Momit Home Smart Thermostat Installation guide

Momit Home Smart Thermostat

Products Presentation

The Momit Home system is made up of 3 devices:

•  Gateway
•  Thermostat
•  Extension Kit*

Characteristics

Gateway
The Gateway is a device that is connected to Internet with an Ethernet cable. It uses wireless 802.15.4 connectivity technology to communicate with other momit Home devices. The Gateway makes it possible for you to control momit Home from your smartphone, tablet or computer by means of the momit App.

• Platform registration by means of a QR code
• 5V power input (USB)
• Wireless: IEEE 802.15.4
• LED status display
• Ethernet interface
• CE
• RoHS
• Dimensions: 123 x 123 x 44 mm
• Weight: 150 g

Thermostat
Replace your old thermostat with a new smart one. Easy to fit, all you have to do is to remove the current thermostat and fit the momit Home Thermostat.

• Easy to fit
• Boiler control
• Temperature up/down, boiler on/off buttons
• iOS, Android, Windows Phone and Blackberry mobile APP
• Platform registration by means of QR code
• Power input 2 alkaline AA batteries
• Wireless: IEEE 802.15.4
• Temperature, humidity and presence sensor
• +-0.3ºC temperature accuracy
• LED display
• Relays: 2A at 30 VCC 0.5A at 125 VAC
• CE
• RoHS
• Dimensions: 100x100x25 mm
• Weight: 150 g

Extension Kit

This device enables momit Home Thermostat to control a boiler or underfloor heating wirelessly

• An On/Off boiler button
• Platform registration by means of QR code
• 110V/230V 50/60Hz power input
• Wireless: IEEE 802.15.4
• 12A relay
• LED display
• CE
• RoHS
• Dimensions: 103x107x27 mm
• Weight: 150 g

Possible configurations

This section deals with the different momit device combinations to help you select the one that best adapts to your home and needs. The possibilities are as follows

Boiler heating systems:

• Gateway + Thermostat: This combination enables you to control your home heating at all times no matter where you are. The Gateway connects your heating system to Internet. Accordingly, you can control your thermostat by means of the momit App over your smartphone, tablet or computer. You can add as many thermostats as you like.
• Gateway + Thermostat + Extension Kit: This combination provides you with all the functions of the previous option with the added advantage of being able to control the boiler with a mobile device that can be placed in any room in the house. You can add as many thermostats as you like

Warning!

• Read these instructions carefully before starting the installation. momit devices must be installed in accordance with current regulations.
• If you are going to install an Extension Kit, make sure that the power has been cut off before proceeding with the installation.

Gateway

Thermostat

Extension Kit

Gateway

• Jack connector
• On/Off
• MicroUSB connector
• Ethernet
• Reset

You must connect this device first. Follow these steps to do so:

• Connect it to the mains by means of the USB cable (3)
• Connect the Ethernet cable (4) to the router in your home.
• Wait until the 3 status LEDs are on before continuing with the installation

Thermostat

• Remove the connection box at the back of the thermostat (part B).
• Insert the boiler connection wires through the gap in the part.
• Screw the connection box to the wall. Use the two screws that come in the pack to do so.
• Fit the connection wires as shown in the diagram

Connection diagram

If the wire is rigid you can insert it directly. When it is a flexible wire you may need the help of a punch or pen tip. Press as indicated in the drawing (1) and insert the wire (2).

• Insert two AA batteries.
• Fit the thermostat body (part A) into the connection box (part B) as shown in the following drawing.
• After the thermostat is switched on it will synchronise automatically with the Gateway.
• This process may take less than a minute.
• The device connection LED will be on if everything is working properly. As of now both devices have been connected

Buttons

• Raise the set temperature
• Lower the set temperature
• On/off mode
• Brightness mode

Thermostat placement

Extension kit

•  Insert the installation wires. You can do so in two ways
•  Connect the relay wires to the corresponding terminals, as per the connection diagram, to enable the Extension Kit to control the boiler.

Connection diagram

How to connect the wires:

You are recommended to connect the power wires at the end. Take safety measures when working with electricity. Cut off the current in the area where you are working until you have completed the installation. – Extension Kit requires 110 to 230 VAC input. Connect up L and N terminals. – You can control a boiler with Extension Kit by connecting the 2 control wires to W2 and W2C.

Identify

Make sure the power has been cut off to the boiler when undertaking these operations. Identify the thermostat terminals in the boiler manual. They are normally indicated with the following tags LSLR, TA or COM-NO. You can also identify them by a branch between the two thermostat terminals, in which case you must remove this branch

Connect the boiler adapter wires to where the branch is to be found.

Power

The Extension Kit requires 110 to 230 VAC input. The power terminals from the boiler usually have L/N or P/N tags

Buttons

• Device On/Off
• Manual boiler control whenever there is no Internet connection
• Reset

The device connection LED will be on if everything is working properly.The Extension Kit is connected to Gateway as of that moment

Customise your device

Momit Home Thermostat has interchangeable frames. Follow these steps to change the frame:

• Remove the cover and take out the batteries.
• Insert a pen into the hole under the batteries
• Exert pressure until the front casing comes away and pull it out.
• Press the body of the thermostat backwards while bringing the frame forward until it comes out.
• Position the new frame and, while in the same position as in the previous step, push the frame until it fits flush.
• Put the front casing back by placing the bottom part as shown in the drawing
• Push until it fits flush. Insert the batteries again and close the cover

You can use momit Home over your smartphone, tablet or computer from the following URL: http://home.momit.com

Download the momit App free of charge at:

To begin to use it, follow the instructions in the User Manual you can find on our website: www.momit.com

Customer services: [email protected]

CE Declaration of Conformity
Green Momit, S.L. hereby declares that these devices are in compliance with the basic requirements and other relevant provisions of Directive 1999/5/EC.

Safety Precautions
These devices must be installed in accordance with current regulations. Only use the power socket adapter supplied. These devices are only for indoor use. Before inserting the batteries, check that the contacts in the devices and those on the batteries are clean. Where appropriate, clean them. Bear in mind (+/-) polarity when inserting the batteries. Do not throw the batteries into the fire. Do not short circuit them. Do not take them apart. Keep the batteries out of the reach of children. Get medical assistance immediately if a battery is swallowed. Do not try to repair devices yourself. There is a customer services department at your disposal. Any change or modification not expressly approved in this manual may annul user entitlement to the functioning and/or guarantee service for these devices. This device has not been designed for use by people (including children) with physical, sensorial or mental disabilities, or with a lack of experience and knowledge unless a person responsible for their safety is watching them or provides them with instructions of how to use the devices. Children must be watched to make sure that they do not play with the devices.

Reference:

Download manuals:

Momit Home Smart Thermostat Installation Guide

Momit Home Smart Thermostat Installation Guide