Pelican TS200H Wireless Thermostats
INTRODUCTION
The Pelican Internet-Enabled Thermostat with Humidity provides commercial customers with virtual climate management. The TS200H delivers accurate temperature management, humidity management, leading-edge energy efficiency, built-in safeties and alarming, and fine-tuned comfort. Coupled with the Pelican Web App, the TS200H tracks space temperature, humidity levels, and HVAC operational data in real-time and historically. All information is displayed in real-time online and is viewable on any Internet-connected device.
MESH WIRELESS NETWORK
- The TS200H communicates wirelessly with a GW400 to reach the Internet. Each TS200H has built-in state-of-the-art wireless mesh network communication and repeating.
FAULT ALARMING
- Built-in system and space analytics with automated email or text message alerts when a fault is detected.
WEB APP
- Virtual and central management of TS200H available on all smart phones, tablets, and PCs. Directly manage thermostat temperature and humidity levels through a web browser. Designed for intuitive control over multiple thermostats.
HISTORICAL TREND DATA
- Online viewable historical data of space temperature, set points, humidity level, HVAC demand, and fan demand.
INSTALLATION
- Industry standard HVAC terminals utilize existing thermostat wire. Included with TS200H is Pelican’s innovative limited wiring relay pack (WM500) used in applications where there are only three (3) wires to the HVAC unit.
SCHEDULING
- Through the Pelican Web App you can schedule the TS200H thermostat for daily, 5-2, or 7-day schedules. Thermostats can also be scheduled as groups, for simple multi-thermostat management.
Specifications
- POWER
- Hardwire: 24VAC, 60Hz; 50 mA
- Voltage Range: 23 – 30VAC
- Relay Current: 1.0A running
- COMPATIBILITY
- 24VAC gas, electric, or oil heating systems.
- Conventional and Heat Pump
- Zone Damper Actuator
- WIRING
- Conventional: R, RC, W, W2, Y, Y2, G, C, Dh, H
- Heat Pump: R, RC, O/B, AUX, Y, Y2, G, C, Dh, H
- Damper Actuator: R, C, Y, Y2, W, W2
- SYSTEM PROTECTION
- Four-Minute Compressor Short-Cycle Protection
- Temporary Schedule Override
- Auxiliary/Emergency Heat Efficiency Algorithm
- Keypad Lockout
- Trend Data Analytics and Fault Monitoring
- Humidity Dead Band Protection
- THERMOSTAT RANGE
- Operating Range: -4°F to 122°F
- Differential Temperature: ±0.5°F
- Operating Humidity (%RH); 5 to 90% RH; non-condensing
- Humidity Setting Range: 10 – 80% RH
- Dehumidify Setting Range: 20 – 90% RH
- Storage Temperature: -20°F to 160°F
- SIZE
- Inch: H 3.5 x W 5.97 x D 1.5
- mm: H 89 x W 150 x D 38
- Horizontal Mounting
Designed and assembled in the USA
Warranty
- 5-Year Limited Warranty
CONTACTS
Pelican Wireless Systems
- 2655 Collier Canyon Road, Livermore CA 94551
- (888) 512-0490
- [email protected]
- www.pelicanwireless.com
Copyright @ 2019. Pelican Wireless Systems. All Rights Reserved.
Reference
Download Manual:
Pelican TS200H Wireless Thermostats Product Specification Guide
Other Manual:
Pelican TS200H Internet Programmable Thermostat Installation Guide
Pelican TS200H Wireless Thermostats Product Specification Guide