RUUD UHC-TST501CMMS Programmable Touchscreen Thermostat
Communication is the Key
Ruud is proud to introduce the 500-Series Thermostat as part of the most sophisticated and easy-to-use home comfort system available today. The Ruud Comfort Control System™ will provide improved comfort, optimal energy efficiency, and enhanced reliability and performance. The Comfort Control System™ consists of an indoor furnace or air handler, an outdoor condensing unit or heat pump, and the 500-Series Thermostat. The 500-Series thermostat auto-configures the system and constantly communicates with the indoor and outdoor heating and cooling components to provide the homeowner with the utmost in-home comfort and peace of mind. The thermostat is so smart; it can notify the homeowner when a service call is needed to any part of the complete system. These features ensure simple, dependable operation for the homeowner and easy installation by the contractor for peak performance
Features & Benefits
Contractor Benefits
- Multi-Purpose Thermostat–Setup, Control & Diagnostics
- Auto-Configuration–No Manual Settings Required in the Field
- System History–More Accurate Diagnostics
- Easy Installation–Requires only 4 wires *(2-wire kit available for quick hook-up retrofit applications)
- Diagnostic Messages (Service Access Space to Fault Codes)
- Blower Adjustment in Heat and Cool
- Programmable Fan
Homeowner Benefits
- Scrolling System Status
- Dehumidification Control
- Arm-Chair Programming
- Heat/Cool/Auto Change-over
- Outdoor Temperature Display
- Backlight On/Off
- Intelligent Scheduling Ramp-Up/ Program Anticipation
- Audio Notifications On/Off
- Air Filter, UV Lights & Humidifier
- Maintenance Reminder
- Temperature Offset
- Continuous Fan (Hi, Med, Lo)
Warranty
5 years from the date of installation (contact the Ruud Parts Distribution Center for more information).
Dimensions
- 5.9W [150 mm] x 4.6H [117 mm]
- x 1.2D [30 mm]
Thermal Specifications
- Setpoint Temperature Range: 45° to 99°F (7° to 32°C)
- Rated Differential: Heat 0.6°F; Cool 1.2°F
- Operating Ambient Temperature: 32° to 105°F (0° to 41°C)
- Operating Humidity Range: 90% non-condensing maximum
- Shipping Temperature Range: -4° to 150°F (-20° to 65°C)
Electrical Specifications
Rating
- Battery Power: mV to 30 VAC, NEC Class II, 50/60 Hz or D.C.
- Input-Hardwire: 20 to 30 VAC
- 1.0 Amp (load per terminal)
- 1.5 Amps maximum load (all terminals combined)
- Communicating Systems
- Multi-Stage gas, electric
- Multi-Stage heat pump
Programming
- Installer selectable system applications
- Universal – choice of 7 days, or nonprogrammable (installer selectable)
- 4 times and 4 temperature settings per program (2 setbacks) heat and cool, or
- selectable – 2 times and 2 temperature settings (1 setback)
- Energy savings of up to 33%
- Patented pre-programmed schedule simplifies time and temperature programming
Display
- Large 12-square-inch touchscreen display – largest in the industry
- Blue, lighted display for easier low-light viewing
- Larger, easy-to-read character size Extra-large touch keys for easy operation
- A clean, uncluttered touchscreen display provides easier navigation
Performance
- Selectable Energy Management Recovery
- Meets California Building Code, Title 24
- Easy-to-wire terminal block
- Compressor lockout protection
Comfort & Convenience
- Intuitive menu-driven set-up, programming, and operation, with an audio prompt to confirm touchscreen entries
- Permanent program retention during power loss
- Indefinite setpoint Hold or 4-hour temporary temperature override Auto heat/cool changeover option – automatically switches between heating and cooling programs
- Heating and cooling, heating only or cooling only configuration (installer selectable)
- Setpoint temperature “limited range” capable
- Filter change reminder
- Humidifier change pad reminder
- UV lamp maintenance
- Maintains room temperature to within +/- 1°
- The room temperature display can be recalibrated up to +/-4°
Terminal Designations
Thermostat System Matchups
Ruud Heating, Cooling, and Water Heating
P.O. Box 17010, Fort Smith, AR 72917 “In keeping with its policy of continuous progress and product improvement, Ruud reserves the right to make changes without notice.”
PRINTED IN U.S.A. 8-10 DC FORM NO. T22-001 REV. 7 Supersedes Form No. T22-001 Rev. 6
Reference
Download Manual:
RUUD UHC-TST501CMMS Programmable Touchscreen Thermostat PRODUCT SPECIFICATION GUIDE
RUUD UHC-TST501CMMS Programmable Touchscreen Thermostat PRODUCT SPECIFICATION GUIDE