SALUS RT510SR Wireless Programmable thermostat
Introduction
The RT510SR module will switch your appliance on or off in accordance with the temperature set by you. The completed RT510SR series consists of a transmitter – RT510TX thermostat and a Smart Relay SR868.
Product Compliance
This product complies with EMC 2014/30/EU, LVD 2014/35/EU, RED 2014/53/EU and RoHS 2011/65/EU. Full text of the EU Declaration of Conformity on www.saluslegal.com 868.0-868.6MHz; <13dBm
Safety Information
Use in accordance with the regulations. Indoor use only. Keep your equipment completely dry. Disconnect your equipment before cleaning it with a dry towel.
- Press for frost mode
- Press to enter / exit boost mode
- Press to enter/exit the permanent override
- Press to select setting
- Press 3 sec for holiday mode
- Increase button
- Decrease button
- Test Mode / Pairing Mode
- Press to confirm the setting
LCD icons
- Current day of the program
- Current Temperature
- Current time
- Temperature unit
- Temporary / Permanent Override
- Frost Protection
- Vacation Mode
- Heating Mode ON
- RF signal
- Low battery
- Boost Mode
- Program number
DIP switch settings
The DIP Switches can be found on the rear of your thermostat.
| Control feature | TPI | Span |
|
Operation |
When TPI is selected on DIP switch № 2, the DIP switch № 1 is functional. You can choose the Cycles Per Hour between a lower comfort level (6CPH) and a higher comfort level (9CPH). | When Span is selected on DIP switch № 2, the DIP switch № 1 is not functional. The temperature accuracy of your thermostat is set to ± 0.25 °C. |
LED indication Smart Relay
| LED State | Description | |
|
Red |
On | The relay is off. |
| Flash | The relay is in pairing mode. | |
|
Green |
On | The relay is on. |
| 2 x Flash | The relay is writing pairing code. | |
|
Red and Green |
Flash alternately | The relay is paired but lost link. |
| Flash in different sequence | It indicates the software version after reboot. | |
Installation – Step 1
- Electric heater
- Boiler
The thermostat and the smart relay are pre-paired from the factory if purchased as a pack. If not, follow thermostat pairing process.
Installation – Step 2
Pairing process
In case you want to add more than one relay, set all relays into pairing mode, including the ones already paired, and start the pairing process. The LED will flash red when the relay is in pairing mode.
Put the thermostat into pairing mode, by pressing the pair button for 3 seconds. After the smart relay is paired with the thermostat, the LED is steady red.
Test the pairing process
If the thermostat loses connection with the Smart Relay, the Smart Relay goes into fail safe mode after 30 minutes.
Setting hour and day
Continue with the same steps for setting the Day. Press Set to return to the Main Screen.
Temporary override
Permanent override
Setting programs
You can create personalized programs for your controller. You have the option to choose between a 5-2 days program or a daily one by using parameter d04 from Installer mode.
Press SET to change your programs.
Use 
and
to select Weekend/Weekday, press SELECT to confirm your option. Follow the same steps for setting the hour, minutes and temperature. After you have done all the changes, please press SET to confirm all your choices and to return to the Main Screen.
Installer mode
Press the three buttons together for 3 seconds. Use +Hr to select dxx parameter, or to change the parameter or to change parameter value and 
to confirm.
Parameter
| dxx | Function | Parameter | Default value |
| d01 | Temperature display increments | 0,1 or 0,5°C | 0,5°C |
| d02 | Temperature offset | ± 3,0°C | 0,0°C |
| d03 | Frost setpoint | 5,0 – 17,0°C | 5,0°C |
| d04 | Programmer selection | 5/2 or 24 hr (7d) | 52d |
FR/ NL / DE:
[email protected]
tel: +49 6108 8258515
Head Office:
SALUS Controls Plc
Units 8-10 Northfield Business Park Forge Way,
Parkgate, Rotherham S60 1SD,
United Kingdom
T: +44 (0) 1226 323961
E: [email protected]
E: [email protected]
SALUS Controls is a member of the Computime Group
Maintaining a policy of continuous product development SALUS Controls plc reserves the right to change the specification, design and materials of products listed in this brochure without prior notice.
For PDF Installation guide please go to www.salus-manuals.com
Issue date: 06 2020
Version: V004
REFERENCE
Download Manual:
SALUS RT510SPE Wireless Programmable thermostat Wiring Diagram
Other manuals
SALUS RT510SR Wireless Programmable thermostat Wiring Diagram
Leave a Reply