REHAU-NEA-SMART-2.0-Room-Thermostat-FEATURED

REHAU NEA SMART 2.0 Room Thermostat Installation Guide

REHAU-NEA-SMART-2.0-Room-Thermostat-LOGO

REHAU NEA SMART 2.0 Room Thermostat 

REHAU-NEA-SMART-2.0-Room-Thermostat-PRODUCT

Product Information: NEA SMART 2.0 R-Module 230 V

The NEA SMART 2.0 R-Module 230 V is a wireless connection-type radio system that complies with Directive 2014/53/EU. The manufacturer of the product is REHAU AG + Co. The product requires professional knowledge equivalent to officially recognized professions such as electricians or electronics technicians for installation.

The installation must be carried out in accordance with the applicable national regulations and the local guidelines of the electricity supplier. The user manual for the product is available at www.rehau.com/neasmart2.

The electrical installation must be carried out in a voltage-free state. The system is live and can cause danger to life due to electrical voltage. Before opening, always disconnect from the mains and secure all system components so that they cannot be accidentally switched on. Check for the absence of voltage before starting any installation work.

Product Usage Instructions

  1. Ensure that you have professional knowledge equivalent to officially recognized professions such as electricians or electronics technicians for installation.
  2. Read the user manual carefully before starting the installation work.
  3. Disconnect from the mains before opening and secure all system components to prevent accidental activation.
  4. Check for the absence of voltage before starting any installation work.
  5. Carry out all installation work in a voltage-free state.
  6. After installation, connect to the final power supply network only after completing the installation work.
  7. For more information on the product, refer to the user manual available at www.rehau.com/neasmart2.

Safety Instructions and Product Conformity

Risk of life through electrical shock! The electrical installation must follow the applicable national standards and guidelines as well as any specific requirements of your local energy supplier. These instructions are intended for use by a qualified person who is holding an official certificate in one of the following professions: electrician or electronics engineer.
Always read the instructions prior to commencing the installation. Connection to the final power supply must only be carried out after the installation is complete.
Hereby, REHAU AG + Co declares that the radio equipment type Nea Smart 2.0 is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.rehau.com/neasmart2

System Overview

REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.1

Scope of Delivery

REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.2

Wall Installation

REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.3REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.4

DIN Rail Installation

REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.5

Electrical voltage! Danger to life!
The system is live.

  • Prior to opening always disconnect from the mains and secure all components of the system in such a way that they cannot accidentally be switched on.
  • Disconnect external voltages at the relay contacts and secure against unintended activation.
  • Check for the absence of voltage!

Diagrams

REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.6REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.7

REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.8REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.9

Electrical terminations

REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.10

  • Solid cable:0,5-1,5 mm²
  • Multiple stranded cables:1,0-1,5 mm²

REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.11REHAU-NEA-SMART-2.0-Room-Thermostat-FIG.13

Freely configurable

  • Zone Bus
  • Digital Input 1
  • Zone 9-12
  • Relay 1 5 A, Class 2
  • Relay 2 5 A, Class 2
  • Fuse T2A

This document is protected by copyright. All rights based on this are reserved. No part of this publication may be translated, reproduced or transmitted in any form or by any similar means, electronic or mechanical, photocopying, recording or otherwise, or stored in a data retrieval system.
Our verbal and written advice with regard to usage is based on years of experience and standardized assumptions and is provided to the best of our knowledge. The intended use of REHAU products is described comprehensively in the technical product information.  The latest version can be viewed at www.rehau.com/TI. We have no control over the application, use or processing of the products. Responsibility for these activities, therefore, remains entirely with the respective user/processor.
Where claims for liability nonetheless arise, they shall be governed exclusively according to our terms and conditions, available at www.rehau.com/conditions, insofar as nothing else has been agreed upon with REHAU in writing. This shall also apply to all warranty claims, with the warranty applying to the consistent quality of our products in accordance with our specifications. Subject to technical changes.

Additional information

© REHAU Industries SE & Co. KG
Rheniumhaus
95111 Rehau
954644 03.2022

REFERENCE

DOWNLOAD MANUALS:

REHAU NEA SMART 2.0 Room Thermostat Installation Guide

REHAU-NEA-SMART-2.0-Room-Thermostat-LOGO

REHAU NEA SMART 2.0 Room Thermostat Installation Guide

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *