Meitay-tec ETN24-SUPER-3S-FP-PROG Programmable ThermostAT-FEATURED

Meitay-tec ETN24-SUPER-3S-FP-PROG Programmable Thermostat Product Specification Guide

Contents hide

1 Meitay-tec ETN24-SUPER-3S-FP-PROG Programmable Thermostat

2 INTRODUCTION

3 Features

4 Wiring diagram

5 REFERENCE:

Meitay-tec ETN24-SUPER-3S-FP-PROG Programmable Thermostat

Meitay-tec ETN24-SUPER-3S-FP-PROG Programmable Thermostat-PRODUCT

INTRODUCTION

The ETN-24-Super-Prog-7 Days-US is a stylish thermostat that is well-suited for commercial and residential applications. It can control a large variety of HVAC systems with either Heat/cooling or Heat Pump configurations and offers a selectable number of heating and cooling stages. Its 7-Day program, with 1 period (Set Cool/Set Heat) per day, is easy to use and can provide 24-hour comfort as well as energy savings. Overall, the ETN-24-Super-Prog-7 Days-US is an attractive, wall-mount thermostat with a large and easy-to-read display.

Features

Wall-mount, 24VAC thermostat
DIP switch selectable configurations:
- Heat/Cool or Heat Pump system
- Electric or Oil/Gas heat system
- Heat Pump in Cool or Heat
7-day programmable – 1 period per day, each with Set Heat and Set Cool
Separate Cooling & Heating set points
Emergency Heat available in Heat Pump mode
°C scale, 24 hr clock
Filter counter in hours- range: 0-900 (adjustable)
Offset for temp. reading adjustment – ±6°C
Set point limits for Cool & Heat (5…30°C)
External Temperature Sensor- option
Lock – Unlock thermostat buttons
Voltage-free, normally-open fault input. Will show signal on the thermostat when active
3 minutes compressor delay – optional (DIP switch selectable)