Ritetemp-8025-programmable-Thermostat-PRODUCT

Ritetemp 8025 Programmable Thermostat Operational Manual

Ritetemp-LOGO

Ritetemp 8025 Programmable Thermostat 

Ritetemp-8025-programmable-Thermostat-PRODUCT

Statement of use

The 8025 can be used with: most 24-volt gas, oil, or electric heating and air conditioning systems, single-stage heat pumps, or gas millivolt heating systems. It cannot be used with 120-volt heating systems or multistage heat pumps.

Ritetemp-8025-programmable-Thermostat-FIG.1

Configure

Set HEAT/COOL mode switch to HEAT or COOL. The unit will display the ambient temperature. Set the Fan switch to automatic.

Set Temp

Turn the Control Knob to increase or decrease the TARGET TEMP. The TARGET TEMP will be displayed when your are adjusting the temp. (The display will return to show the current ROOM TEMP in a few seconds).

Operate

Your thermostat is now in operation.
In the winter, set the HEAT-COOL Mode switch to HEAT to control your heating system.
In the summer, set the HEAT-COOL Mode switch COOL to control your air conditioner.
In spring and fall or when windows are open, you can set the HEAT/COOL Mode switch to OFF.
Setting the FAN Mode switch to AUTO automatically runs your system’s fan during heating and cooling.
Setting the FAN Mode switch to ON runs your system’s fan continuously even without heating or cooling.

Special Features

C/F Select

Centigrade / Fahrenheit selection. The C/F jumper is on the back of the thermostat control unit it determines which temperature system is displayed on the LCD display. .To change the oF / oC jumper. Separate the control unit from the wall-mounted terminals.Locate the oF / oC jumper.Select the desired display mode. .Press the internal RESET button and replace the control unit on the wall.

Low BatteryRitetemp-8025-programmable-Thermostat-FIG.2

When the batteries are low, the battery icon will come on and flash.The two AA Batteries in the unit need to be replaced. In some installations, your heater system will stop functioning when the thermostat loses power. Replace Batteries as soon as you see this warning. The thermostat setting will remain for 30 seconds while the batteries are removed and replaced.

Rear View of Unit

Ritetemp-8025-programmable-Thermostat-FIG.3

Customer Support: 888-515-2585
Visit our website www.ritetemp-thermostats.com

REFERENCE:

DOWNLOAD MANUALS:

Ritetemp 8025 programmable Thermostat Operational Manual

OTHER MANUALS:

Ritetemp 8025 programmable Thermostat Installational Guide

Ritetemp-LOGO

Ritetemp 8025 Programmable Thermostat Operational Manual


Posted

in

by

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *