Roma Heating CT1000 digital touch screen thermostat User Manual

Roma Heating CT1000 digital touch screen thermostat 

Roma Colour Touch Screen Thermostat

• This Thermostat is a digital touchscreen thermostat, which is designed for electric floor heating or water heating systems. Using the 4.3-inch color touch LCD display, the thermostat can be easily operated and understood. The thermostat is fully programmable to automate your heating or can be used in a simple manual mode.
• with five modes, these instructions will show you how to set your system to work in accordance with your lifestyle. This is done by pre-setting your preferred temperatures into the 5+ l + l days easy programmable function Simple regulation which sends commands to the heating the system according to a pre-selected temperature variation.
• The thermostat control algorithm also includes an anticipation function which reduces the discrepancy between the thermostat reading and the temperature at the center of the room.
• Choose from three (3) sensor settings: Air temperature, Floor temperature, and ambient (a combination of both air and floor sensors working together). Air is controlled through the built-in air temperature sensor and the floor is controlled via the included external floor probe.

Thermostat Features

• 4.3inch Colour Touch Screen Operation
• adjustable Screen Brightness For On And Sleep Modes
• electric Heating System (Max. 16A) or Water Heating System Max.3A)
• adjustable Comfort Mode, Economy Mode, Party Mode, Holiday
• Mode and Program Mode Control
•  5+1+1 Days Programmable settings
•  External and Internal Sensors
•  Clock and Day Display
• Temp. Calibration
• Temp. Protection
•  86′”86mm mounting

Technical Data

• Voltage 230V, 50/60Hz
• Load: 16A Max)
• Temp. Setting Range: 5 – 35s 0c
• Ambient :0 – 50°c
• Sensor: NTCIOK. 3950ohms at 25°c
• Accuracy: – 0.5 °c
• Protection Class: IP30

Screen and Display

l	ON/OFF Button	Use to turn on/ off the Thermostat
2	Mode Button	Use to Choose Working Mode
3	Menu Button	Use to Select Menu Settings
4	Down Button	Decrease Temp. or Other Parameters
5	Up Button	Increase Temp . or Other Parameters
6	Floor Temp.	Show Floor (External Probe) Temp.
7	Room Temp.	Show Room (Internal Air) Temp.
8	Set Temp .	Set Temp (Range: 5- 35°C)
9	Mode Icon	Show Current Working Mode
10	Time	Current Time & (Parameter Settings See PS)
11	Day Of Week	Show Current Week Day
12	Heating Icon	Will Show  When  Heating Is On/     Off
13	Date & Time Button	Set Weekday and Time
14	PRG . Program Schedule	Check 5+1+1 Days Heating Schedule
15	Pre-Set Mode Temps	Use to Pre-set Mode’s Working Temps
16	Language Select Button	Select language (EL Units Only)
17	Hi/    Low Protection Temp	Set Max/ MinTemps
18	Comfort Mode Button	Pre-Set comfort Mode Setting
19	Economy Mode Button	Pre-Set Economy Mode Setting
20	Party Mode	Pre-Set Party Mode Setting
21	Holiday Mode Button	Pre-Set Holiday Mode Setting
22	PRG. Mode Button	Pre-Set Programme Mode 5+l +l

Schedule Setting

Press the Menus Button, then press Mon-Fn Sat Sun you can then review the set weekly schedule. Touch a column to select and make any changes to the 5+ l+l day schedules. For example, if you want to edit the Sat. schedule, touch the Sat. column. You can then select each of the 6 time zones separately. Use or rill buttons to set time and temps for each zone.

1. In all columns, there are six periods. Using the green or rill button to select the periods. You can then change the periods selected, (the selected period is ticked like this).
2. After the period is selected, you can set the time, H = hours, M = minutes, and temperature by pressing the and rill buttons.
3. After the new schedule is set, simply press “APPLY” to save the new schedule.

Edit Date and Time

Press the Menu button, then press you can now edit the date & time with or buttons. Once set simply press” APPLY” to save the changes

Mode Pre-set Temp Settings

Press the Menu button, then press you can now pre-set the mode to working temps with the and buttons. Once set simply press ” APPLY” to save the changes

Max Temp Protection Settings

Press Menu, then press you can now select and enter your protection settings. Both high & low temps can be set using the « and » buttons. Once set simply, press “APPLY” to save the changes

High Protection: When set, the thermostat will turn the heating down /off automatically if the external floor temp (floor probe temp) exceeds the max set temp. This is important if any part of the floor or floor covering has a recommended max permittable working temp. low Protection: If set and when the thermostat is OFF, the thermostat will automatically turn the heating on if the air temp (internal Room temp) falls below the Low set temp. The low set temp will then be maintained until the thermostat is turned on. This is helpful to stop pipes from freezing and furnishings from being damaged by the cold.

Languages Select (EL Units Only)
Press the Menu button, then select the icon to enter the languages page. Select the language you want and press “APPLY” to save it.

Parameter Settings

Depending on how you want to use the thermostat, the parameter settings may need to be changed to suit your requirements. To view or change the Parameter Settings you must, Within 3 seconds after turning the thermostat OFF(bottom right-hand corner), press and hold the time (top left-hand corner of the screen), for 2 seconds. This will bring up the parameter setting pages. You can set the desired value by pressing “or “, and go to other pages by pressing “Pre” or “Next”. Once you have finished press the Home button to confirm settings and exit.

Menu	Description	Range
01	Temp. Offset	– 8°C – 8°C
02	Dead Zone	0 °c – 3°c
03	Set Point M ax.	5°C – 35°C
04	Set Point M in.	5 °c – 35°c
05	NTC (I = Air Temp E = Floo r Temp, l+ E = Ambie nt Temp)	I only. E only, I & E.
06	low Protection Max.	5°C – 10 ° C
07	Low Protection M in.	5°C – 10° C
08	High Protection M ax.	5 °C – 9 0 °C
09	High Protectio n M in.	5 °C – 90 °C
10	Backlight Off Time Afte r Operat ion	3s -180s
11	Backlight Brig htness W hen In Standby Status	1% – 10 0 %
12	Relay Delay Time	Os- 25Os
13	Relay Output	Normal(no) ; inverted( NC)
14	Restore Factory Settings.

Wiring Diagrams

Installation

Using a flat screwdriver carefully open the thermostat. (See Fig 1), connect the heating, power supply, and floor probe cables to the correct terminals tightly, (See Fig 2). Once wired fix the back plate to the wall securely through firing locations (See fig 3)

Dimension (mm)

REFERENCE:

Download Manual:

Roma Heating CT1000 digital touch screen thermostat User Manual

Roma Heating CT1000 digital touch screen thermostat User Manual