Suqian Xinghe Electronic XH-W1308 Temperature Controller Digital Thermostat
Introduction
Suqian Xinghe Electronic created the cutting-edge yet user-friendly XH-W1308 Temperature Controller digital thermostat. For DIY projects at home or in the workplace, this small gadget offers a flexible solution for a range of temperature control applications. Users that have a digital LED or LCD display at their disposal can easily keep track of the temperature in real time. By turning connected heating or cooling devices on or off in accordance with the user-defined set points, the integrated relay output mechanism enables accurate temperature management. The thermostat is ideal for a variety of situations, from controlling the temperature of aquariums, greenhouses, and incubators to more specialized industrial applications. Its temperature range frequently ranges from below zero degrees to above 100 degrees Celsius.
The XH-W1308 is distinguished by its user-friendly interface. The user-friendly controls make it easy to choose between heating and cooling modes, calibrate the device, or adjust the set temperature. This controller has a wired temperature sensor to offer precise and reliable temperature readings, which is essential for situations where even a small temperature variation can have serious consequences. The XH-W1308 Temperature Controller Digital Thermostat from Suqian Xinghe Electronic stands out as an affordable yet very useful option, whether you’re a hobbyist searching for a trustworthy thermostat for a personal project or a professional in need of an effective temperature control solution.
Specification
Controller type | Amazon Alexa |
Item weight | 500 Grams |
Voltage | 12 Volts |
Control type | Button Control |
Usage
- Connect the gadget to the proper power source, often one that runs between 12V and 24V DC. Observe the polarity instructions listed on the device.
- Place the temperature probe where you wish to measure the temperature of the area. This is the placement of the temperature sensor (probe). Make sure it’s placed far from heat sources like the sun or any open flames that could cause erroneous readings.
- Link the output: Depending on whether the thermostat is set to heat or cool:
- Connect your heating appliance to the ordinarily open (NO) and common (COM) terminals of the relay.
- For cooling, join your cooling apparatus to the common (COM) and normally closed (NC) terminals of the relay.
- Set the Mode: Depending on the device, you may be able to alternate between heating and cooling modes. Pick the one that works best for your application.
- Set the Desired Temperature: To set the desired temperature, use the interface (buttons, dials, or touchscreen, depending on the model).
- The device’s hysteresis setting (if applicable) establishes the temperature difference at which it will restart the heating or cooling system. If the feature is available and required for your application, set this value.
- Establish the high and/or low temperature thresholds that will set off the alert if the gadget has alarm capabilities.
- Once everything is configured, monitor the gadget and the environment’s temperature. To keep the temperature where you want it, make adjustments as needed.
- Always check that the connected heating/cooling equipment is rated adequately for the relay’s current rating as a safety precaution. Make sure all connections are safe, and avoid overloading the equipment.
- Check the gadget and its connections from time to time for any signs of wear, damage, or malfunction. If you believe there are any errors or problems, you should replace the temperature probe or the complete device.
Features
- Digital Display: A display that shows the current temperature and possibly the set temperature.
- Relay Output: Usually used to turn on or off heating or cooling devices based on the temperature settings.
- Temperature Control Range: Defines the range within which the device can measure and control the temperature.
- Temperature Sensor/Probe: A wired probe that detects the current temperature.
- Adjustable Set Point: Allowing users to specify the desired temperature at which a connected device should activate.
- Cooling/Heating Mode Switch: Choose between controlling a heating device (like a heater) or a cooling device (like a fan or refrigeration unit).
- Hysteresis Setting: A setting to control the differential temperature range for turning devices on or off, to avoid rapid cycling.
- Power Supply Requirement: Specification for the necessary power input, often 12V or 24V for such controllers.
- Alarm Thresholds: Some controllers provide alert functions when temperatures exceed set high or low thresholds.
- Calibration Option: Allows for minor adjustments to ensure accurate temperature readings.
- Protective Functions: Features like short-circuit protection or overheat protection for safer operation.
FAQs
What is the primary function of the XH-W1308 Temperature Controller?
It’s designed to regulate temperature by controlling heating or cooling devices based on set temperature parameters.
What type of display does the XH-W1308 have?
It typically comes with a digital LED or LCD display to show the current temperature.
What’s the temperature control range of the XH-W1308?
While exact ranges may vary, many similar devices can control temperatures from -50°C to +110°C.
How is the desired temperature set on the controller?
Users can set the desired temperature using onboard buttons, and the set temperature is displayed on the digital screen.
Can the XH-W1308 be used for both heating and cooling applications?
Yes, many of these controllers can switch between heating and cooling modes.
What kind of temperature sensor does the XH-W1308 use?
It typically uses a wired temperature sensor, often a thermistor.
What power supply does the XH-W1308 require?
Many similar devices require a power supply in the range of 12V to 24V DC, though specific requirements might vary.
Does the XH-W1308 have an alarm function?
Some models come with high and low-temperature alarms, but you’d need to check the specific product details for the XH-W1308.
Can I calibrate the XH-W1308 if there’s a discrepancy in temperature readings?
Many of these controllers allow for temperature calibration to adjust any discrepancies.
How does the relay output function? A: Based on the set temperature, the relay can activate or deactivate a connected heating or cooling device.
Is the XH-W1308 suitable for aquatic or high-humidity environments?
This would depend on its IP rating and construction, but typically these devices are used in various environments, including aquatic setups.
How long is the temperature probe wire?
This can vary, but you’d need to check the product specifications for exact lengths.
Can the XH-W1308 save energy?
By efficiently regulating temperature and only activating devices when necessary, these controllers can contribute to energy savings.
Is there a warranty on the XH-W1308?
Warranty details would depend on the manufacturer and distributor.
How do I troubleshoot issues with the XH-W1308?
For troubleshooting, it’s recommended to refer to the product’s user manual or contact the manufacturer’s support.
Suqian Xinghe Electronic XH-W1308 Temperature Controller Digital Thermostat User Manual
Leave a Reply