant Environmental Technologies product dealer or installer within the applicable warranty period to obtain warranty service. Dated proof of original purchase will be required. Verdant Environmental Technologies will not be responsible for Customer’s memory data contained in, stored on, or integrated with any products returned to Verdant Environmental Technologies for repair, whether under warranty or not.

Warranty Exclusive
THE FORGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED BY VERDANT ENVIRONMENTAL TECHNOLOGIES AND ITS SUPPLIERS.

Disclaimer
NEITHER VERDANT ENVIRONMENTAL TECHNOLOGIES NOR ITS SUPPLIERS SHALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE OR USE OF THIS PRODUCT, WHETHER BASED IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR ANY OTHER THEORY, EVEN IF VERDANT ENVIRONMENTAL TECHNOLOGIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. VERDANT ENVIRONMENTAL TECHNOLOGIES’S ENTIRE LIABILITY SHALL BE LIMITED TO REPLACEMENT OR REPAIR OF THE PRODUCT

DIMENSIONS

  • Case: 5” x 5” x 1.25”
  • Screen: 1.75” x 1.875”

ELECTRICAL RATING

  • 2 Wire Non-Polarized

Minimum Load

  • 2A (resistive only)
  • 500W @ 240V AC
  • 250W @ 120VAC

Maximum Load

  • 12.5A (resistive only)
  • 3,000W @ 240V AC
  • 1,500W @ 120V AC

ACCURACY RATING

  • ±0.3°F (±0.15°C)

Verdant Environmental Technologies

Verdant products and software are protected by copyright, international treaties, and various patents including one or more of the following US patents: RE40,437; 7,232,075; 7,185,825; 7,156,318; 7,152,806; 7,145,110; 7,058,477; 7,050,026; 7,028,912; 6,902,117; 6,789,739; 6,786,421; 6,619,555; 6,581,846; 6,578,770; Other patents are registered or pending in the US and various countries around the world

REFERENCE

DOWNLOAD MANUAL

Verdant V8-BB-7S Programmable Thermostat Insruction Manual

verrdant-logo

Verdant V8-BB-7S Programmable Thermostat Insruction Manual

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *