NorthQ NQ-500-EU wireless radiator thermostat
The Heating Executive
Danfoss Living Connect is an electronic wireless radiator thermostat which provides energy efficiency and comfort control. NorthQ provides the platform HomeManager through which you can control the thermostat from your phone, PC or laptop without any monthly fees.
To use Danfoss Living Connect you need a NorthQ gateway (Q-Stick, Q-Gate, Q-Gate Pro), which provides the connection between the Danfoss Living Connect and your computer or mobile device.
How It Works
Benefits
Smarter Heating System, Lower Heating Bill
With Danfoss Living Connect you can easily control your heating from distance, make heating schedules and start saving on your bill.
Automatic Control
Danfoss Living Connect allows you to remotely control the temperature and set automatic daily heating and vacation schedules to enhance comfort and save up to 23% on your heating bill.
Manual Control
Manual control overrides the existing preset schedule until the next scheduled event. If you feel too hot or cold you can simply change the temperature set-point manually at the thermostat or from your computer or phone.
Improve Your Energy Consumption Behavior
Having the overview of the heating schedules makes you more aware and motivated to reduce heating expenses by lowering the temperature set-point in your home.
Feel The Heat In Your Home
Using Danfoss Living Connect and the HomeManager platform allows you to increase comfort just by one click, even your kid can do it.
Automatic Synchronizing Of The Room Temperature
When controlled through HomeManager the system automatically synchronizes the temperature set point between the thermostats in the same room and helps you to optimize your energy consumption.
Open Window Detection
Danfoss Living Connect features an open window detection system.
This automatically closes the valve if the room temperature falls dramatically. This reduces wasteful heat loss and unnecessary energy costs.
Automatic Valve Exercising
To keep the radiator valve functional and at its best, Danfoss Living Connect automatically exercises the valve once per week by opening it fully and then returning it to its normal setting.
Accurate Temperature Control
The built-in sensors allow it to measure and control the actual room temperature very accurately.
Frost Protection
The system doesn’t go lower than 5°C in order to avoid burst pipes during the winter.
Works On Every Device, Everywhere
Danfoss Living Connect is designed to work on Android, iOS and Windows devices.
Plug & Play Installation
With the easy to follow instructions, Danfoss Living Connect takes approximately 10 minutes to install, without the need of a certified technician.
Expandable & Customizable
Danfoss Living Connect can easily be used with all NorthQ products like Q-Power, Q-Gas, Q-Plug and other compatible 3rd party Z-Wave devices.
Technical Specifications
- Compatible with most radiator valves.
- 24 months average battery lifetime.
- Supports wide range of 3rd party Z-Wave certified devices.
Reference
Download manual:
NorthQ NQ-500-EU wireless radiator thermostat User Manual
Leave a Reply