Nedis ZBHTR10WT Zigbee Smart thermostat
Intended use
- The Nedis ZBHTR10WT is a radiator thermostat.
- This product requires the Nedis Zigbee Gateway (WIFIZBxxx) to use product wirelessly.
- The temperature can be set manually or via the Nedis SmartLife App.
- The product is intended for indoor use only.
- The product is not intended for professional use.
- This product can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved.
- Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
- Any modification of the product may have consequences for safety, warranty, and proper functioning.
Specifications
| Product | Zigbee Radiator Control |
| Article number | ZBHTR10WT |
| Dimensions (l x w) | 89 x 57 mm |
| Interface nut | M30 x 1.5 mm |
| Weight | 192g |
| Power input | DC3V (2x AA not included) |
| Max. radio transmits power | 9 dBm |
| Frequency range | 2405 – 2480 MHz |
| Wireless distance | ≥30 meters in the open air |
| Temperature settings range | Automatic mode Manual mode
Anti-freezing mode |
5 °C ~ 30 °C
5 °C ~ 30 °C 5 °C ~ 15 °C |
| Measurement temperature | 0 °C ~ 50 °C | |
| Measurements intervals | 2 minutes | |
| Valve stroke | Max. 6 mm | |
| Noise level | <35 dBa | |
| Environment temperature | -20 °C ~ 65 °C | |
| Storage temperature | 0 °C ~ 40 °C | |
| Max. water temperature | 90 °C | |
| Environment standards | RoHS | |
Main parts
- Ring nut
- Body
- Thermostat wheel
- LCD display
- Fault
- Low battery
- Set temperature
- Window Detection
- Automatic mode
- Child lock
- Network indicator
- Installation mode
- Manual mode
App Overview
- Battery status
- Set temperature
- Room temperature
- Manual mode
- Automatic mode
- Child lock
- Valve detection
- Temperature dial
- Temperature range
- Anti-freezing mode
- Window Detection
Safety instructions
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep this document for future reference.
- Only use the product as described in this document
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not drop the product and avoid bumping.
- Keep your distance from flammable objects.
- Do not expose the product to water or moisture.
- Children should be supervised to ensure that they do not play with the product.
- Always purchase the battery recommended by the product manufacturer for the product.
- Do not use any battery which is not designed for use with the equipment.
- Use only the cell or battery in the application for which it was intended.
- Do not mix cells of different manufacture, capacity, size or type within a product.
- Observe the plus (+) and minus (–) marks on the cell, battery, and equipment and ensure correct use.
- Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
- Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards
Placing the batteries
- Use only size AA batteries for this product.
- Do not use rechargeable batteries.
- Rotate the body A2 counterclockwise, and pull the body open.
- Place 2 size AA batteries (not included) into the battery compartment.
- Make sure to match the (+) and (-) polarity markings.
- The current temperature A7 and installation mode Ae lights up on the LCD display A4.
- Align the marking on A2 to the ‘TOP’ marking on the ring nut A1.
- Rotate A2 clockwise.
Switching between modes
Press A4 to switch between three modes. Automatic mode A9, Manual mode Ar and Anti-freezing mode.
Automatic mode
- To use the automatic mode, make sure that the thermostat is connected to the Nedis Zigbee gateway and your wi-fi network.
- The thermostat automatically switches to the desired temperature.
- Double tap automatic mode B5 to add or change time schedules.
- Automatic mode can be set at multiple temperatures.
- For example, 21°C when you are at home, 17°C when you are sleeping, and set at 15°C when you are away from home.
Manual mode
- Rotate A4 to manually set the temperature.
- The temperature will stay the same unless you change the temperature again.
- The temperature range is 5~30°C.
Anti-freezing mode
- Set the thermostat at anti-freezing mode if you leave your home for a longer time.
- This will protect the water pipes from freezing at low temperatures.
- The temperature range is 5~15°C.
Set child lock
- Set the child lock to prevent children from playing with the thermostat.
- If the child lock is set, it locks all operations on the product.
- Press and hold A4 for more than 3 seconds to switch on the child lock.
- The child lock symbol Aq appears on the display.
- Press and hold A4 for more than 3 seconds to switch off the child lock.
Installing the Nedis SmartLife app
- Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
- Open the Nedis SmartLife app on your phone.
- Create an account with your mobile phone number or your e-mail address and tap Continue.
- Enter the received verification code.
- Create a password and tap Done
- Tap Add Home to create a SmartLife Home.
- Set your location, choose the rooms you want to connect with and tap Done.
Connecting to the Zigbee gateway
Make sure the Zigbee gateway is connected to the Nedis SmartLife app. For information on how to connect the gateway to the app, consult the manual of the gateway.
- Open the Nedis SmartLife app on your phone.
- Select the Zigbee gateway to enter the gateway interface.
- Tap Add subdevice.
- Quickly press A4 three times.
- The network indicator Aw flashes.
- The product appears in the app when the product is successfully connected to the gateway.
Using the app
Open the Nedis SmartLife app on your phone.
Set the mode selection
- Tap the automatic button B5 for automatic mode. Tap it again to add or change time schedules.
- Tap the manual button B4 for manual mode.
- Tap the anti-freezing button Bq for anti-freezing mode.
Set the temperature
Drag the temperature dial B8 to set the temperature.
Set child lock
- The child lock can be switched on or off in the app.
- Tap the child lock button B6 to switch the child lock on or off.
- Switches on or off automatically.
Set window detection
- If the thermostat detects an open window, the valve will be closed for 30 minutes to save energy.
- The window detection is on by default.
- Tap the window detection button Bw to switch the window detection function on or off.
Set valve detection
- The valve detection is on by default.
- Tap the valve detection button B7 to switch the valve detection function on or off.
Declaration of Conformity
We, Nedis B.V. declare as manufacturers that the product ZBHTR10WT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes but is not limited to the RED 2014/53/EU regulation. The complete Declaration of Conformity (and the safety data sheet if applicable) can be found and downloaded via: nedis.com/zbhtr10wt#support
Zigbee Radiator Control
For more information see the extended manual online: ned.is/zbhtr10wt
For additional information regarding compliance, contact customer service:
- Web: www.nedis.com
- E-mail: [email protected]
- Nedis B.V., de Tweeling 28
- 5215 MC ’s-Hertogenbosch, the Netherlands
REFERENCE
DOWNLOAD MANUAL
Nedis ZBHTR10WT Zigbee Smart thermostat Quick Start Guide
Other Manual:
Nedis ZBHTR10WT Zigbee Smart thermostat Product Specifications Guide
