Neutral T6861 Fan Coil Room Thermostat
SPECIFICATION
- Warranty: 1 Year
- Project Solution Capability: graphic design
- Place of Origin: Fujian, China
-
Power Consum: <1.5W
-
Power Supply: 110(+/-10%)VAC,220(+10%,-15%)VAC
-
Accuracy: +/- 1°C at 21 °C
-
Cycle times: 100000
-
Display range: 0-37°C
-
After-sale Service: Online technical support
-
Design Style: Modern
-
Brand Name: Neutral
-
Frequency: 50/60HZ
INTRODUCTION
The Neutral T6861 Fan Coil Room Thermostat is a device used to control the temperature in a room with a fan coil unit. It is designed to be easy to use and install and provides precise temperature control to ensure maximum comfort while reducing energy consumption.
The thermostat features a large, easy-to-read LCD display with backlighting, which shows the current temperature and allows you to easily adjust the set point temperature. It also has a variety of programmable settings, including temperature set points, fan speed control, and time schedule, which can be customized to fit your specific needs.
The Neutral T6861 Fan Coil Room Thermostat is compatible with a wide range of fan coil units and is suitable for use in residential and commercial applications. It is designed to be durable and reliable, with a long lifespan and low maintenance requirements.
WHAT IS IN THE BOX
- Thermostat
- External Sensor
- User Manual
- Screws
General
These digital thermostats are made to work with fan coil systems that have 3-speed fans and valves. Including:
- 4-pipe manual or automatic changeover and
- 2-pipe cool only/heat only/manual changeover
- 3-speed fan control, manual or automatic
- On/off valve management
- Manual or automated fan speed selection is available.
- 110 or 220 volts
- Green or blue with a choice of horizontal or vertical alignment
Features
- Blue or Green color with Horizontal or Vertical version
- 110vac/220vac, 50/60HZ
- 3 fan Speed
DISPLAY
MODEL SUMMARY
APPLICATION
HOW TO WORK
- The thermostat senses the temperature in the room through its built-in temperature sensor.
- The user sets the desired temperature using the thermostat’s control panel.
- If the current temperature is higher than the desired temperature, the thermostat sends a signal to the fan coil unit to turn on and begin cooling the room.
- Once the temperature reaches the desired level, the thermostat sends a signal to the fan coil unit to turn off.
- If the temperature drops below the desired level, the thermostat sends a signal to the fan coil unit to turn on the heating element and begin heating the room.
- Once the temperature reaches the desired level, the thermostat sends a signal to the fan coil unit to turn off the heating element.
INSTALLATION
- Turn off the power to the fan coil unit.
- Remove the existing thermostat and mounting plate from the wall.
- Mount the T6861 thermostat mounting plate to the wall using screws and anchors, if necessary. Ensure that the mounting plate is level.
- Connect the wires from the fan coil unit to the terminals on the T6861 thermostat base as follows:
- Connect the red wire to the R terminal.
- Connect the yellow wire to the Y terminal.
- Connect the blue wire to the B terminal.
- Connect the green wire to the G terminal.
- Push the excess wire back into the wall and attach the T6861 thermostat base to the mounting plate.
- Install two AAA alkaline batteries into the T6861 thermostat base.
- Snap the T6861 thermostat cover onto the base.
- Turn on the power to the fan coil unit.
- Set the desired temperature on the T6861 thermostat and test the unit to ensure that it is functioning properly.
FAQS
What is the T6861 thermostat?
The T6861 thermostat is a fan coil room thermostat designed for controlling fan coil units and other HVAC equipment in residential and commercial buildings.
What is the function of the T6861 thermostat?
The T6861 thermostat controls the operation of HVAC equipment, such as fan coil units, by turning them on or off depending on the temperature of the room.
How does the T6861 thermostat work?
The T6861 thermostat works by sensing the temperature in the room and comparing it to the temperature set by the user. If the temperature is too high or too low, the thermostat sends a signal to the HVAC equipment to turn on or off.
What type of HVAC equipment can the T6861 thermostat control?
The T6861 thermostat can control fan coil units and other HVAC equipment that use a 2-pipe or 4-pipe system.
What is the temperature range for the T6861 thermostat?
The T6861 thermostat can be set to a temperature range of 10°C to 30°C.
Is the T6861 thermostat programmable?
No, the T6861 thermostat is not programmable. It is a basic thermostat that only allows the user to set the desired temperature.
Is the T6861 thermostat easy to install?
Yes, the T6861 thermostat is easy to install and can be mounted on a standard electrical box.
Can the T6861 thermostat be used with a remote sensor?
Yes, the T6861 thermostat can be used with a remote sensor to provide more accurate temperature sensing.
What is the warranty period for the T6861 thermostat?
The warranty period for the T6861 thermostat is typically one year from the date of purchase.
Where can I purchase the T6861 thermostat?
The T6861 thermostat can be purchased from HVAC equipment suppliers and online retailers.
What is a fan coil room thermostat?
A fan coil room thermostat is a device that controls the operation of a heating or cooling system in a building.
How does a fan coil room thermostat work?
A fan coil room thermostat works by sensing the temperature of the room and sending a signal to the heating or cooling system to turn on or off as necessary to maintain the desired temperature.
What types of heating and cooling systems can a fan coil room thermostat be used with?
Fan coil room thermostats can be used with a variety of heating and cooling systems, including forced air systems, hot water systems, and steam systems.
Can a fan coil room thermostat be used to control multiple heating or cooling zones?
Yes, some fan coil room thermostats are designed to control multiple heating or cooling zones within a building.
What are some common features of fan coil room thermostats?
Common features of fan coil room thermostats include programmable temperature settings, digital displays, and remote control capabilities.
How do I install a fan coil room thermostat?
Installation instructions for a fan coil room thermostat will vary depending on the specific model and the heating or cooling system it is being installed with.
How do I troubleshoot a problem with my fan coil room thermostat?
If you are experiencing problems with your fan coil room thermostat, the first step is to check the power source and make sure the thermostat is properly connected to the heating or cooling system
Leave a Reply